Hardware
- Entourage
- Official CCB Member

- Posts: 3275
- Joined: Wed Sep 29, 2010 4:45 pm
Hardware
I need the following Hardware and wondering if you guys know what store carries theses couple of misc. items so I don't have to place another order from Wild Horses for a couple of small items.
- Hardware to hold the F-O-R-D Letters on my grill
- Hardware retainers clips to hold rear tail light assemblies
- Grade 8 Bolts for Bumpers and Roll Bar Install
Not sure if I need to goto parts store, dealership, etc. TIA
- Hardware to hold the F-O-R-D Letters on my grill
- Hardware retainers clips to hold rear tail light assemblies
- Grade 8 Bolts for Bumpers and Roll Bar Install
Not sure if I need to goto parts store, dealership, etc. TIA
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: Hardware
- Hardware to hold the F-O-R-D Letters on my grill - I have a set of the original rubber backed acorn nuts that are used to hold the letters on, I will bring them to the breakfast for the same price as the dash bars.
- Hardware retainers clips to hold rear tail light assemblies - Uhh?
- Grade 8 Bolts for Bumpers and Roll Bar Install - Any auto parts house should carry a variety of Grade 8 hardware for you.
Not sure if I need to goto parts store, dealership, etc. TIA[/quote]
- Hardware retainers clips to hold rear tail light assemblies - Uhh?
- Grade 8 Bolts for Bumpers and Roll Bar Install - Any auto parts house should carry a variety of Grade 8 hardware for you.
Not sure if I need to goto parts store, dealership, etc. TIA[/quote]
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Hardware
Rear taillight housings are held in place by the same screw that holds the lense and trim on.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- Entourage
- Official CCB Member

- Posts: 3275
- Joined: Wed Sep 29, 2010 4:45 pm
Re: Hardware
Thanks for the advice. I tried Home Depot and they had nothin' in Grade 8 - wasted trip and I am in BFE. I will check the Ace in Commerce City.
76 - You are way too nice to me. I have to buy ya breakfast.
ZOSO - There are 2 clips per tail light for a total 4 clips. I know I need clips because I have 1 of the 4 - one Little guy hung on through auto body and paint. Not sure where the heck the other 3 are
. I put everything in baggies with contents marked with a Sharpie.
76 - You are way too nice to me. I have to buy ya breakfast.
ZOSO - There are 2 clips per tail light for a total 4 clips. I know I need clips because I have 1 of the 4 - one Little guy hung on through auto body and paint. Not sure where the heck the other 3 are
. I put everything in baggies with contents marked with a Sharpie."I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: Hardware
[quote="Entourage"]Thanks for the advice. I tried Home Depot and they had nothin' in Grade 8 - wasted trip and I am in BFE. I will check the Ace in Commerce City.
76 - You are way too nice to me. I have to buy ya breakfast. Chad, you can never be too nice!
ZOSO - There are 2 clips per tail light for a total 4 clips. I know I need clips because I have 1 of the 4 - one Little guy hung on through auto body and paint. Not sure where the heck the other 3 are
. I put everything in baggies with contents marked with a Sharpie. It sounds like you are talking about a "Tinnerman nut". It is basically a piece of spring steel bent in a 180 and goes over a hole in the body sheet metal. Again, these should be available at any auto part house.
76 - You are way too nice to me. I have to buy ya breakfast. Chad, you can never be too nice!
ZOSO - There are 2 clips per tail light for a total 4 clips. I know I need clips because I have 1 of the 4 - one Little guy hung on through auto body and paint. Not sure where the heck the other 3 are
. I put everything in baggies with contents marked with a Sharpie. It sounds like you are talking about a "Tinnerman nut". It is basically a piece of spring steel bent in a 180 and goes over a hole in the body sheet metal. Again, these should be available at any auto part house.- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Hardware
Just what 76 said. I know the ace on 120th and colorado carries all this stuff.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Hardware
I don't know why, but Ace has an exceptional hardware section. The only thing I can't get there are really tiny allen head screws for hobby applications.
- Entourage
- Official CCB Member

- Posts: 3275
- Joined: Wed Sep 29, 2010 4:45 pm
Re: Hardware
SWEET! I need to get these things to keep me busy for another long weekend. 120th and Colorado is closer than the Downtown Commerce City Ace. Thanks again guys.
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Hardware
Justin wrote:I don't know why, but Ace has an exceptional hardware section. The only thing I can't get there are really tiny allen head screws for hobby applications.
I've picked up a bunch of small allen head screws from ace on 120th and colorado for my RC cars. They have a decent selection.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- hockeydad4-22
- Official CCB Member

- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
Re: Hardware
I have found that Home Depot is the worst for any kind of special hardware. THey have the basic deck screws a few bolts and nuts but that is about it. Lowes is better but still not great. Ace will vary by store. The Ace in Highlands Ranch - not so wonderful. The A&A trading post Ace on South Broadway has always had any fastner I needed. When I need to buy jsut a few - I always go there. When I need to by hundredes or thousands I go to a wholesaler
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: Hardware
O'Reilly Auto Parts has had the best selection for this type of hardware I have seen.
- Entourage
- Official CCB Member

- Posts: 3275
- Joined: Wed Sep 29, 2010 4:45 pm
Re: Hardware
I went to Ace on Kipling in Lakewood and got all the Grade 8 Hardware for Bumper and Roll Cage. Thanks guys!
76 - Which O'reilly's are you referring to?
76 - Which O'reilly's are you referring to?
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: Hardware
Entourage wrote:I went to Ace on Kipling in Lakewood and got all the Grade 8 Hardware for Bumper and Roll Cage. Thanks guys!
76 - Which O'reilly's are you referring to?
The one in Parker has been awesome for everything I have needed for my EB. Let me know if you want me to pick up some tinnerman nuts for your tail lights.
- Entourage
- Official CCB Member

- Posts: 3275
- Joined: Wed Sep 29, 2010 4:45 pm
Re: Hardware
Went to O'reilly's today and picked up a bunch of items that I assumed only WH would have but pleasantly surprised. They had Tinnerman nuts, grade 8 bolts, window cranks, headlight adjusters, etc. Going to be a fun weekend!
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix