Steering column to firewall bracket/clamp?

[Hawk76]

I'm doing Tom's Flaming River tilt column kit for floor shifter and am need of the mount or clamp setup for attaching the lower column to the firewall. I did a new firewall so I've got good nutplates but the old column was literally welded to that bracket so it got tossed. Does anyone know where I can get what I need?

[Viperwolf1]

I'm sure Don Allison would have those.

[Justin]

A large hose clamp works well.

[akaFrankCastle]

A large hose clamp works well.

Gotta have something to attach the hose clamp to. i.e. the bracket under the steering column.

[427wrangler]

I think I have a bracket and clamp laying around. I look for it later today, if I can find it your welcome to it.

[427wrangler]

I found a column support bracket that bolts on the outside of the firewall, and a bracket that bolts on the inside to hold the column seal, no clamp. Let me know if you want them.

[Hawk76]

Man, this club is something else. I've had an offer to come over to help with my build and now another member digging through his parts to see if he can hook me up.

Thanks guys.