Badlands 66

[Moab Mike]

Rob, you are awesome!

[Badlands]

Woooooooooooo!!!!!!!!!!! Hooooooooooo!!!!!!!!!

[Entourage]

Nice job man! Now on to the fun stuff.

[ZOSO]

Just a little update. trouble shooting the idle issue now with howell. It either hunts real bad and stalls or idles at 1400rpm. So with their help hope to have that figued out. The starter went out saturday. Had to pick up a new one and got that put in. I think I have all the leaks fixed except for one. The trans linkage leaks.

[ZOSO]

Finally got a hold of howell. Need to get my sideband installed and get a number off the cal prom and get that info to them for a new cal prom. It wont idle because it seems to be running way lean.

[ZOSO]

It's all in the fuel pressure. Once I ppinched off the return line to raise the pressure at the injectors the hunting idle stopped and it runs. Now to pull the throttle body off and try to make a permanant adjustment. Also need to find a different fan. This one is too deep. Does not pull air through the radiator.

[Badlands]

Atta baby!

[Booger]

I have a couple of extra blades and spacers if you want to try them.

The problem is the fan is too far in the shroud so air doesn't come out from the shroud. With it inside the shroud i think the air just moves around not past. He said it doesnt blow across the engine then. If he moves the fan back any the blades hit the crank pulley. That fan has a lot of pitch to the blades. I think he has another one of mine to try or he will be able to use my fixed blade fan when i install my Taurus 2speed fan.

[ZOSO]

The other fan is the same way. Also got a fuel pressure gauge to put in the line to check it.

[Badlands]

Atta baby!

I was thinking more like Peter Pan, Man in Tights.

You don't tug on superman's cape
You don't into the wind
You don't pull the mask of the ol' lone ranger
And you don't mess around with my boy ZOSO!

[Rox Crusher]

Steve was itchin to burn rubber at breakfast

so near the finish line !

[ZOSO]

After running all the tests that howell suggested they are sending a new ecu cal prom. Should be here in a few days.

[ZOSO]

Haha yea probably. Waiting for the new cal prom to show up. Plus I leave tomorrow for a week on vacation.

[Rox Crusher]

Haha yea probably. Waiting for the new cal prom to show up. Plus I leave tomorrow for a week on vacation.

I'll take a win any way I can

any chance you guys will be extending your vacation ?

[ZOSO]

No extended vacation. The parts should be here when I get back so you have till next weekend to get yours running and driving. If that cal prom works then ill be deriving it next weekend.

[ZOSO]

IT DRIVES!!!!!!




Video coming soon.

[Badlands]

Woo hoo!!

http://www.youtube.com/watch?v=LAHXkmy1Fsc&feature=youtube_gdata_player

[ZOSO]

No big burn out yet. Just a little one backing in the garage. Want to get miles on it first.

[ZOSO]

I would if it was mine. I don't know how this motor was built.

[ZOSO]

Crappy quality but its proof.

[Booger]

What's sad is I've seen that look around here before.

[Jesus_man]

Rob, that camera clipped to your hat?

Sure sounds nice!

[ZOSO]

Trying to hold my phone and drive.

[Badlands]

At first I thought you were driving a boat at the lake when I seen the wooden steering wheel.

Wood at my age.....ah never mind.

[Rox Crusher]

At first I thought you were driving a boat at the lake when I seen the wooden steering wheel.

Wood at my age.....ah never mind.

whatcha talkin bout willis ?

yours is back on the road, I'm guessing you will have to go to the dr today since you have had wood for longer than 4 hours

[Rox Crusher]

Crappy quality but its proof.

Awesome job Rob !

[broncobuster]

Great job!!

Is the video of the burn out real? For us new folks, is it really a Pontiac engine?

An all wheels burn out is called for!

Terry

[Badlands]

Great job!!

Is the video of the burn out real? For us new folks, is it really a Pontiac engine?

An all wheels burn out is called for!

Terry

It's real, but not my rig. Although the 351 Windsor Rob is finishing up in there will probably turn them with a little brake assist.
zillacon is the king of burn outs.

[ZOSO]

Got the gauges working now it has water temp. Got it running pretty darn good. Installed a new alternator so now it charges. Need to hook up the kick down cable and it's time to put some miles on her. Hope the weather holds out saturday so I can go for a spin for more than around my neighborhood. Looking to drop it off next week for new exhaust.

[ZOSO]

Got most of the bugs worked out. Put 5 miles on it yesterday. Ran it to the gas station and filled it up. 80$ freaking bucks. Plan to drive it today. Gonna have to tear down the front suspension. Needs to have the caster measured and fixed. It wanders really bad. Steering doesn't return to center while driving. Kinda a scary to drive.