Looking for a Dana 44 front axle. Planning a 3.5SL 1BL. Would you recommend a high pinion?
Title was a typo...70 bronco and not sure how to edit the title!
Sent from my iPhone using Tapatalk
Dana 44 for 73 bronco
-
Bobby73
- Official CCB Member
- Posts: 18
- Joined: Thu Apr 24, 2014 10:58 am
Dana 44 for 73 bronco
Last edited by Bobby73 on Sun May 09, 2021 7:24 am, edited 1 time in total.
-
Gunnibronco
- Official CCB Member
- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: Dana 44 for 73 bronco
Your 73 should have come with a D44.
High pinion D44 will all be full width, and you'll either need a matching rear or to cut down the front to EB width. If you cut one down you'll want a 76/77 front. The 78/79 is harder to adjust.
I don't think the HP is necessary with the 3.5SL. Full width is nice and the HP does make the pinion angle better than LP.
High pinion D44 will all be full width, and you'll either need a matching rear or to cut down the front to EB width. If you cut one down you'll want a 76/77 front. The 78/79 is harder to adjust.
I don't think the HP is necessary with the 3.5SL. Full width is nice and the HP does make the pinion angle better than LP.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
Bobby73
- Official CCB Member
- Posts: 18
- Joined: Thu Apr 24, 2014 10:58 am
Re: Dana 44 for 73 bronco
Oops typo...for a 70
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk