www.ColoradoClassicBroncos.com
A place for Coloradans to unite with our love of 66-77 Ford Broncos
Core support bracket
13 posts
• Page 1 of 1
Core support bracket
by Justin » Sun Nov 29, 2015 11:25 pm
Anyone have one or two of these laying around: http://shop.broncograveyard.com/66-77-B ... fo/14008S/? I'm hoping that someone who tubed their front clip has one.
-
Justin - Official CCB Member
- Posts: 6198
- Images: 0
- Joined: Sat Oct 09, 2010 11:04 pm
- Location: Lakewood
Re: Core support bracket
by Gunnibronco » Sun Nov 29, 2015 11:47 pm
I'll look and see. My core support is still in the scrap pile at work.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
Gunnibronco - Official CCB Member
- Posts: 4074
- Joined: Mon Jan 03, 2011 5:07 pm
- Location: Gardnerville, NV
Re: Core support bracket
by Justin » Sun Nov 29, 2015 11:51 pm
If they're still there all 3 would be appreciated. I need at least one for a second battery on the drivers side. The vertical parts are what I need.
Sent from my SM-N920V using Tapatalk
Sent from my SM-N920V using Tapatalk
-
Justin - Official CCB Member
- Posts: 6198
- Images: 0
- Joined: Sat Oct 09, 2010 11:04 pm
- Location: Lakewood
Re: Core support bracket
by akaFrankCastle » Mon Nov 30, 2015 6:27 am
The Project X tub will soon be headed to the recyclers. I can cut these off before it goes.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: Core support bracket
by landshark » Mon Nov 30, 2015 8:57 am
How is the core support on project x? if its not too much trouble i would love to have a section of it from the center to the driver side, i will need a section in there to patch a rot area on mine eventually.
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
-
landshark - Official CCB Member
- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
- Location: Denver, Wash Park Area
Re: Core support bracket
by Justin » Mon Nov 30, 2015 9:18 am
akaFrankCastle wrote:The Project X tub will soon be headed to the recyclers. I can cut these off before it goes.
That would be awesome, thanks! I think I'm going to Pueblo on Friday if that works.
-
Justin - Official CCB Member
- Posts: 6198
- Images: 0
- Joined: Sat Oct 09, 2010 11:04 pm
- Location: Lakewood
Re: Core support bracket
by Gunnibronco » Mon Nov 30, 2015 11:58 am
Mine are hammered sh*t. You don't want them.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." – Claire Wolfe
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, TGW HP1060 and HP1014 axles, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, York OBA, 4x4x2, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
Gunnibronco - Official CCB Member
- Posts: 4074
- Joined: Mon Jan 03, 2011 5:07 pm
- Location: Gardnerville, NV
Re: Core support bracket
by akaFrankCastle » Mon Nov 30, 2015 2:37 pm
landshark wrote:How is the core support on project x? if its not too much trouble i would love to have a section of it from the center to the driver side, i will need a section in there to patch a rot area on mine eventually.
Will let you know. I plan to offer it up for chopping and vulturing once I get it back north.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: Core support bracket
by akaFrankCastle » Mon Nov 30, 2015 2:38 pm
Justin wrote:akaFrankCastle wrote:The Project X tub will soon be headed to the recyclers. I can cut these off before it goes.
That would be awesome, thanks! I think I'm going to Pueblo on Friday if that works.
It doesn't work. X is still in Penrose and I'm thinking Saturday, at the earliest, before I pick it up. Will let you know what plays out.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: Core support bracket
by plumbdoctor » Mon Nov 30, 2015 7:39 pm
Chris, I have a half section here already cut if you want it....justin, I have some of the verticals here, and Zack, if the whole core support is good I would like it, also need inner wheel wells if they are good....lets talk swap
Your sh!* is my bread and butter!
-
plumbdoctor - Official CCB Member
- Posts: 568
- Images: 0
- Joined: Tue Oct 05, 2010 9:17 pm
- Location: Golden
Re: Core support bracket
by Justin » Mon Nov 30, 2015 7:40 pm
Sweet, thanks!
Sent from my SM-N920V using Tapatalk
Sent from my SM-N920V using Tapatalk
-
Justin - Official CCB Member
- Posts: 6198
- Images: 0
- Joined: Sat Oct 09, 2010 11:04 pm
- Location: Lakewood
Re: Core support bracket
by akaFrankCastle » Mon Nov 30, 2015 9:03 pm
plumbdoctor wrote:Chris, I have a half section here already cut if you want it....justin, I have some of the verticals here, and Zack, if the whole core support is good I would like it, also need inner wheel wells if they are good....lets talk swap
I'm gonna go out on a limb and say you won't be interested in any of that stuff from this tub. At best, I think you could pull pieces and parts. But as far as whole pieces go, not so much.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle - Official CCB Member
- Posts: 4901
- Images: 0
- Joined: Wed Oct 27, 2010 5:25 pm
- Location: Colorado Springs
Re: Core support bracket
by landshark » Mon Nov 30, 2015 11:20 pm
Great thanks.
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
-
landshark - Official CCB Member
- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
- Location: Denver, Wash Park Area
13 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 3 guests