1973 Crawler

A place for members to post a little about themselves and a picture of your rig.
Post Reply
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

1973 Crawler

Post by Jesus_man »

Got a PM over on CB.com and thought this would be a good thing to sign up for.

My name is J.D. and I am a CO native, currently in Falcon. My first bronco was a '74 and bone stock when I bought it. I added F-150 springs up front an Add-A-Leafs in the rear, 33x14.50 swampers. Then an Np435 and disc brakes on the front. weeks later a drunk hit my parked bronco and totaled it. After fighting with insurance a couple months, we finally settled and I turned around and bought a '73 that was setup pretty nicely. It's got a 351W EFI, ZF-5, HP D44 and HD9 both with discs narrowed and 4.10's. It also is setting on 3" suspension lift and 2" body lift with 35x12.50 MTR's.

Since owning it, I have added Hydro Assist steering, a longer arm for the throttle for better control, Rock sliders, rear tire carrier bumper, etc. and the best mod was an Atlas 4spd.

Image

Image

Right now she's down and out after a trip to Penrose last weekend.

Anyway, looking forward to meeting new bronco lovers and also seeing whom I already know!

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Entourage
Official CCB Member
Official CCB Member
Posts: 3275
Joined: Wed Sep 29, 2010 4:45 pm

Re: 1973 Crawler

Post by Entourage »

Hey there - way excited you found us. This club is growing like crazy! A lot of talented members with a broad range of Broncos. From Mild to Wild - we got it all - even have a Nick's Trix! Sounds like you are definitely a hard core trail runner with some great mods.

Welcome to the club and look forward to meeting up sometime.
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: 1973 Crawler

Post by Colorado75bronc »

nice rig, welcome to the club, im in the springs and would love to see your truck sometime
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Thanks for the welcome. This is a great (and local) site. I hope to meet all of you and some point in time!

CO75 - Sure, it's not much to look at tho.

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
99f250
Official CCB Member
Official CCB Member
Posts: 74
Joined: Thu Sep 30, 2010 8:41 pm

Re: 1973 Crawler

Post by 99f250 »

Hi J.D.,

good to see you over here as well at CPSC. I thought you were in Texas? Did you move back?

jeff
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Hey Jeff - guess you got my response in the other thread. Man, it's good to be back from TX!

J.D.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Just a little addition from my humble beginnings. With the impending move, we're going thru some items in our house and ran across these old pics. These were my first bronco. You might recall the story about the drunk driver who totaled it for me.

The day the '74 came home:
Image
Big flex:
Image

After Add-A-leaf, F-150 coils, 33x14.5r15 SSR's:
Image

The two that did the work: (dang I still had hair!)
Image

That suspension flexed like a big dog...lol:

Image

Good memories! That was a budget build if there ever was one!
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

1973 Crawler

Post by Colorado75bronc »

I like it man, but I like the current rig best, is that Ty in the photo with u?
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Yeah, it is. We've been wrenching together for a long time!
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
ImIn4Lo
Official CCB Member
Official CCB Member
Posts: 94
Joined: Thu Mar 01, 2012 9:45 am

Re: 1973 Crawler

Post by ImIn4Lo »

MAN!!! That uncut look with 33's looks awesome!!! Im a COS guy too!! We should have a COS Bronco meet!!!!!
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: 1973 Crawler

Post by akaFrankCastle »

Im a COS guy too!! We should have a COS Bronco meet!!!!!


How's a BBQ sound? cookin

Keep your eyes peeled on the Staging Area for a BBQ in COS in August.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

I'd love to do something sooner. I fly out July 16th. Can we swing a week night in the next two weeks?

It'd be cool to overtake a Sonic or something along those lines...
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

1973 Crawler

Post by akaFrankCastle »

I like the idea of a Sonic cruise night of sorts. Let's do some wargaming in the staging area and put something together!
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
ZOSO
Moderator
Moderator
Posts: 3910
Joined: Mon Nov 15, 2010 4:58 pm

Re: 1973 Crawler

Post by ZOSO »

From the looks of the pic looks like ty did all the work.
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

ZOSO wrote:From the looks of the pic looks like ty did all the work.


LOL, I was wondering who would be the first to notice. He said the same thing.

The truth is we were swapping the tranny to an NP435 over the weekend, and just had some little button up items left on Sunday. When I got back from church, Ty had got most of it done and looked as you see him in the pic. He gets a lot of credit for showing me a lot of what I know about mechanics. My dad gave me a good base, but Ty helped me with general diagnosis and repair. A good guy to have around!
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
cracker
Official CCB Member
Official CCB Member
Posts: 113
Joined: Mon Oct 04, 2010 8:19 am

Re: 1973 Crawler

Post by cracker »

Looks good! A meet in Springs would work for me as well, since I am in Pueblo.... Heck, I might even drive my Bronco up... icon biggin .
1-1966 Bronco
1-1967 Bronco
1-1969 Bronco
2-1973 Broncos
And a couple even run.....
User avatar
ClayJ
Official CCB Member
Official CCB Member
Posts: 521
Joined: Fri Oct 01, 2010 7:45 am

Re: 1973 Crawler

Post by ClayJ »

When do you have to put your baby to bed for the move? That'll be a sad day.
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

This weekend... :(
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Goodbye Old friend. I'll be back.
Image
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
ImIn4Lo
Official CCB Member
Official CCB Member
Posts: 94
Joined: Thu Mar 01, 2012 9:45 am

Re: 1973 Crawler

Post by ImIn4Lo »

Wow... Sad a sad sight.... Glad the ole steed will be safe fore your return.... Safe travels JD!!!!
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Thanks. Two more weeks from today!! Soooo much to do.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: 1973 Crawler

Post by akaFrankCastle »

You know, if you want I can stretch its legs out on the trail for you while you're gone. icon biggin

Will that be home for the entire duration?
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Thanks Zack, I appreciate the offer and will, uh certainly keep that in mind...

Yes, it'll remain there.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
ZOSO
Moderator
Moderator
Posts: 3910
Joined: Mon Nov 15, 2010 4:58 pm

Re: 1973 Crawler

Post by ZOSO »

Sad sight for sure. But its better than sitting in a field or being sold. Be sure to add some stabil to the gas and fresh oil. I'd also set a few mouse traps in the crate so they don't get into the bronco and chew up the wiring and seats.
Rob

74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.

04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine

New project: 77 Bronco Ranger, body work and more body work.

Very little left of a 72 durango tan explorer sport
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: 1973 Crawler

Post by hockeydad4-22 »

JD,

That may be one of the saddest pictures I have ever seen of a bronco. But knowing she will be sitting there paitently waiting for your safe return makes it much easier.

Take Care and safe travels my friend.
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: 1973 Crawler

Post by Jesus_man »

Rob, got all that done! Hope it's ok! We made sure and sealed off any holes we found in the floor and put rat poison all around. We'll freshen that every once in a while.

Thanks Greg.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Kinder
Official CCB Member
Official CCB Member
Posts: 4372
Joined: Wed Sep 29, 2010 9:03 pm

1973 Crawler

Post by Kinder »

Man I may just shed a tear. Reminds me of when I put mine in storage for my year long deployment, which it handled very well.
Best to Date MPG: 26.6
Post Reply