Breakfast with Broncos- Colorado Springs, 23 April 2011

A place to coordinate Meet and Greets, Trail Runs, BBQs, etc. Please move your event to the Trip Reports forum once complete, or as a Moderator to do so.
Post Reply
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by akaFrankCastle »

A cold overcast day started out with a few people arriving this morning. By 830, we were up to 22 people and 12 Broncos in total. Our furthest traveler today from the South was ManTruck, making the drive up from Canon CIty. And from the North, BNC04 popped in from Longmont. We flatter ourselves and say Brett showed up for our Broncos, but I think the parts he was picking up were a pretty big attraction too.

From left to right: akaFrankCastle, ManTruck, DavidSmith
Image

Vragor, Dalli, and 71Broncoman's 1975 Highboy
Image

Can't remember name (I'm horrible with names!), Sbolt19, and SevenT (hidden behind the tirekickers)
Image

Jesus_Man, Eric (not on the board), Landon (not on the board YET), and Colorado75Bronc
Image

Not pictured: Steve

Omelette Parlor was packed but they were very accommodating to our large party. That being said, if we do this again I heard suggestions of Western Omelette on Colorado Ave.

Great turn out today, and big apologies for all the time spent in the cold!!!
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Entourage
Official CCB Member
Official CCB Member
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by Entourage »

Looks like a great time and a great turn out. Thanks for posting up the pics too.
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
BNC04
Official CCB Member
Official CCB Member
Posts: 350
Joined: Thu Jan 27, 2011 12:01 pm

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by BNC04 »

What an awesome day!!! I woke up at 5:00 am to about 1.5 inches of snow here in Longmont. Pointed the truck south and landed in Aurora to pick up a set of doors, Craig, thanks for taking the time off work to chat a bit and load up the doors, I got a heck of a deal on some very nice doors!!!! .. Ahead of schedule, I called my next appointment (Don) and said, ΓÇ£hey lets just meet up at the breakfastΓÇ¥. Plugged the address into the GPS and away I went to the springs to add some northern charm to the breakfast.

I got there about 8:45 and saw all the bronco's in the lot and walked up to the doors, the place looked packed and a few members were outside braving the cold, waiting for a table and chatting about Bronco's. We all got seated and had some good conversation. I met some really nice people who names will forever escape my memory and had a great time eyeballing all the bronco's and getting some ideas for the future.

It was a little chilly and spitting snow so off I went to my next appointment,, to meet Don at his yard. HOLY CRAP!!! The man has some broncoΓÇÖs! We spent about 45 mins chatting and looking at all the stuff he had. The project in his shed is nothing short of amazing! Don sold me some e brake parts that I needed and was a wealth of information and a great guy to just talk to. IΓÇÖm looking forward to meeting with him again.

Leaving DonΓÇÖs and since I was in the area, I called Bronco Hut and spoke with Dana who gave me directions to the shop. Finding it, We got to talk a bit while he as doing a disc conversion for a customer and I walked away with a rear quarter panel I needed. Had to go to the house to pay and chatted with Melissa for about 20 mins and then headed back North.

Got home, decided to return the wrong parts that NAPA gave me for the rear axle bearings and picked up some spark plugs. Installed them and the shift bushings for the Hurst 3 speed in the bronco, and went for a shakedown cruise.

Going great until a heater hose burst, but I was close enough to nurse it back home and get it in the stable to rest for the night until I can replace that tomorrow,

Now to hide the Easter eggs,, A full day for sure!
75 D44/ARB/Disc PS. 86 5.0 Carbed- NP-435 yukon rear. 4.11 3.5 Susp lift Rampage top
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by Rox Crusher »

Looks like you guys had a great turn out......I would have attended but was busy wrenching.

Zach, yours looks like it's coming along nicely.

Mantruck, I can't wait to see yours in person. Half cabs are so cool but I think it is harder to get the overall package just right like you have.
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
71 Broncman
Official CCB Member
Official CCB Member
Posts: 132
Joined: Sun Nov 21, 2010 9:09 am

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by 71 Broncman »

It was great to be able to put some faces with the names. Breakfast was good and time to talk builds as well as possible causes for handing issues 75 Co. is having . Good job Zach.
Mark.
User avatar
ManTruck
Official CCB Member
Official CCB Member
Posts: 200
Joined: Tue Oct 12, 2010 7:47 am

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by ManTruck »

Good day with friends, food and of course Broncos. Thanks for the help in getting this done.

Dave
You do not have the required permissions to view the files attached to this post.
Owned my 1972 since 1985


Canon City, Co
User avatar
ManTruck
Official CCB Member
Official CCB Member
Posts: 200
Joined: Tue Oct 12, 2010 7:47 am

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by ManTruck »

And a few more
You do not have the required permissions to view the files attached to this post.
Owned my 1972 since 1985


Canon City, Co
User avatar
ManTruck
Official CCB Member
Official CCB Member
Posts: 200
Joined: Tue Oct 12, 2010 7:47 am

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by ManTruck »

Rox Crusher wrote:Looks like you guys had a great turn out......I would have attended but was busy wrenching.

Zach, yours looks like it's coming along nicely.

Mantruck, I can't wait to see yours in person. Half cabs are so cool but I think it is harder to get the overall package just right like you have.


Rox your too kind. I guess I owe you a breakfast.

Zach does have a nice rig.
Owned my 1972 since 1985


Canon City, Co
User avatar
David Smith
Posts: 5
Joined: Wed Dec 29, 2010 11:25 am

Re: Breakfast with Broncos- Colorado Springs, 23 April 2011

Post by David Smith »

My first meet with the group! Really liked the variety of the rides and their owners. Gets me motivated for some upgrades. Looking for the next meet!!
Most important is what you learn after you thought you knew it all!

'72 Classic, fresh rebuilt 351W, Edelbrock top-end, C-6, a work in progress since '94.
Post Reply