looking for some parts. UPDATED

Missing that critical piece to your build or resto?

looking for some parts. UPDATED

Postby HIX » Thu Jun 14, 2012 7:23 am

I am looking for the following for a 1974 bronco manual:

Smittybuilt style rollbar-found thx hockeydad
Steering wheel with shaft-found thx Bob
sheet metal like inner fender, kick panel - still looking.
fender flares. Only need front but will take all 4 for the right price - found.
4bbl carb and intake - still looking
single exhaust-- just need from the collector to the muffler- found thx Bob
Wiped motor drop bracket - still lookin
Passenger seat latch mount/bracket - still looking
Center console with space for stereo - still looking
Last edited by HIX on Tue Jul 03, 2012 8:21 am, edited 1 time in total.
HIX
Official CCB Member
Official CCB Member
 
Posts: 174
Joined: Tue Feb 15, 2011 11:38 am
Location: Wheat Ridge Colorado

Re: looking for some parts

Postby Gunnibronco » Thu Jun 14, 2012 7:43 am

I've got an Edelbrock 4bbl, intake, pressure reg, fuel pump listed for sale somewhere here. Its been a while so maybe it was deleted, I'll keep looking.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
 
Posts: 4074
Joined: Mon Jan 03, 2011 5:07 pm
Location: Gardnerville, NV

Re: looking for some parts

Postby hockeydad4-22 » Thu Jun 14, 2012 9:38 am

I have a steering wheel and shaft from a '71- three on the tree, the PO left it outside exposed to the sun and weather for who knows how long. The steering wheel - I would call it junk. But the shaft ... that is an unknown. Wiring harness and connection is still there.
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
 
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm
Location: Highlands Ranch Colorado

Re: looking for some parts

Postby B.O.B. » Thu Jun 14, 2012 1:54 pm

I also have a steering wheel and the exhaust from manifolds to muffler. 2 small holes in it from my o2 sensors but can be welded pretty easy.
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
B.O.B.
Official CCB Member
Official CCB Member
 
Posts: 771
Joined: Thu Nov 11, 2010 9:31 am

Re: looking for some parts

Postby Gunnibronco » Thu Jun 14, 2012 4:01 pm

Looks like my sale listing was purged. If you are interested, let me know & I'll shoot you a price, or I'll try to post up a new ad soon.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
 
Posts: 4074
Joined: Mon Jan 03, 2011 5:07 pm
Location: Gardnerville, NV

Re: looking for some parts

Postby hockeydad4-22 » Thu Jun 14, 2012 5:49 pm

Come to think of it, I have a smittybuilt type roll bar as well, how about $100 for the roll bar and steering shaft. the steering wheel comes with it but I doubt you will want to use it.
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
 
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm
Location: Highlands Ranch Colorado

Re: looking for some parts

Postby Gunnibronco » Thu Jun 14, 2012 6:40 pm

Here I relisted my carb set up:
viewtopic.php?f=8&t=4278
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
 
Posts: 4074
Joined: Mon Jan 03, 2011 5:07 pm
Location: Gardnerville, NV

Re: looking for some parts

Postby Kermit484 » Fri Jun 15, 2012 8:23 am

I have a carb and intake as well that I removed for an EFI swap. It was on the rig when we bought; I can't remember specs of it shrug . I can post some pics if you are interested.
'77 - efi, 302, detroit 9"rear w/4.56, D44 (locked), 35" M/TR's, Roll Cage
User avatar
Kermit484
Official CCB Member
Official CCB Member
 
Posts: 49
Joined: Wed Nov 16, 2011 7:17 pm

Re: looking for some parts

Postby HIX » Mon Jun 18, 2012 7:14 am

PMs sent.

Also looking for a wiper motor drop bracket
HIX
Official CCB Member
Official CCB Member
 
Posts: 174
Joined: Tue Feb 15, 2011 11:38 am
Location: Wheat Ridge Colorado

Re: looking for some parts

Postby HIX » Wed Jun 20, 2012 8:40 pm

Touch me in the morning and then just walk away....
HIX
Official CCB Member
Official CCB Member
 
Posts: 174
Joined: Tue Feb 15, 2011 11:38 am
Location: Wheat Ridge Colorado

Re: looking for some parts

Postby HIX » Tue Jul 03, 2012 8:16 am

Also looking for a
passenger side seat latch bracket
Wiper motor drop bracket
Center console with space for stereo
HIX
Official CCB Member
Official CCB Member
 
Posts: 174
Joined: Tue Feb 15, 2011 11:38 am
Location: Wheat Ridge Colorado

Re: looking for some parts. UPDATED

Postby Gunnibronco » Tue Jul 03, 2012 10:35 am

Seat bracket that bolts to the floor? Kinda a U shaped thing. I got one you can have.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
 
Posts: 4074
Joined: Mon Jan 03, 2011 5:07 pm
Location: Gardnerville, NV

Re: looking for some parts. UPDATED

Postby B.O.B. » Wed Jul 04, 2012 5:32 am

wish i knew you needed that bracket could have gave you mine when you were here last week.
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
B.O.B.
Official CCB Member
Official CCB Member
 
Posts: 771
Joined: Thu Nov 11, 2010 9:31 am


Return to Bronco Parts Wanted

Who is online

Users browsing this forum: No registered users and 2 guests

cron