My girlfriend hates me and my Bronco

Get answers to Bronco-related technical issues.

Re: My girlfriend hates me and my Bronco

Postby Eck » Thu Aug 29, 2013 2:03 pm

Gunnibronco wrote:If you are running a sealed gas cap, and there is no way for air to replace the fuel you are pulling out, you could cause a vacuum of sorts in the fuel tank. It could make it difficult for the pump to pull from. Have you tried opening your gas cap when the truck won't run?

Just trying to tie the problem to the change of equipment. It could/probably is vapor lock, but I'd hate to see you chase the wrong problem.


That makes sense... I have not tried opening the gas cap but I also don't think the gas cap is air tight-- when I was on the trail when I first had this issue-- when I returned to the Bronco, gas was spilling out the of the filler neck and cap area (with the cap on.)

Just spoke with Toms Bronco and their thought after explaining what I have installed, is that I may not have any sort of venting system in place. They suggested that I could put a small 1/16 size hole at the top of the filler neck just inside the body to allow for vapor ventilation. I have a post-1969 filler neck that has a fuel vent hose that runs back to the top of the filler neck but I do not have the charcoal system that runs off the evap lines and dumps gas back into the engine. They suggested plumbing it exactly how I have it plumbed but that I would either need to run a vented gas cap or I would need to drill a small hole in either the gas cap itself (not possible with a locking gas cap), or at the top of the filler neck.
http://www.tomsbroncoparts.com/pages/sc ... fuel-tank/


Does anybody disagree with this solution?

Here is my cap-- vented or non-vented?
You do not have the required permissions to view the files attached to this post.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Rox Crusher » Thu Aug 29, 2013 4:16 pm

That appears to be a sealed style locking gas cap. I really appreciate locking gas caps as I just had 24 gallons of diesel siphoned out if my F two fiddy at the Denver airport. I don't think they make a locking vented gas cap but I could be wrong.

I would vent the tank using the later style (76/77) rectangular charcoal canister mounted to passenger side firewall. You just run a hose from the tank vent up to the charcoal canister with an inline check valve to keep it from leaking fuel in case off off camber or roll over condition.

This way you would be filtering the vapors rather than just venting them to atmosphere.

This system doesn't use the evaporation tank which is designed to return condensed vapor (liquid fuel) back to the tank (not the engine).

The reason you had fuel leaking out the filler neck is that the tank was full enough such that it couldn't accomodate the fuel which had expanded due to ambient temperature (or you were parked at an angle?).
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
 
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm
Location: Roxborough Park, Colorado

Re: My girlfriend hates me and my Bronco

Postby Kinder » Thu Aug 29, 2013 8:27 pm

The PO of my bronco drilled the small hole just at the body edge of my filler neck. The canister is the better way.
Best to Date MPG: 26.6
User avatar
Kinder
Official CCB Member
Official CCB Member
 
Posts: 4371
Images: 0
Joined: Wed Sep 29, 2010 9:03 pm
Location: Parker, CO

Re: My girlfriend hates me and my Bronco

Postby plumbdoctor » Fri Aug 30, 2013 12:02 am

Even with the evap canister, charcoal vent etc... I had my aux tank puke out from the cap on the New Years run a couple of years ago. Filled tank up too much, once I loosened the cap all was good
Your sh!* is my bread and butter!
User avatar
plumbdoctor
Official CCB Member
Official CCB Member
 
Posts: 568
Images: 0
Joined: Tue Oct 05, 2010 9:17 pm
Location: Golden

Re: My girlfriend hates me and my Bronco

Postby Eck » Sat Aug 31, 2013 9:32 am

Closing this chapter (HOPEFULLY! banghead ). Here is what I did since having this issue:

1. Rerouted driver side dual exhaust into the passenger side exhaust. There are now no exhaust lines anywhere near the fuel lines. It is much quieter, which in my 20's, I probably would have been extremenly dissapointed, but I kind of like it now.
2. Bought a locking vented gas cap. I know a lot of people weighed in on the idea of converting to the later style evap canister, but I just didn't have the patience to do yet another unforeseen upgrade. Maybe down the road-- also, a vented gas cap was a much cheaper solution.
3. Installed an in-line liquid filled fuel pressure guage. I did this first before removing the mechanical pump to see if I was getting any pressure and low and behold, I had no pressure at all registering. I thought the guage was damaged because I thought for sure I would see some sort of pressure. I called JEGS and they told me they were sending a new one at no charge and to just throw that one out. I will say, JEGS has had excellent customer service everytime I buy something from them.
Fuel pressure.JPG


4. Removed the mechanical pump and installed the Carter P4070 as well as a "better" in-line fuel filter. Fired the Bronco up and all is functioning properly-- EVEN the fuel pressure guage. It was reading 4psi right after I fired it up... guessing after it warms up a bit, that number could climb up to 5? Clearly, the mechanical pump was toast.
Carter Pump.JPG



So I am hoping that a combination of exhaust running too close to the line would heat the fuel up way too much, thus causing evaporate in the tank to cause a vacuum type effect because of it not having any venting capabilites, ultimately causing the vapor lock becuase of a bad mechanical pump. Sounds good to me... now I just need to test and hope I don't get stranded somewhere again!

