gonna install a 3g alternator after work...again

Post Reply
User avatar
Brianut
Official CCB Member
Official CCB Member
Posts: 350
Joined: Thu Oct 14, 2010 6:06 am

gonna install a 3g alternator after work...again

Post by Brianut »

Last night I fixed my loose wires and installed new quick release battery clamps. (thanks Kirk they kick major donkey)
more likely to remove them when doing anything electrical in the future as it is so easy.
Anyhowput my 8 volt battery on the charger last night and this morning before work gave it a quick try.
no bueno.

rant the main reason I bought the $150 non JY 3g is so I wouldn't have to much worry about it being bad as it should be good, after all it is a reman.
It worked when new but failed with in about a month.
i guess the good part is that it has a lifetime warranty.
Swung by AutoZone had them test it. yep bad, gave em my phone number, signed the pad printed exchange receipt and out the door.

Kind of a pain but I guess had this been a JY unit I would have been out that money and time, where as this way it was just some time.
JY one probably wouldnt have failed but oh well, at least now I have new cables with QD's on them and should have a charging truck by nightfall.

Thanks again to those on the China Wall run who patiently waited and helped with my issues.
Hopefully somebody else can be "that guy" next time. icon biggin
Viperwolf1

Re: gonna install a 3g alternator after work...again

Post by Viperwolf1 »

The intermittent loose cable was probably the cause of the alt failure. A JY alt would have failed too.
User avatar
Brianut
Official CCB Member
Official CCB Member
Posts: 350
Joined: Thu Oct 14, 2010 6:06 am

Re: gonna install a 3g alternator after work...again

Post by Brianut »

good point,hadn't thought of it that way.
Guessing it might be a good idea to make sure to double check the next day when i do late night work in the garage.
Might have caught that.
I know for sure the new cables are tight though, don't want that to happen again.
Good reason to never camp or wheel alone if you can help it.
I woulda been up a stinky creek minus the paddle had i been alone.
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: gonna install a 3g alternator after work...again

Post by akaFrankCastle »

Brianut wrote:good point,hadn't thought of it that way.
Guessing it might be a good idea to make sure to double check the next day when i do late night work in the garage.


2nd that. Imagine my surprise when I showed up to work a few weeks ago and saw one of my old spark plug wires dangling from the PS side of the hood. Forgot to do a thorough double check before I buttoned everything up for the night.


Brianut wrote: I woulda been up a stinky creek minus the paddle had i been alone.


Zilla can set me straight on this, but IRCC "abandoning" your rig in public land is not a good thing. I think I heard mention of permits being required to retrieve it and a story of an F350 that has been out there for a few years.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Brianut
Official CCB Member
Official CCB Member
Posts: 350
Joined: Thu Oct 14, 2010 6:06 am

Re: gonna install a 3g alternator after work...again

Post by Brianut »

it would take dire circumstances for me to have to walk out and leave a vehicle behind.
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: gonna install a 3g alternator after work...again

Post by akaFrankCastle »

Brianut wrote:it would take dire circumstances for me to have to walk out and leave a vehicle behind.


x2. In Alaska I got in to a few hairy spot while out mudding in my F150. My buddy's Yota didn't have the gumption to get me out so a few hours of chopping logs and shoveling slop was required. Definitely didn't want my truck to wind up as target practice for every yokel with a piece, which is what often happens to abandoned vehicles. If the tweakers don't simply set them on fire.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
Post Reply