What have you done to your Bronco today? (v.2)

Post Reply
User avatar
66and70Broncos
Official CCB Member
Official CCB Member
Posts: 111
Joined: Tue May 10, 2011 8:58 pm

Re: What have you done to your Bronco today? (v.2)

Post by 66and70Broncos »

Took 3 good friends and went for a nice ride at sunset through Garden of the Gods. Man this new bronco runs GREAT!!! Picking up my 68 Charger on Saturday but it will have to sit for a while while I work on my EB :)
Old EB 1966 I-6 170
New EB 1970 V-8 302
Next EB ? 5.0 EFI

Life is 10% what happens to you, and 90% how you react to it.
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: What have you done to your Bronco today? (v.2)

Post by hockeydad4-22 »

watered the 31's, they grew to 33's

If you look close you will note different tires but close enough for us front and rear.

I was driving down Broadway and noticed a pile of 33's that looked good at a tire store. Went in, negotiated a price ($250 for all 4 mounted and on the Bronco) said get-r-done!

4 good Micky Thompson's... sweet. Drove it 1 mile to the shop and the rt front was flat. Bad tire (split in the side wall) Went back and found 2 other good tires - now have the 33" spare too.


It'l do for now.
You do not have the required permissions to view the files attached to this post.
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
Zenzone
Official CCB Member
Official CCB Member
Posts: 304
Joined: Mon Oct 11, 2010 8:34 pm

Re: What have you done to your Bronco today? (v.2)

Post by Zenzone »

hockeydad4-22 wrote:watered the 31's, they grew to 33's

If you look close you will note different tires but close enough for us front and rear.

I was driving down Broadway and noticed a pile of 33's that looked good at a tire store. Went in, negotiated a price ($250 for all 4 mounted and on the Bronco) said get-r-done!

4 good Micky Thompson's... sweet. Drove it 1 mile to the shop and the rt front was flat. Bad tire (split in the side wall) Went back and found 2 other good tires - now have the 33" spare too.


It'l do for now.



Nice they will work great for tomorrow.
1976 Ranger Ford Bronco, 33's, 4 inch lift, Holly truck avenger 4 barrel 302, Sidewinder winch, on board air, amplified sound system, duel battery, CB radio,

Real Estate Agent at Lorin Properties Inc.
Zen@LorinProperties.com (303) 653-1541
User avatar
BNC04
Official CCB Member
Official CCB Member
Posts: 350
Joined: Thu Jan 27, 2011 12:01 pm

Re: What have you done to your Bronco today? (v.2)

Post by BNC04 »

Pulled the top off yesterday and have been just driving it a little longer and further from the nest each day. Did about 35 miles total today and had it up to 60-65 for an extended period for the first time. Need to start poking around in the front end as it felt like it wanted to start getting wobbly at those speeds. Cruised well though, Sounded good and felt even better. I still have some work to do to increase the confidence factor but I'm making progress and learning a ton. I'm just enjoying driving it really.
75 D44/ARB/Disc PS. 86 5.0 Carbed- NP-435 yukon rear. 4.11 3.5 Susp lift Rampage top
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: What have you done to your Bronco today? (v.2)

Post by Justin »

Got it dirty. fire fire
socofn
Official CCB Member
Official CCB Member
Posts: 204
Joined: Sat Apr 02, 2011 10:52 am

Re: What have you done to your Bronco today? (v.2)

Post by socofn »

Got my new shocks and steering stabilizer installed along with a new oil sending unit. Now I need to get my seat belts and I can start driving it more. Now I gotta find some 33's that aren't an arm and a leg. JP
74, MONEY EATER
Shawns Fords
Official CCB Member
Official CCB Member
Posts: 779
Joined: Sat Oct 02, 2010 6:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by Shawns Fords »

zillacon wrote:Picked up Ketchup's new 96 Exploder motor with 57K on the clock. Verified the mileage with the insurance report and it has been on their inside motor rack since 99 so I am pretty sure its the real deal. I'll crack it apart for inspection, new valve stem seals, maybe a bigger cam and hope for the best

cool deal. Do you know how to check end play in your valves? I would do that when your changing the seals. This will tell you if there is too much play and will help you determine weather to rebuild now or not. I would throw new seals on the long block as it has been sitting for so long and you can look it over good while covers are off. Just a lil FYI
User avatar
66and70Broncos
Official CCB Member
Official CCB Member
Posts: 111
Joined: Tue May 10, 2011 8:58 pm