Thanks for everyone's input the last week or so...

:burnout:
You do not have the required permissions to view the files attached to this post.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Gunnibronco » Sat Aug 31, 2013 11:38 am

Nice, Ill be keeping my fingers crossed. I know how frustrating a problem like that can be.

Sent from my C771 using Tapatalk 2
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
 
Posts: 4074
Joined: Mon Jan 03, 2011 5:07 pm
Location: Gardnerville, NV

Re: My girlfriend hates me and my Bronco

Postby Justin » Sat Aug 31, 2013 12:48 pm

Sweet, hope it fixes it for ya.
User avatar
Justin
Official CCB Member
Official CCB Member
 
Posts: 6198
Images: 0
Joined: Sat Oct 09, 2010 11:04 pm
Location: Lakewood

Re: My girlfriend hates me and my Bronco

Postby Eck » Mon Sep 02, 2013 9:20 pm

So I had no issues starting the Bronco since all of my repairs have been done the last couple of days. Took it to run a few errands yesterday and things seemed to be fine. I remembered that when we had installed the Power Steering a few months ago, we had to remove the coil from its location to bolt in the power steering cooler. I had read on CB.com that someone was having some issues with losing power at higher temps and they traced it back to their coil. My coil had actually just sitting pinned in a location fairly close to the block hence probably heating it up. The plug wire running from the dizzy to the coil is too short to route it someplace at the moment so my plan was to get a longer wire and bolt it to the inner fender away from any heat source. However, I went to start it this evening to run and grab dinner and now it won't start. The ONLY thing that I did since it ran yesterday was pick up the coil to take a look at it--- maybe turned it on its side and was looking at the mounting bracket.

When I attempt to start it, it sounds like it has plenty of power, it turns over like it wants to start and I can definitely hear the fuel pump and I have fuel pressure (and I can smell fuel.) My only thought is that this coil is acting up. How can I test the coil? I do have a mutlimeter. Does this sound like it would/could be a bad coil?
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Viperwolf1 » Mon Sep 02, 2013 11:21 pm

Make sure you see 12V to the coil with the key on. If not troubleshoot the ignition wire to the switch.

Should have 1-2 ohms on primary side of coil (between the 2 small terminals, wires disconnected). 7-9K ohms on the secondary side (either small terminal and the high tension terminal).
User avatar
Viperwolf1
Official CCB Member
Official CCB Member
 
Posts: 1485
Joined: Tue May 07, 2013 9:37 pm

Re: My girlfriend hates me and my Bronco

Postby Jesus_man » Tue Sep 03, 2013 1:01 am

I don't know, so I am throwing this out there - doesn't a coil need grounded to the body? You mentioned you moved it. Is it just hanging there?
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
 
Posts: 5987
Joined: Thu Nov 11, 2010 9:36 am
Location: California

Re: My girlfriend hates me and my Bronco

Postby Eck » Tue Sep 03, 2013 7:53 am

Jesus_man wrote:I don't know, so I am throwing this out there - doesn't a coil need grounded to the body? You mentioned you moved it. Is it just hanging there?


I don't think it needs to be grounded from what I have read. It is actually kinda pinned in a location so it doesn't vibrate itself off of the wires-- just for grins, I did try to "ground" the mount to the engine block and re-start and wasn't getting anything.

I took some readings with the multimeter-- was getting close to 7V of power but was getting only .9ohms of primary and less than 7ohms secondary. So-- what does this mean? Bad coil, bad wiring. It is a FORD branded stock coil. No clue how old it is.

Thanks.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Justin » Tue Sep 03, 2013 8:40 am

Your secondary should be something like 5-10,000 ohms. I'd replace it. A failing coil getting hot could account for your issues.
User avatar
Justin
Official CCB Member
Official CCB Member
 
Posts: 6198
Images: 0
Joined: Sat Oct 09, 2010 11:04 pm
Location: Lakewood

Re: My girlfriend hates me and my Bronco

Postby Eck » Tue Sep 03, 2013 10:08 am

Justin wrote:Your secondary should be something like 5-10,000 ohms. I'd replace it. A failing coil getting hot could account for your issues.


Sorry-- by 7, I meant 7k (I am still learning how to use a multimeter). I spent some time on the phone with the wiring whisperer this morning and traced some voltage issues I was having to a bad wire going to the coil. I have fixed that and am now getting proper voltage and the ohms are registering where they should be I think. I still can't get it to turn over but I am hoping that maybe with all the cranking of the engine... it is just flooded. Gonna give it a little time and try to start it up again. If that doesn't work, then I will check for spark and go from there.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Justin » Tue Sep 03, 2013 10:23 am

Gotcha, that makes more sense. The wiring whisperer is the one to be talking to about this for sure! Could be drained battery not spinning the engine fast enough as well, especially if it's older.
User avatar
Justin
Official CCB Member
Official CCB Member
 
Posts: 6198
Images: 0
Joined: Sat Oct 09, 2010 11:04 pm
Location: Lakewood

Re: My girlfriend hates me and my Bronco

Postby Eck » Tue Sep 03, 2013 10:37 am

Justin wrote:Gotcha, that makes more sense. The wiring whisperer is the one to be talking to about this for sure! Could be drained battery not spinning the engine fast enough as well, especially if it's older.


Battery is new within the last 4 months... it sounds like it is cranking ok... just not igniting. I am guessing either flooded or no spark. Hoping to know more later when I have another set of hands to turn the ignition while I check spark.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Eck » Tue Sep 03, 2013 5:18 pm

Here is where I lay dead and beaten:

Per Phil's suggestion, I took the plug wire end on the dizzy coming from the coil off and tried to hold it close to a ground (not sure if I am doing it right since there is a rubber boot on it). I did not see any sort of spark.

I used a spark plug light/tester (http://www.oreillyauto.com/site/c/detai ... t+%26+tune) and followed the directions of plugging the black end into the spark plug-- and then sticking the silver probe into the spark plug wire. I tested the spark plug at the front of the passenger side. NO light whatsoever popped on.

I checked the voltage at the battery and was getting 12.5V and then around 8-9v when turning ignition.

....SO, now what?
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Gunnibronco » Tue Sep 03, 2013 5:57 pm

These things happen, at least you haven't made any "bad" changes, or replaced any good parts. Everything you've done will only help it be reliable down the road. The fuel/exhaust routing, and fuel pump were good reliability upgrades. The old fuel pump was waiting to bite you sooner than later.

Wish I could help with the spark problem, I had a MSD set up from day one, until I went to Ford EFI a couple years ago. So I know squat about the stock ignition. I took a couple weeks to figure my MSD failure out.

Good luck
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
 
Posts: 4074
Joined: Mon Jan 03, 2011 5:07 pm
Location: Gardnerville, NV

Re: My girlfriend hates me and my Bronco

Postby Eck » Tue Sep 03, 2013 6:17 pm

I have almost this exact set-up. Looks like a Ford upgrade a while back. Duraspark ignition module with Ford distributor and coil.
You do not have the required permissions to view the files attached to this post.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

My girlfriend hates me and my Bronco

Postby Colorado75bronc » Tue Sep 03, 2013 6:42 pm

Did you mean that the voltage drops to 8-9 while cranking or just key on, either way that's an issue, it shouldn't drop below 9.6-10v when cranking, if it is that would most likely indicate a weak battery, but obviously no spark is your primary issue, and if just keying on that would be a serious draw, but even with 7v to the coil there should be some spark, unless there is an issue with the module, pickup coil, or wiring, currently the coil sounds like its ok, if I had some more time to look at diagrams and think on it I'd give more input, I haven't dealt with duraspark much, so without doing some reading I wouldn't be to much help, when keyed on, not cranking did you say the voltage to the coil was 7v, if so it's possibly a bad connection, or left over resistor wire, or ballast resistor, ill let the duraspark guru take it from there
Last edited by Colorado75bronc on Tue Sep 03, 2013 6:56 pm, edited 1 time in total.
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
 
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: My girlfriend hates me and my Bronco

Postby Eck » Tue Sep 03, 2013 6:52 pm

Colorado75bronc wrote:Did you mean that the voltage drops to 8-9 while cranking or just key on, either way that's an issue, it shouldn't drop below 9.6-10v when cranking, if it is that would most likely indicate a weak battery, but obviously no spark is your primary issue, and if just keying on that would be a serious draw, but even with 7v to the coil there should be some spark, unless there is an issue with the module, pickup coil, coil, or wiring


