Looking spindles, backing plates, and hubs for 3/4 ton 8 lug chevy.
I had a full setup but ended tossin out thinking I would never need them. Well now I do. Hopefully wont have scavange the junk yard again. Needs to be from dana 44
www.ColoradoClassicBroncos.com
A place for Coloradans to unite with our love of 66-77 Ford Broncos
chevy 3/4 ton spindles
9 posts
• Page 1 of 1
chevy 3/4 ton spindles
by cobshane » Mon Apr 18, 2011 1:16 pm
-
cobshane - Official CCB Member
- Posts: 516
- Images: 1
- Joined: Fri Nov 12, 2010 11:31 pm
- Location: littleton
Re: chevy 3/4 ton spindles
by akaFrankCastle » Mon Apr 18, 2011 2:47 pm
I've got your spindles and backing plates in my garage.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: chevy 3/4 ton spindles
by cobshane » Mon Apr 18, 2011 3:13 pm
akaFrankCastle wrote:I've got your spindles and backing plates in my garage.
Oh yeah thank you. What do want for them?
-
cobshane - Official CCB Member
- Posts: 516
- Images: 1
- Joined: Fri Nov 12, 2010 11:31 pm
- Location: littleton
Re: chevy 3/4 ton spindles
by akaFrankCastle » Mon Apr 18, 2011 7:07 pm
Let me just confirm, looking for the larger version of the spindles? The ones that are not typically used for the Bronco disc brake conversion?
If so, that is what I have. Pulled from a late 76/1977 K20. Wound up getting the wrong ones when doing my disc conversion a few weeks ago.
Like to get back what I paid for them, 20 each. But bottom line is I can't use them for anything and taking them back to the yard is a pain in the ass.
If so, that is what I have. Pulled from a late 76/1977 K20. Wound up getting the wrong ones when doing my disc conversion a few weeks ago.
Like to get back what I paid for them, 20 each. But bottom line is I can't use them for anything and taking them back to the yard is a pain in the ass.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: chevy 3/4 ton spindles
by cobshane » Tue Apr 19, 2011 6:18 am
akaFrankCastle wrote:Let me just confirm, looking for the larger version of the spindles? The ones that are not typically used for the Bronco disc brake conversion?
If so, that is what I have. Pulled from a late 76/1977 K20. Wound up getting the wrong ones when doing my disc conversion a few weeks ago.
Like to get back what I paid for them, 20 each. But bottom line is I can't use them for anything and taking them back to the yard is a pain in the ass.
Yeah it uses a big inner Bearing, that should be what I need.
-
cobshane - Official CCB Member
- Posts: 516
- Images: 1
- Joined: Fri Nov 12, 2010 11:31 pm
- Location: littleton
Re: chevy 3/4 ton spindles
by akaFrankCastle » Tue Apr 19, 2011 9:09 am
Well, if they turn out to be wrong, no sweat. Just let me know and I'll take them back and return them to the yard. If'n ya want em, I can possibly hand them off to anyone from up north who shows up down here this Saturday, or I can meet you in Castle Rockish and we can do the hand off.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: chevy 3/4 ton spindles
by cobshane » Tue Apr 19, 2011 4:27 pm
We will see what we can figure out. I might try to get down there. But im not holding my breath. Sure beats a unneeded trip to the junk yard. Price sounds good to me.
-
cobshane - Official CCB Member
- Posts: 516
- Images: 1
- Joined: Fri Nov 12, 2010 11:31 pm
- Location: littleton
Re: chevy 3/4 ton spindles
by akaFrankCastle » Sat Apr 30, 2011 11:28 am
Shane, I sent the spindles and backing plates north with Zilla. Should be able to pick them up from him. Sorry, wasn't going to be able to make it up to Denver this weekend.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: chevy 3/4 ton spindles
by cobshane » Sat Apr 30, 2011 3:57 pm
Works perfect. Got to pickup parts from zillacon as well.
-
cobshane - Official CCB Member
- Posts: 516
- Images: 1
- Joined: Fri Nov 12, 2010 11:31 pm
- Location: littleton
9 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 5 guests