What have you done to your Bronco today? (v.2)

Post Reply
Viperwolf1

Re: What have you done to your Bronco today? (v.2)

Post by Viperwolf1 »

Item Brand Part #
A9L equivalent computer (manual trans) Ford F3ZF-12A650-DB
Standard EM073
Cardone 78-4352

A9P equivalent computer (auto trans) Ford F3ZF-12A650-FB
Standard EM680
Cardone 78-5895
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: What have you done to your Bronco today? (v.2)

Post by Gunnibronco »

Thanks Viperwolf, that is just what I was wondering.

I grabbed a SD computer at the junk yard, my Carquest said they will take it as a core. So my total cost for a rebuilt one will be about $100.00 (I get our dealership's price discount). That is the route I was going to take. Who make aftermarket CPUs?

Chad
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
ClayJ
Official CCB Member
Official CCB Member
Posts: 521
Joined: Fri Oct 01, 2010 7:45 am

Re: What have you done to your Bronco today? (v.2)

Post by ClayJ »

I put the hard top back on. Driving my grand daughter to school in the mornings was getting a bit too cold.
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Re: What have you done to your Bronco today? (v.2)

Post by airbur »

Finished DVD # 3 of the engine building series. I'm a pro now;)
Sold: 1970 w/427W Injected Stroker
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: What have you done to your Bronco today? (v.2)

Post by Justin »

Swapped the correct speedo gear onto the speedometer cable. No more doing math in my head!
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Re: What have you done to your Bronco today? (v.2)

Post by airbur »

Is it sad when a new set of ARP head bolts arrives in the mail and I get excited? My wife rolled her eyes:)
Sold: 1970 w/427W Injected Stroker
User avatar
Boulderbronc
Official CCB Member
Official CCB Member
Posts: 40
Joined: Thu Dec 23, 2010 10:28 pm

Re: What have you done to your Bronco today? (v.2)

Post by Boulderbronc »

Took a sander to the body, polished 1 rim and called it a day!
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Re: What have you done to your Bronco today? (v.2)

Post by airbur »

Boulderbronc wrote:Took a sander to the body, polished 1 rim and called it a day!


That is ONE nice looking rim!!;)
Sold: 1970 w/427W Injected Stroker
User avatar
Rox Crusher
Official CCB Member
Official CCB Member
Posts: 3980
Joined: Sun Oct 10, 2010 4:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by Rox Crusher »

Got a couple small "character marks" on the left rear quarter and a whole lot of fun too
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: What have you done to your Bronco today? (v.2)

Post by Gunnibronco »

Lots of love taps to the rear bumper, several diff shots, and my steering is off center now. Yes, sweeeeeeeet day yesterday!
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
crawlercreations
Official CCB Member
Official CCB Member
Posts: 1101
Joined: Sat Nov 06, 2010 8:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by crawlercreations »

Lost about a gallon of capacity in my gas tank.....and had an AWESOME time doing it fire fire
Last edited by crawlercreations on Sun Oct 02, 2011 1:52 pm, edited 1 time in total.
There is a fine line between "hobby" and "mental illness"
Viperwolf1

Re: What have you done to your Bronco today? (v.2)

Post by Viperwolf1 »

My tierod came out of the trail ride straighter than it was when it went into it.
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: What have you done to your Bronco today? (v.2)

Post by Gunnibronco »

Viperwolf1 wrote:My tierod came out of the trail ride straighter than it was when it went into it.


laughing2 I watched you hit it several times on the last big obstacle. Then a somewhat large rock rolled into it, just for good measure. I thought for sure your tie rod was a gonner.

Chad
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
Booger
Official CCB Member
Official CCB Member
Posts: 809
Joined: Thu Dec 23, 2010 5:55 pm

Re: What have you done to your Bronco today? (v.2)

Post by Booger »

Got a new zinger in the chrome trim on the tailgate from the HiLift retaining wingnut on spare tire carrier (thanks to the waterfall). Got some rock rash on the drivers lower door hinge, several new zingers in the bumpers and both diffs too. Had fun doing all of it too. Oh and a noisy transmission pump when standing the Bronco up at a 30+ degree angle. Seems they protest when low on fluid. Go figure, just when it quits leaking too.
Bob - Turning hydrocarbons into noise since 1970

Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
User avatar
Booger
Official CCB Member
Official CCB Member
Posts: 809
Joined: Thu Dec 23, 2010 5:55 pm

Re: What have you done to your Bronco today? (v.2)

Post by Booger »

Gunnibronco wrote:
Viperwolf1 wrote:My tierod came out of the trail ride straighter than it was when it went into it.


laughing2 I watched you hit it several times on the last big obstacle. Then a somewhat large rock rolled into it, just for good measure. I thought for sure your tie rod was a gonner.

Chad

Yea we could see that rolling rock coming couldn't we.
Bob - Turning hydrocarbons into noise since 1970

Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
Viperwolf1

Re: What have you done to your Bronco today? (v.2)

Post by Viperwolf1 »

Booger wrote:
Gunnibronco wrote:
Viperwolf1 wrote:My tierod came out of the trail ride straighter than it was when it went into it.


laughing2 I watched you hit it several times on the last big obstacle. Then a somewhat large rock rolled into it, just for good measure. I thought for sure your tie rod was a gonner.

