|
|
It is currently Sat Apr 20, 2024 4:23 am
|
|
Page 1 of 1
|
[ 6 posts ] |
|
advice/opinions on a new 110v welder or run power to shop
| Author |
Message |
|
Brianut
Official CCB Member
Joined: Thu Oct 14, 2010 7:06 am
Posts: 350
Location: Parker,Co
|
 advice/opinions on a new 110v welder or run power to shop I recently moved to Franktown and have a "barn" that I will eventually need to run power to and have more recently acquired some welding work to be done, it is lighter steel art type stuff. I have a 220v unit already but no power at shop and it would be a bit to run an extension cord that far from the house.
I am currently in the middle of a major house remodel and hadn't planned on getting power to the shop til well into the 2015 year, however this job offer has changed that.
welder I have is a weldpack 180 Lincoln
my options are:
try and get power there officially either sub from the house or another run from the pole(my 1st choice no idea of cost)
make a 70 foot extension cord to run from house and use my 220v welder
buy a 220v capable generator to run my current welder
buy a 110v wire feed and run a big extension cord to the shop or use mu 110 genny if it could handle it
any thoughts or opinions I think I have about a month before the work needs to begin full specs coming on Monday.
no idea what the budget is for this I just would rather not spend money twice, or on something that wouldn't be used again.
lemme know what you alls think
|
| Sat Dec 20, 2014 12:27 pm |
|
|
|
ZOSO
Moderator
Joined: Mon Nov 15, 2010 5:58 pm
Posts: 3906
Location: Henderson, Co
|
Re: advice/opinions on a new 110v welder or run power to sho I have an extension cord thats about 60-70' I use in my garage. I've also ran my welder off a 5kw generator with zero issues on both.
_________________
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
|
| Sat Dec 20, 2014 3:32 pm |
|
|
|
Unaweep
Official CCB Member
Joined: Thu Sep 12, 2013 3:02 pm
Posts: 291
Location: Grand Junction, Co.
|
Re: advice/opinions on a new 110v welder or run power to sho
_________________
1969 Ford Bronco with: 351W, Q-Jet, ARB front locker, 3" Suspension lift, NP435 transmission, 33" Goodyear's, roll cage, body rough.
|
| Sat Dec 20, 2014 4:41 pm |
|
|
|
landshark
Official CCB Member
Joined: Fri Oct 14, 2011 12:16 am
Posts: 3942
Location: Denver, Wash Park Area
|
Re: advice/opinions on a new 110v welder or run power to sho I just made my 60 ft 220 cord. Cost me $280 with everything from Home Depot. Probably could do it cheaper if you shopped around.
_________________
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
|
| Sat Dec 20, 2014 5:00 pm |
|
|
|
Justin
Official CCB Member
Joined: Sun Oct 10, 2010 12:04 am
Posts: 6198
Images: 0
Location: Lakewood
|
Re: advice/opinions on a new 110v welder or run power to sho A long extension cord now can also be turned into two short ones later. Id get a quote to run the sub panel, and if it's not affordable I'd make the extension cord.
|
| Sat Dec 20, 2014 6:26 pm |
|
|
|
Digger
Official CCB Member
Joined: Fri Jun 21, 2013 8:53 pm
Posts: 1276
|
Re: advice/opinions on a new 110v welder or run power to sho Definitely go with the 220V extension.
It's cheaper than a 110V welder.
_________________
Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc.
Build Thread:
Average 23.5 mpg, Best tank: 25.1 mpg
|
| Sun Dec 21, 2014 1:07 am |
|
|
|
|
|
Page 1 of 1
|
[ 6 posts ] |
|
Who is online |
Users browsing this forum: No registered users and 4 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