Re: What have you done to your Bronco today? (v.2)

Post by 66and70Broncos »

took her out on I-25 for the first time and tested at higher speeds...3 spd Hurst leaves a little top end to be wanted but cruised pretty smooth at 60...better than my 66 EB with an I-6 though!
Old EB 1966 I-6 170
New EB 1970 V-8 302
Next EB ? 5.0 EFI

Life is 10% what happens to you, and 90% how you react to it.
User avatar
kchaser
Official CCB Member
Official CCB Member
Posts: 269
Joined: Sat May 07, 2011 4:54 pm

Re: What have you done to your Bronco today? (v.2)

Post by kchaser »

Pulled out the detrot locker... Inspected it... Put it back in... Yep still broken,but where?... Pulled it back out... Inspected it... Maybe I will weld it and put it back in, that'll fix it...
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by Rox Crusher »

washed 5 lbs of mud off of it

WAHOO !
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
socofn
Official CCB Member
Official CCB Member
Posts: 204
Joined: Sat Apr 02, 2011 10:52 am

Re: What have you done to your Bronco today? (v.2)

Post by socofn »

DROVE IT!!!! boardin
74, MONEY EATER
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: What have you done to your Bronco today? (v.2)

Post by hockeydad4-22 »

Rox Crusher wrote:washed 5 lbs of mud off of it

WAHOO !



Just 5 pounds --- I bet it was 70 pounds for Free Bird, Wonder why?
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: What have you done to your Bronco today? (v.2)

Post by Jesus_man »

Will put some gas in her and see what my fuel mileage was for the last 115miles +/-. Thank Zack for the phone app...I am excited to see how she does.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by Rox Crusher »

hockeydad4-22 wrote:
Rox Crusher wrote:washed 5 lbs of mud off of it

WAHOO !



Just 5 pounds --- I bet it was 70 pounds for Free Bird, Wonder why?



Because you guys were (wading?) in the deep end and I wasn't.

When I get my bumpers set up for being yanked out of mud pits I will swim in there too.
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
kchaser
Official CCB Member
Official CCB Member
Posts: 269
Joined: Sat May 07, 2011 4:54 pm

Re: What have you done to your Bronco today? (v.2)

Post by kchaser »

I unpacked these babies..... YES!!!
You do not have the required permissions to view the files attached to this post.
socofn
Official CCB Member
Official CCB Member
Posts: 204
Joined: Sat Apr 02, 2011 10:52 am

Re: What have you done to your Bronco today? (v.2)

Post by socofn »

Drove it most of the day today. Man it was HOT. I am going to have to remember to wear sunscreen. JP
74, MONEY EATER
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: What have you done to your Bronco today? (v.2)

Post by hockeydad4-22 »

kchaser wrote:I unpacked these babies..... YES!!!



Cool picture!
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
goldenboy_cp
Official CCB Member
Official CCB Member
Posts: 128
Joined: Sat Mar 05, 2011 6:18 am

Re: What have you done to your Bronco today? (v.2)

Post by goldenboy_cp »

spent 490 bucks or so got all new brakes on my bronco, did that now on to my clutch, be done by friday, then engine seals should be in and by monday off to race and 100% mechanically sound. next 2 weeks new fuse boxs and dual batt set up
TRAVIS HOYLE
User avatar
cobshane
Official CCB Member
Official CCB Member
Posts: 516
Joined: Fri Nov 12, 2010 11:31 pm

Re: What have you done to your Bronco today? (v.2)

Post by cobshane »

Opened the garage door and looked at it for awhile. Waiting for some parts.
User avatar
kchaser
Official CCB Member
Official CCB Member
Posts: 269
Joined: Sat May 07, 2011 4:54 pm

Re: What have you done to your Bronco today? (v.2)

Post by kchaser »

Got 1 tire mounted up. Others by end of week then time to start cuttin...
You do not have the required permissions to view the files attached to this post.
User avatar
Entourage
Official CCB Member
Official CCB Member
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm

Re: What have you done to your Bronco today? (v.2)

Post by Entourage »

zillacon wrote:Installed the new Kenwood.


