Looking for Denver Shop or Tuning Help

Post Reply
User avatar
jjacobs05
Official CCB Member
Official CCB Member
Posts: 14
Joined: Mon Apr 06, 2015 1:24 pm

Looking for Denver Shop or Tuning Help

Post by jjacobs05 »

Hi all,

I was wondering if anyone has a good Bronco shop in the Denver or Golden area? Or is anyone out there looking to provide some much needed help to get my Bronco back to purring? A buddy of mine rebuilt the engine about 4 years ago and things were running smoothly for quite a while. He has since moved away and I am without a shop that I trust. Since I don't have a garage, the time, or really the knowledge to tune it back up to how it was running back then, I thought I would ask the crew here to get recommendations.

I suspect that my immediate issues could be solved with some minor tuning or perhaps a new fuel pump, but I would defer to a more knowledgeable person to diagnose it. Currently the Bronco is in Golden and would have to be towed somewhere to be looked at.

Thanks!
Jay
User avatar
mickphatmac
Official CCB Member
Official CCB Member
Posts: 1810
Joined: Fri Mar 16, 2012 9:26 am

Re: Looking for Denver Shop or Tuning Help

Post by mickphatmac »

Are you getting fuel up to the carb? Have you messed with the points and timing yet or do you just want someone to take care of it for you?
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
User avatar
jjacobs05
Official CCB Member
Official CCB Member
Posts: 14
Joined: Mon Apr 06, 2015 1:24 pm

Re: Looking for Denver Shop or Tuning Help

Post by jjacobs05 »

It is pretty strange in that it seems to be an intermittent issue. It runs completely fine for maybe 10 minutes, and then will stall out (once while I was going 60 mph). After I pull over, it will just barely start and with the gas pedal fully down will not rev up at all for about 5 minutes (sounds like I'm in a slow-putt competition). If I let off the gas pedal at all, it will die and I will hear a loud backfire out the exhaust. After about 5 minutes, it will rev up fine again and I can get another 10 miles down the road.

I have messed with the points and timing years ago, but don't really trust myself to do a good job. I would love some help or recommendations on where to go.
User avatar
Eck
Official CCB Member
Official CCB Member
Posts: 2462
Joined: Thu Oct 25, 2012 8:33 pm

Re: Looking for Denver Shop or Tuning Help

Post by Eck »

Dusty Dog Garage is a Bronco guy and is part of this club. I am not sure what his expertise or experience is with carbs, but give him a call.
http://dustydoggarage.com/

Jason's Auto Repair in Arvada is another club member and shop owner that comes highly recommended-- again, not sure about carb expertise but probably worth a call.
Address: 6439 Miller St, Arvada, CO 80004
Phone: (720) 787-4695
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
jjacobs05
Official CCB Member
Official CCB Member
Posts: 14
Joined: Mon Apr 06, 2015 1:24 pm

Re: Looking for Denver Shop or Tuning Help

Post by jjacobs05 »

Thanks Eck - The recommendations are much appreciated. I will check them out.
User avatar
mickphatmac
Official CCB Member
Official CCB Member
Posts: 1810
Joined: Fri Mar 16, 2012 9:26 am

Re: Looking for Denver Shop or Tuning Help

Post by mickphatmac »

on FB there's a guy I believe close to your neck of the woods, Andy Janes. Specializing in Broncos and classic cars...
Shop # is 720-681-8105
You do not have the required permissions to view the files attached to this post.
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: Looking for Denver Shop or Tuning Help

Post by Rox Crusher »

I would replace the fuel filter.
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
jjacobs05
Official CCB Member
Official CCB Member
Posts: 14
Joined: Mon Apr 06, 2015 1:24 pm

Re: Looking for Denver Shop or Tuning Help

Post by jjacobs05 »

Thanks mickphatmac, I will also look into Andy Janes' shop.

And thanks Rox Crusher, I will check the fuel filter.
User avatar
mickphatmac
Official CCB Member
Official CCB Member
Posts: 1810
Joined: Fri Mar 16, 2012 9:26 am

Re: Looking for Denver Shop or Tuning Help

Post by mickphatmac »

Mine was doing the same thing a couple years ago and the timing was out about 20┬░ so I will check the points and throw a timing light on it and I bet that fixes your problem
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
User avatar
jjacobs05
Official CCB Member
Official CCB Member
Posts: 14
Joined: Mon Apr 06, 2015 1:24 pm

Re: Looking for Denver Shop or Tuning Help

Post by jjacobs05 »

Thanks mickphatmac. Sorry to hear that you also had this issue, but that's great to know.
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: Looking for Denver Shop or Tuning Help

Post by Justin »

I've got a timing light. If you want to swing by I'd be happy to check it.
User avatar
jjacobs05
Official CCB Member
Official CCB Member
Posts: 14
Joined: Mon Apr 06, 2015 1:24 pm

Re: Looking for Denver Shop or Tuning Help

Post by jjacobs05 »

Thanks Justin,

I sent you a personal message. Would be awesome to get some knowledgeable help!
Post Reply