What not to do on a warm summer day.
- gslack
- Official CCB Member

- Posts: 68
- Joined: Sat Jan 08, 2011 2:20 am
What not to do on a warm summer day.
So you impulsively decide to take the top of your bronco on a warm summer day, sounds like a good idea right? WRONG. It may look cool, it may feel nice, BUT WRONG. Just letting you all know, not for the faint of heart...getting her off and on is a challenge..and even more challenging without breaking anything
- sbolt19
- Official CCB Member

- Posts: 740
- Joined: Wed Oct 06, 2010 9:04 am
Re: What not to do on a warm summer day.
Yeah, the real crux is the damn pegs on the to that go down in the corner posts. It wouldn't be so bad if it weren't for those buggers.
- airbur
- Official CCB Member

- Posts: 1721
- Joined: Wed Sep 29, 2010 7:39 am
Re: What not to do on a warm summer day.
Can you say.....Soft Top? :)
Completely agree......Ours had never been removed before when we took it off last year. Would have made for a good America's Funniest Home Videos skit with me bent over underneath it trying to wiggle those rear posts out and then expecting my 5'2" 103lb wife to be able to receive it on the floor....good times.
Completely agree......Ours had never been removed before when we took it off last year. Would have made for a good America's Funniest Home Videos skit with me bent over underneath it trying to wiggle those rear posts out and then expecting my 5'2" 103lb wife to be able to receive it on the floor....good times.
Sold: 1970 w/427W Injected Stroker
- ClayJ
- Official CCB Member

- Posts: 521
- Joined: Fri Oct 01, 2010 7:45 am
Re: What not to do on a warm summer day.
I've had my top off and on many many times over the years. Any time I'm going to change it, I invite 3 or 4 good friends over, get the bronco out in a flat, wide open area. I'd have some 2x4's ready to help provide leaverage. I used to have a couple cut to just the right length so I could sit one up on the inside, put a crow bar across the top, and gently pry up the corner posts then slip a short 2x4 between the top and the bronco so people's hands don't get crushed.
It used to take only about 10 minutes to take it off or put it on with some strong backs around. The part I hated the most was doing all those bolts.
We'll see how long it takes now that it's sat for 5 years.
It used to take only about 10 minutes to take it off or put it on with some strong backs around. The part I hated the most was doing all those bolts.
We'll see how long it takes now that it's sat for 5 years.
Last edited by ClayJ on Mon May 09, 2011 6:53 am, edited 1 time in total.
- hockeydad4-22
- Official CCB Member

- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
Re: What not to do on a warm summer day.
I am thinking I will build up some sort of pully system and hang it from the rafters.
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: What not to do on a warm summer day.
I built a pulley system before I took mine off the first time. Makes it easier but still somewhat of a fight doing it solo.
Mark.
Mark.
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: What not to do on a warm summer day.
Here is my setup:

Wall attachement:

If it wasn't for the roll cage, I could get this off myself. But for now, I need one or two more strong guys to help me lift it off and set it on the 2x4's.
J.D.

Wall attachement:

If it wasn't for the roll cage, I could get this off myself. But for now, I need one or two more strong guys to help me lift it off and set it on the 2x4's.
J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: What not to do on a warm summer day.
thats awesome JD!
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
-
socofn
- Official CCB Member

- Posts: 204
- Joined: Sat Apr 02, 2011 10:52 am
Re: What not to do on a warm summer day.
Pulled mine off sunday night, what a pain. Had aspirations of hanging it in the garage, but turned out placing it on a stand outside and strapping it down so the wind didn't get it. Jp
74, MONEY EATER
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: What not to do on a warm summer day.
Ours has been hanging in the garage since 93. With open rafters we turned it over and it slides right up in there like a glove. I had pics some where.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- Cortez
- Official CCB Member

- Posts: 90
- Joined: Wed Sep 29, 2010 9:01 am
Re: What not to do on a warm summer day.
my set-up is like JD's - I put four big eye-bolts in the ceiling studs and then hung 4 ratchet straps from the ceiling. I just back her into place and put the hooks on four corners and ratchet it up a couple inches then pull out. I do it alone easily.
BCO Junky - NP435, PS & PB Conversion + Hydroboost, 3.5"SL+1"BL, 35" MT's, D44 Swap, Family Cage. Saving for EFI, Seats, and Paint