Chad

Yea we could see that rolling rock coming couldn't we.


I couldn't see the rock but I did see everyone's eyes following it.
User avatar
rdanford
Official CCB Member
Official CCB Member
Posts: 169
Joined: Wed Sep 29, 2010 7:12 pm

Re: What have you done to your Bronco today? (v.2)

Post by rdanford »

New EFI motor is running...final tuning today

Also UPS showed up, 3 big boxes from Wild Horse are sitting in my garage!
Royce
1977 Bronco...EFI, ViperBuilt C4, PS, PB, cut with 33's - Rebuild coming
1987 Porsche 951...LS1 swap - SOLD
2006 4Runner V8 Sport Edition
1998 4Runner...DD with 333k and counting
User avatar
Entourage
Official CCB Member
Official CCB Member
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm

Re: What have you done to your Bronco today? (v.2)

Post by Entourage »

rdanford wrote:3 big boxes from Wild Horse are sitting in my garage!


I love getting boxes from Wild Horse smokin
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Re: What have you done to your Bronco today? (v.2)

Post by airbur »

Bolted up the block to the stand mount.....just need a neighbor to help me huff it on there now. Next paint.
You do not have the required permissions to view the files attached to this post.
Sold: 1970 w/427W Injected Stroker
User avatar
ZOSO
Moderator
Moderator
Posts: 3910
Joined: Mon Nov 15, 2010 4:58 pm

Re: What have you done to your Bronco today? (v.2)

Post by ZOSO »

Not the bronco but since I was actually home before dark I tore into the ferd to put in the new glow plugs. Got the driver side tore down and ready. Just need to un screw the plugs and put the new ones in. Not bad for 20 minutes of work.

Image
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: What have you done to your Bronco today? (v.2)

Post by Justin »

Spent about 7 hours today discovering how much easier the Ford 9" is to disassemble than to swap out the rear diff on the Subaru.
User avatar
ZOSO
Moderator
Moderator
Posts: 3910
Joined: Mon Nov 15, 2010 4:58 pm

Re: What have you done to your Bronco today? (v.2)

Post by ZOSO »

Got all 8 glow plugs changed today. Also put in my new stancor GPR. But I did find something interesting. I didnt need to put in new glow plugs. The plug on the driver side under the valve cover was about to fall off. Once I noticed that the glow plugs ohm'd out within spec. But I changed them anyways.
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: What have you done to your Bronco today? (v.2)

Post by Gunnibronco »

Mounted my gun rack. I'm ready to go Saturday.
P1000142.JPG

P1000141.JPG

Yeah, my roof is a mess, I had to reweld the bows to the roof skin. The big black thing is a q-pad to help quiet the top, it really "tin canned" on me after I welded the skin to the bows. But it was worth it, the skin banging on the bows was terrible. I'll cover it all up someday, yeah someday.

Chad
You do not have the required permissions to view the files attached to this post.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Re: What have you done to your Bronco today? (v.2)

Post by airbur »

Nothing, unfortunately. Although I did tool around with my son and his toddler seat strapped into the front passenger seat. Anyone else get looks from others....like they can't even believe that is legal?
Sold: 1970 w/427W Injected Stroker
User avatar
ZOSO
Moderator
Moderator
Posts: 3910
Joined: Mon Nov 15, 2010 4:58 pm

Re: What have you done to your Bronco today? (v.2)

Post by ZOSO »

grind and weld. Maybe tomorrow will be cut some.
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
socofn
Official CCB Member
Official CCB Member
Posts: 204
Joined: Sat Apr 02, 2011 10:52 am

Re: What have you done to your Bronco today? (v.2)

Post by socofn »

Got the heater upgrade finished today and a few other odds and ends. I also received the new u-joints for both drive shafts which should be in next week. I am trying to get everything put together for hunting in November. Jayson
74, MONEY EATER
Shawns Fords
Official CCB Member
Official CCB Member
Posts: 779
Joined: Sat Oct 02, 2010 6:36 pm

Re: What have you done to your Bronco today? (v.2)

Post by Shawns Fords »

Hauled it back home, put battery charger on it, need a set of points and decide whats next.
Viperwolf1

Re: What have you done to your Bronco today? (v.2)

Post by Viperwolf1 »

First day I didn't drive it in months.
User avatar
rdanford
Official CCB Member
Official CCB Member
Posts: 169
Joined: Wed Sep 29, 2010 7:12 pm

Re: What have you done to your Bronco today? (v.2)

Post by rdanford »

Tranny was pulled and picked up for it to be "ViperBuilt"
Royce
1977 Bronco...EFI, ViperBuilt C4, PS, PB, cut with 33's - Rebuild coming
1987 Porsche 951...LS1 swap - SOLD
2006 4Runner V8 Sport Edition
1998 4Runner...DD with 333k and counting
socofn
Official CCB Member
Official CCB Member
Posts: 204
Joined: Sat Apr 02, 2011 10:52 am

Re: What have you done to your Bronco today? (v.2)

Post by socofn »

Got the re-worked driveshafts installed after new parts and drove it. All seems well for know. I plan to drive it for the next week and if all goes well then off to hunt camp. JP
74, MONEY EATER
Post Reply