Fluid Storage containers

Get answers to Bronco-related technical issues.
Post Reply
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Fluid Storage containers

Post by Jesus_man »

As many of you do, I carry a stash of fluids with me in the bronco everywhere I go. They are all stored in an ammo can. I carry 1 gal of gear oil, 1 gal of 50/50 antifreeze a few quarts of motor oil, power steering fluid, brake fluid, etc.

My issue is that twice now, I have had the plastic jugs fail and leak inside the ammo can. And being the sealed container the can is, I don't notice until I get back in there for something. I have had one gear oil and one antifreeze bottle split on me. Are there cheap metal or at least more beefy plastic containers I can store these liquids in that would handle trail abuse? Ideally, they would be about the same size of the original containers so that they will still fit nicely in my ammo can. Filling my spare electrical components with oil or antifreeze can't be good on them and can make them useless as spares.

Any ideas?

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
Viperwolf1

Re: Fluid Storage containers

Post by Viperwolf1 »

I've seen some tupperware-like kitchen containers that work well. Rummage through the cupboards and see what you can find.
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

You tryin' to get me killed? LOL
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
rtreads
Official CCB Member
Official CCB Member
Posts: 320
Joined: Sun Jan 02, 2011 8:37 pm

Re: Fluid Storage containers

Post by rtreads »

I use old rectangular juice bottles. They wedge between the cage and the inside of the rear quarter really well!
User avatar
69bronco
Official CCB Member
Official CCB Member
Posts: 20
Joined: Sat Dec 25, 2010 11:26 pm

Re: Fluid Storage containers

Post by 69bronco »

Get ya some foam or the like to jam in the can and take up the extra space so they don't move around.
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

rtreads, you have a picture of what you are talking about?

69Bronco - That is something to try as well. If even to simply cushion them a bit. Will have to be somewhat dense as those bottle are fairly heavy for the footprint they have.

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: Fluid Storage containers

Post by Rox Crusher »

The best fluid container can be had at Costco.

Get the twin pac gallon sized apple juice.

It is a really thick see through bottle with a built in handle and a nice threaded cap.

I haven't found a better one yet.
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

I like apple juice!! LOL! I think I know what you're talking about. Do they seal well after opened? IIRC they seem to have a similar footprint to the gallon oil jugs too, allowing them to fit in my ammo can.

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: Fluid Storage containers

Post by Rox Crusher »

Jesus_man wrote:I like apple juice!! LOL! I think I know what you're talking about. Do they seal well after opened? IIRC they seem to have a similar footprint to the gallon oil jugs too, allowing them to fit in my ammo can.

J.D.


They do seal up well and the cap is sturdy enough to last a long time.

IIRC they are a little more square at the base then they are rectangular (like the anti-freeze bottles).
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

This is what I am trying to replace:
Image

Both antifreeze and oil are the same bottle.

Also carry and empty one of these to get the oil into the diffs:
Image
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

This?
Image
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
Viperwolf1

Re: Fluid Storage containers

Post by Viperwolf1 »

Rox Crusher wrote:The best fluid container can be had at Costco.

Get the twin pac gallon sized apple juice.

It is a really thick see through bottle with a built in handle and a nice threaded cap.

I haven't found a better one yet.


I use those to make ice in. A few of those in a cooler will last for days.
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: Fluid Storage containers

Post by Rox Crusher »

Jesus_man wrote:This?
Image


That's them
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

Viperwolf1 wrote:I use those to make ice in. A few of those in a cooler will last for days.


I do the same. Keeps food cold and dry, unlike ice and cheaper than Dry ice. Then I have a beer cooler with loads of ice.

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
rtreads
Official CCB Member
Official CCB Member
Posts: 320
Joined: Sun Jan 02, 2011 8:37 pm

Re: Fluid Storage containers

Post by rtreads »

This is what I use. It's big enough to carry more than a quart, but not too big to store. I jam it between the cage and the inner quarter panel. Behind the seat, or in the quarter behind the wheel well.



....ok so I need to learn how to upload photos from my iPhone...
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: Fluid Storage containers

Post by Gunnibronco »

Just saw 1+ gal plastic gas cans at Wal Mart for $6.50 each. Squat, squareish w/ spout.

Just a thought.

Chad
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

Gunnibronco wrote:Just saw 1+ gal plastic gas cans at Wal Mart for $6.50 each. Squat, squareish w/ spout.

Just a thought.

Chad


Will take a look. In camping?
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: Fluid Storage containers

Post by Gunnibronco »

In the auto department.

Chad
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
Shawns Fords
Official CCB Member
Official CCB Member
Posts: 779
Joined: Sat Oct 02, 2010 6:36 pm

Re: Fluid Storage containers

Post by Shawns Fords »

I wonder how hard it would be to seal the ammo can with something like POR15's floor pan kit? maybe you could eliminate the jug if the can was sealed up and you just filled the ammo cans with the fluids? one for gear, one for engine, one for trans etc etc etc...

I guess it would depend on how your ammo can's lid opens. Need a good seal around the lid of course, but if it is sealed to not leak then you wouldnt need the jug.
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Fluid Storage containers

Post by Jesus_man »

It's sealed now. I never know I have a leak until I go digging in it. I wouldn't be opposed to filling the cans with the liquids, but they would have to be much smaller than the one I have so as not to take up all the storage room in the bed of the bronco. I'd prefer to use some sort of jug for ease of pouring tho.

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
Post Reply