Chassis Part Discount From Ingalls Engineering

Only Approved Vendors or Admins/Mods can post up in this Section and prices MUST be posted. All other specials need to be posted in the open Vendor section.
Post Reply
User avatar
Crazyone
Official CCB Member
Official CCB Member
Posts: 207
Joined: Tue Jan 25, 2011 8:33 am

Chassis Part Discount From Ingalls Engineering

Post by Crazyone »

OK guys, here it is. The parts listed below are available for CCB members at a substantial discount from the retail price (over 50% in most cases). Go to http://www.IngallsEng.com , add the parts numbers to the cart that you want then enter the coupon code "CCB" at the bottom of the cart page and hit checkout. The checkout page will show the discount applied. Easy. We don't currently have the original steering arms for the Broncos because of low demand but if there is enough interest, we can look at making a large order for members. I did however include the larger Chevy rod ends for those looking to upgrade. If you are interested in something I have not include, PM me and I see if we can get it added to the list. The discount is good until June 30, 2011. Good luck!

fire fire

IK8194T - Upper BJ Dana 44
IK8195T - Lower BJ Dana 44
IK8447 - Track Bar Bushings
IES2012S - Adjusment Sleeve for Tie Rod

IES2026R - Chevy Tie Rod End
IES2027L - Chevy Tie Rod End
IES2233L - Chevy Tie Rod End
IES2234R - Chevy Tie Rod End
Last edited by Crazyone on Fri May 06, 2011 9:36 am, edited 2 times in total.
You will not see me cry because I do not sing the blues
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: Chassis Part Discount From Ingalls Engineering

Post by Justin »

This is awesome. Thank you!
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: Chassis Part Discount From Ingalls Engineering

Post by akaFrankCastle »

Sweet! Good timing too. Ive been wanting to yank and rebuild my 44.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Crazyone
Official CCB Member
Official CCB Member
Posts: 207
Joined: Tue Jan 25, 2011 8:33 am

Re: Chassis Part Discount From Ingalls Engineering

Post by Crazyone »

Bump to top.
You will not see me cry because I do not sing the blues
User avatar
Entourage
Official CCB Member
Official CCB Member
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm

Re: Chassis Part Discount From Ingalls Engineering

Post by Entourage »

Any chance this can be extended into 2012?
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
Crazyone
Official CCB Member
Official CCB Member
Posts: 207
Joined: Tue Jan 25, 2011 8:33 am

Re: Chassis Part Discount From Ingalls Engineering

Post by Crazyone »

I'll check but I think that would be possible. Let me know before you order so I can confirm that the website has been updated.
You will not see me cry because I do not sing the blues
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Chassis Part Discount From Ingalls Engineering

Post by Jesus_man »

I added a TRE to my cart and entered the code. Doesn't seem to be working...
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Crazyone
Official CCB Member
Official CCB Member
Posts: 207
Joined: Tue Jan 25, 2011 8:33 am

Re: Chassis Part Discount From Ingalls Engineering

Post by Crazyone »

OK, I got it turned back on. The Code is CCB. The discount will be good through the end of May. Let me know if anyone is having any problems. The discount is good for the part numbers listed in the first post.
You will not see me cry because I do not sing the blues
User avatar
Entourage
Official CCB Member
Official CCB Member
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm

Re: Chassis Part Discount From Ingalls Engineering

Post by Entourage »

Sweeeet. Thanks for your help.

There may be a Tech Day for a Tie Rod End build so this may save a lot of money.
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
Post Reply