Cranking. I think the battery has been drained a little bit considering I've probably tried cranking it at least 20 times today with no start.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby Colorado75bronc » Tue Sep 03, 2013 7:04 pm

Sorry had to edit the post above, meant to type more, accidentally hit reply. Well if you just want to make sure you have battery voltage at the coil with the key on not cranking, if that checks good I would be talking to Phil about either, pickup coil, duraspark module, or wiring to the module from the body, and wiring between the pickup coil, module and ign. coil, in the meantime while your waiting on Phil's response check for broken wires, backed out pins, chafed wires, poor connections at the module or distributor and anything in between
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
 
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: My girlfriend hates me and my Bronco

Postby Eck » Tue Sep 03, 2013 10:44 pm

Colorado75bronc wrote:Did you mean that the voltage drops to 8-9 while cranking or just key on, either way that's an issue, it shouldn't drop below 9.6-10v when cranking, if it is that would most likely indicate a weak battery, but obviously no spark is your primary issue, and if just keying on that would be a serious draw, but even with 7v to the coil there should be some spark, unless there is an issue with the module, pickup coil, or wiring, currently the coil sounds like its ok, if I had some more time to look at diagrams and think on it I'd give more input, I haven't dealt with duraspark much, so without doing some reading I wouldn't be to much help, when keyed on, not cranking did you say the voltage to the coil was 7v, if so it's possibly a bad connection, or left over resistor wire, or ballast resistor, ill let the duraspark guru take it from there


I did spend some time on the phone with Phil this morning following some possibilities. I did find a bad wiring connection that seemed to be limiting voltage to the coil. I fixed that and was getting 12V to the coil and then the 7V was the coil's internal resistor regulating voltage. I think we had determined that the coil is ok. The next set of tests I was going to do was the spark test, which I have done and found that I am not getting spark (which I figured based off the symptoms.)

The little reading I have done on the duraspark is that people either love them or say to get rid of them. I also could not find anywhere that explained how to truly test the module to make sure it is operating correctly. I would guess I could potentially test the wiring to make sure it is sending the correct signal... but not sure how to go about doing that. I guess the extent of my knowledge on this is that I have found their is the correct voltage going to the coil, correct ohms in the coil... and then I am truly stuck what to do next. Clearly I am not getting any level of spark (assuming I am conducting the test right-- I followed directions and it can't be that hard.)

I do have a Jacobs Electric Mileage Marker ignition and coil system that Plumbdoctor gave me, but I wouldn't even know where to start with wiring that thing up right now. I also know that I am planning on putting a Centech wiring harness in this winter and was hoping to upgrade the module at that time. I suppose if the duraspark module is proving to be bad-- winter fixes have just shown up a little early this year.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Re: My girlfriend hates me and my Bronco

Postby plumbdoctor » Tue Sep 03, 2013 11:03 pm

If you want to install the mile marker ign, I do have the paper work for it, I will locate the file and give it to you
Your sh!* is my bread and butter!
User avatar
plumbdoctor
Official CCB Member
Official CCB Member
 
Posts: 568
Images: 0
Joined: Tue Oct 05, 2010 9:17 pm
Location: Golden

Re: My girlfriend hates me and my Bronco

Postby Viperwolf1 » Wed Sep 04, 2013 12:48 am

Here are some troubleshooting procedures. Duraspark is a very good system.
duraspark troubleshooting[1].pdf
You do not have the required permissions to view the files attached to this post.
User avatar
Viperwolf1
Official CCB Member
Official CCB Member
 
Posts: 1485
Joined: Tue May 07, 2013 9:37 pm

Re: My girlfriend hates me and my Bronco

Postby Kinder » Wed Sep 04, 2013 7:20 am

We are running duraspark in Willem's rig and it has been trouble free. If you end up needing a spare module let me know, I think I have one on the shelf.
Best to Date MPG: 26.6
User avatar
Kinder
Official CCB Member
Official CCB Member
 
Posts: 4371
Images: 0
Joined: Wed Sep 29, 2010 9:03 pm
Location: Parker, CO

Re: My girlfriend hates me and my Bronco

Postby Eck » Wed Sep 04, 2013 7:22 am

Thanks Keith. Whenever you track it down let me know. I've got some stuff for you as well. Thanks for the PDF Phil. Kirk, I'll let you know if I determine its the module. May borrow yours until I rewire and most likely add the Mile Marker.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Eck
Official CCB Member
Official CCB Member
 
Posts: 2460
Joined: Thu Oct 25, 2012 8:33 pm

Previous

Return to General 4x4 Technical

Who is online

Users browsing this forum: No registered users and 4 guests

cron