New upholstery in patina survivor?

Post Reply
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

New upholstery in patina survivor?

Post by Gunnibronco »

Looking for feedback.

I've been offered to make a swap. A company wants to use my Explorer Sport seats as a sample to recreate the fabric. Unfortunately this would mean destroying my existing seat covers.

I'm trying to work a deal for a complete set of new covers to replace the covers I'd send them for samples.

It's not a done deal, and I'm not even sure I should take it if offered.

The truck is 1 of 141 Candyapple Red 72 Explorer Sports. It is still original paint and mostly original, with a few "period correct" upgrades.

My current plan will be to make rust repairs (floors, cowl, door pillars, and rockers), possibly clear over the patina or just restore original paint as best as possible. I will replace the old Superlift with 3.5" WH lift parts I have. I also have power brakes, disk brakes, power steering ready as upgrades but will keep all original parts if it needs to be put back to original. Outside of these changes I plan to keep it as is, a patina survivor.

The seat covers are the worst part of the truck. Would new upholstery look weird in an otherwise unrestored interior?

Should I keep the original seat covers or go with new upholstery if offered?

20160524_174226.jpg


DSCN7814.JPG
You do not have the required permissions to view the files attached to this post.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Eck
Official CCB Member
Official CCB Member
Posts: 2462
Joined: Thu Oct 25, 2012 8:33 pm

Re: New upholstery in patina survivor?

Post by Eck »

I donΓÇÖt think that color would look out of place new/restored. ItΓÇÖs not like itΓÇÖll be bright blue or green replacements of faded blue/green. I donΓÇÖt think torn up vinyl adds to the value- especially since you are repairing other parts. ItΓÇÖs already not 100% original.


Sent from my iPhone using Tapatalk
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: New upholstery in patina survivor?

Post by Gunnibronco »

If they will give me a set of complete covers for my sample (and I offered a blue Ranger seat cover) I'll probably do it.

I posted this on CB.com and someone mentioned that my vinyl can probably be repaired. The split vinyl is the only reason I really feel the need to replace it. So if it can be repaired to a decent point I'll be happy.

The more I think about it, the idea of a crusty patina truck appeals to me. I'm even starting to like the basement rec room carpet. There is really so much work that would need to be done just to make the interior really nice. The door panels and seat belts are very worn, the dash is cut (I don't want to paint the dash because there are paint inspection stamps still visible), steering wheel is wasted, dash pad is trash (I have a new dash pad though), wiper motor cover and sun visors are missing (I do have replacements that match the condition of the interior). I kept this rig instead of my 66 specifically because a patina truck wouldn't need as much work as the resto needed for the 66, and that is playing a big part in my decision. I can't seem to reel myself in on projects (have you seen the trouble I get into with my 74?) and don't really want to get into another huge time suck project. I have a 39 Plymouth if I ever want to get into another 10 year project.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: New upholstery in patina survivor?

Post by Rox Crusher »

rabbit hole, speaking from experience
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: New upholstery in patina survivor?

Post by Gunnibronco »

Rox Crusher wrote:rabbit hole, speaking from experience


Yeah there is no right answer.

I never heard back from Freewheelin Broncos. So the option of swapping samples for finished upholstery isn't on the table.

I think I'm going to look into getting the split vinyl repaired and leaving everything as-is. I'm definitely NOT planning to restore the body and paint, so leaving the interior alone seems to make the most sense.

I did already buy a new dash pad, the old one is a disaster. I really feel like fixing one thing will lead down that rabbit hole and end up with everything replaced. Or possibly a weird looking interior of mismatched new and old parts.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
BroncoRaider
Official CCB Member
Official CCB Member
Posts: 536
Joined: Thu Oct 22, 2015 10:47 am

Re: New upholstery in patina survivor?

Post by BroncoRaider »

I love that carpet as much as Rox loves the patina on mine. Leaving it as is sounds like a good plan.
ΓÇ£BuddyΓÇ¥ - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: New upholstery in patina survivor?

Post by Gunnibronco »

BroncoRaider wrote:I love that carpet as much as Rox loves the patina on mine. Leaving it as is sounds like a good plan.


Thanks.

I was planning to send you the old carpet, I remember you asking for it. That was when I was planning a full restoration. With the new "patina" plan, I'm afraid it fits in perfectly. Sorry I'm reneging on that promise. I hope you can forgive me.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
BroncoRaider
Official CCB Member
Official CCB Member
Posts: 536
Joined: Thu Oct 22, 2015 10:47 am

Re: New upholstery in patina survivor?

Post by BroncoRaider »

Not a problem. We always discussed ΓÇ£if and when.ΓÇ¥ No reneging if youΓÇÖre keeping it.
ΓÇ£BuddyΓÇ¥ - 1975 Bronco Sport, 302/Viperbuilt 4R70W/D20, Explorer EFI, More Patina than Paint...
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: New upholstery in patina survivor?

Post by Gunnibronco »

BroncoRaider wrote:Not a problem. We always discussed ΓÇ£if and when.ΓÇ¥ No reneging if youΓÇÖre keeping it.


Thank you for your understanding. LOL icon biggin
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
Post Reply