Blinker/Hazard Gremlin

Get answers to Bronco-related technical issues.
Post Reply
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Blinker/Hazard Gremlin

Post by airbur »

Sometimes when I use the blinkers both left and right blink at the same time....like they should with the hazards. Does this mean a relay is going out somewhere?
Sold: 1970 w/427W Injected Stroker
Viperwolf1

Re: Blinker/Hazard Gremlin

Post by Viperwolf1 »

Probably a bad turn signal switch.
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Re: Blinker/Hazard Gremlin

Post by airbur »

Viperwolf1 wrote:Probably a bad turn signal switch.


So that would be inside the column? This is a fairly new til-column from ididit.
Sold: 1970 w/427W Injected Stroker
Viperwolf1

Re: Blinker/Hazard Gremlin

Post by Viperwolf1 »

Oh. Could be a short between terminals/wires on the column connector. The GM connector has left and right signals on adjacent terminals. The troublesome firewall connectors are like that also on the '71 and older Broncos.

Is it just the dash indicators that are lighting up or the actual signals, front and rear?
Shawns Fords
Official CCB Member
Official CCB Member
Posts: 779
Joined: Sat Oct 02, 2010 6:36 pm

Re: Blinker/Hazard Gremlin

Post by Shawns Fords »

did you check the blinker fluid? :laughing2:
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Re: Blinker/Hazard Gremlin

Post by airbur »

Shawns Fords wrote:did you check the blinker fluid? :laughing2:


Damn...totally forgot about that stuff! I'll pick some up at Advance today;)
Sold: 1970 w/427W Injected Stroker
User avatar
RJLougee
Official CCB Member
Official CCB Member
Posts: 215
Joined: Thu Sep 30, 2010 12:40 pm

Re: Blinker/Hazard Gremlin

Post by RJLougee »

airbur wrote: Damn...totally forgot about that stuff! I'll pick some up at Advance today;)


You can't just pick that up anywhere.... You have to get it from one of the specialty houses.
Joe
'70 Bronco, MAF 5.0, NP435, D44/9", 4.10s, 33" MT/Rs, PS/PB
'71 Bronco, HP D60, Hi-9, 5.38/ARBs, 101" WB, 408 Stroker, AOD, Atlas, 40" MT/Rs, PiMP EFI.
'78 F150 SWB/Stepside/4WD, 351W/4R100/NP205, 35" KM2s, under const...
'81 Coachman Caper XL MH, 4WD, EFI 460/ZF/BW1356, D44/Sterling, 4.10s/35s, under const...
'83 Bronco, D60/Sterling, 5.13/ARBs, MAF EFI 351W/ZF/BW1356, 37" MT/Rs.
'12 Buggy, HPD60, Hi-9, 4.10s, Explorer 5.0, Atlas 4-speed, my chassis, EB skins.
And the latest project is a '99 Ranger Extra-Cab, custom frame/tube work, on 40s...
Viperwolf1

Re: Blinker/Hazard Gremlin

Post by Viperwolf1 »

It comes in right turn or left turn bottles.
User avatar
ClayJ
Official CCB Member
Official CCB Member
Posts: 521
Joined: Fri Oct 01, 2010 7:45 am

Re: Blinker/Hazard Gremlin

Post by ClayJ »

In our cold weather, you probably only want 20 weight, or they'll blink too slow
Shawns Fords
Official CCB Member
Official CCB Member
Posts: 779
Joined: Sat Oct 02, 2010 6:36 pm

Re: Blinker/Hazard Gremlin

Post by Shawns Fords »

Viperwolf1 wrote:It comes in right turn or left turn bottles.

I just saw this. I need to remember that one when I go in to the parts store the next time. :laughing2:
Lila76
Official CCB Member
Official CCB Member
Posts: 111
Joined: Mon Oct 24, 2011 11:02 am

Re: Blinker/Hazard Gremlin

Post by Lila76 »

Would your piston return springs be going bad? stirpot
What did you learn?
User avatar
airbur
Official CCB Member
Official CCB Member
Posts: 1721
Joined: Wed Sep 29, 2010 7:39 am

Blinker/Hazard Gremlin

Post by airbur »

Lila76 wrote:Would your piston return springs be going bad? stirpot


Man....I should have known I was in for it posting a gremlin lived in my blinkers! ;)
Sold: 1970 w/427W Injected Stroker
Post Reply