EFI questions-Fuel pressure guage and regulator

[tod]

Does anyone have a recommendation for a fuel pressure guage and regulator?
Pictures would be helpful too.
I am using 1991 Mustang fuel rails.
Thank you,
Tod

[Viperwolf1]

The stock regulator is fine unless you have a unique combination of parts that makes an adjustable one necessary.

I used AN-6 hose so adding a gauge was easy.

[tod]

I would like the ability to monitor and play with the pressure.
What brand are you using?
Can I adapt it to fit on the shraeder valve? I am using the stock rails and fittings.
Thank you, Tod

[Viperwolf1]

Monitoring pressure with a gauge is good. Playing with the pressure may not be so good. Really if the EFI system is working as it should there is no reason to change the pressure.

I have seen gauges that screw to the schrader port. I picked mine up at On-Track. http://www.ontrackperformanceparts.com/

[tod]

I like the idea of keeping it simple too. I will just get the guage for now.
I love the look of your hoses with AN fittings. I like the idea of a more secure connection too.
I will have to learn how to build the hoses, hopefully the tools are not cost prohibitive.

[Viperwolf1]

I used a vice, a couple wrenches, and a sharp chisel to cut the hose.

[tod]

I used a vice, a couple wrenches, and a sharp chisel to cut the hose.

That sounds like how my dentist might describe how he extracted my wisdom teeth.

You make everything sound so simple.
Thanks again,
Tod

[Kermit484]

I also used the stock regulator and picked my pressure gauge up at On-Track.