Installed my Kenwood stereo tonight.
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
crawlercreations
Official CCB Member
Official CCB Member
Posts: 1101
Joined: Sat Nov 06, 2010 8:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by crawlercreations »

kchaser wrote:Got 1 tire mounted up. Others by end of week then time to start cuttin...


SWEET!! Is that a full fiberglass body you will be smashing into rocks?!?!
There is a fine line between "hobby" and "mental illness"
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: What have you done to your Bronco today? (v.2)

Post by Jesus_man »

kchaser wrote:Got 1 tire mounted up. Others by end of week then time to start cuttin...


I think they'll clear... bangtard
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
kchaser
Official CCB Member
Official CCB Member
Posts: 269
Joined: Sat May 07, 2011 4:54 pm

Re: What have you done to your Bronco today? (v.2)

Post by kchaser »

crawlercreations wrote:
kchaser wrote:Got 1 tire mounted up. Others by end of week then time to start cuttin...


SWEET!! Is that a full fiberglass body you will be smashing into rocks?!?!


YEP all glass, only thing metal is the windshield frame. Its 15 yrs old and has been on its side more then once. Looks kind of good in pics and from a distance, but it has been put back together many many times. Get close and it shows its age and my lack of respect for it.
User avatar
goldenboy_cp
Official CCB Member
Official CCB Member
Posts: 128
Joined: Sat Mar 05, 2011 6:18 am

Re: What have you done to your Bronco today? (v.2)

Post by goldenboy_cp »

kchaser
looks real nice what size tire and rims
TRAVIS HOYLE
User avatar
kchaser
Official CCB Member
Official CCB Member
Posts: 269
Joined: Sat May 07, 2011 4:54 pm

Re: What have you done to your Bronco today? (v.2)

Post by kchaser »

goldenboy_cp wrote:kchaser
looks real nice what size tire and rims


Tires are 42X15x17 Rims are 17X9. Got some work to do to make them fit.
Shawns Fords
Official CCB Member
Official CCB Member
Posts: 779
Joined: Sat Oct 02, 2010 6:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by Shawns Fords »

I had a visitor today whom comes in from sterling to stay here for his treatments for health issues. He has an original halfcab and talked to me for hours about mine and what needs done. I can not wait to see his Bronco. Anyway to show off mine I fired it up and let it idle for a while. I was so happy to just let it idle and listen to it run without missing a beat. As soon as I get settled in here, I can get more work done.

Put new fuel lines on the Cuda as well and cleaned the racing wheels and aired up the slicks.
User avatar
Entourage
Official CCB Member
Official CCB Member
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm

Re: What have you done to your Bronco today? (v.2)

Post by Entourage »

Zilla - that stinger looks nice smokin
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
crawlercreations
Official CCB Member
Official CCB Member
Posts: 1101
Joined: Sat Nov 06, 2010 8:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by crawlercreations »

zillacon wrote:Picked up some more parts for my EFI conversion and had CC bend me some tubing since I dont have access to a bender at work anymore and added a stinger to the front.


Looks good! Is that the tall one or the short?
There is a fine line between "hobby" and "mental illness"
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: What have you done to your Bronco today? (v.2)

Post by hockeydad4-22 »

Brakes - new pads in front. Have to order new rotors - toast!

Need to check the rears - I am fairly certian I need to replace them as well.

And I think that it is the original fluid so a complete bleed is in order as well.

(Still tons of mud packed in and around the rotors from last weekends yankie hill run - imagine that! icon biggin )
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
Post Reply