| Author |
Message |
|
BroncoRaider
Official CCB Member
Joined: Thu Oct 22, 2015 11:47 am
Posts: 531
Location: Stapleton
|
 1.5" x .25" wall DOM I'm looking for a couple of sticks of DOM to work on my steering linkage. I called a couple of places and they ranged from $110-$240 PER STICK.
Do any of you hoarders have 2 pieces of 1.5" OD, .25" wall DOM? I need them to be about 54" each. Let me know, thanks.
Tim
_________________
“Buddy” - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
|
| Mon Jun 07, 2021 3:48 pm |
|
|
|
phyler
Official CCB Member
Joined: Sat Oct 02, 2010 9:41 pm
Posts: 1201
Location: Erie
|
Re: 1.5" x .25" wall DOM If you can get a 20' stick of DOM for $110, do it! I'm going to say that you are in for $100+ in order to get the two 54" pieces you need.
_________________
1975 Ranger Edition that I've had longer than I've been without it.
|
| Mon Jun 07, 2021 5:34 pm |
|
|
|
Gunnibronco
Official CCB Member
Joined: Mon Jan 03, 2011 6:07 pm
Posts: 4074
Location: Gardnerville, NV
|
Re: 1.5" x .25" wall DOM
_________________
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
|
| Mon Jun 07, 2021 6:50 pm |
|
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
1.5" x .25" wall DOM Iam going to buy two 20ft sticks and split one with Tim. Hinton has them for $120
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Mon Jun 07, 2021 9:30 pm |
|
|
|
BroncoRaider
Official CCB Member
Joined: Thu Oct 22, 2015 11:47 am
Posts: 531
Location: Stapleton
|
Re: 1.5" x .25" wall DOM
_________________
“Buddy” - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
|
| Mon Jun 07, 2021 9:34 pm |
|
|
|
phyler
Official CCB Member
Joined: Sat Oct 02, 2010 9:41 pm
Posts: 1201
Location: Erie
|
Re: 1.5" x .25" wall DOM
_________________
1975 Ranger Edition that I've had longer than I've been without it.
|
| Tue Jun 08, 2021 5:56 am |
|
|
|
BroncoRaider
Official CCB Member
Joined: Thu Oct 22, 2015 11:47 am
Posts: 531
Location: Stapleton
|
Re: 1.5
_________________
“Buddy” - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
|
| Tue Jun 08, 2021 2:32 pm |
|
|
|
phyler
Official CCB Member
Joined: Sat Oct 02, 2010 9:41 pm
Posts: 1201
Location: Erie
|
Re: 1.5" x .25" wall DOM Shipping is always ridiculous. It's not consistent either. I've spent almost $200 across three vendors recently to get my suspension stuff shipped. Wild Horses was by far the best when it came down to it.
Sent from my Pixel 5 using Tapatalk
_________________
1975 Ranger Edition that I've had longer than I've been without it.
|
| Tue Jun 08, 2021 3:16 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: 1.5" x .25" wall DOM I've got a spare 8' which should cover you unless you're doing something unusual. My tie rod piece are about 33" and 43". I've used .250 wall if you're going to wheel it at all.
|
| Tue Jun 08, 2021 10:42 pm |
|
|
|
