I'm looking to add some relays for a fuel pump, lights etc, and wouldn't mind some more 12v circuits for stereo and CB. Something along the lines of this:
http://www.autotrendefi.com/utv_fuse_block.html
but with couple more relays. Anyone have any suggestions on where to start that doesn't cost $120 (or painless', which is something like $279)? I know I can make one from components, but really like the idea of having everything inside one box.
Auxiliary relays
- hockeydad4-22
- Official CCB Member

- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
Re: Auxiliary relays
DUDE! That is AWESOME!!!!! Like the site says - even simple wiring can be enough to give me heart burn... (or sleepless nights). I will gladly pay for "everything on one box"! (of course the budget would prefer I do it as inexpensively as possible)
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Auxiliary relays
I've been doing some more research since I posted up (why do I always research, find very little, post up, then find the cool stuff?!?!) and found this:
http://forum.ih8mud.com/merchandise-sto ... panel.html
I think it may be the ticket, given that it comes with all the fuses and 5 relays. The box is $25 just by itself, and does not come with wires or anything else, so this is looking like a relatively good deal once you figure in the cost of the relays. Not sure I still won't DIY it, but I was pretty happy to find this.
http://forum.ih8mud.com/merchandise-sto ... panel.html
I think it may be the ticket, given that it comes with all the fuses and 5 relays. The box is $25 just by itself, and does not come with wires or anything else, so this is looking like a relatively good deal once you figure in the cost of the relays. Not sure I still won't DIY it, but I was pretty happy to find this.
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Auxiliary relays
When I get home I'll show you what I did on my 79. It was simple and cheap.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Auxiliary relays
Thanks! I like both simple and cheap.
- Booger
- Official CCB Member

- Posts: 809
- Joined: Thu Dec 23, 2010 5:55 pm
Re: Auxiliary relays
Justin wrote:I've been doing some more research since I posted up (why do I always research, find very little, post up, then find the cool stuff?!?!) and found this:
http://forum.ih8mud.com/merchandise-sto ... panel.html
I think it may be the ticket, given that it comes with all the fuses and 5 relays. The box is $25 just by itself, and does not come with wires or anything else, so this is looking like a relatively good deal once you figure in the cost of the relays. Not sure I still won't DIY it, but I was pretty happy to find this.
Justin that setup is pretty slick looking though.
Bob - Turning hydrocarbons into noise since 1970
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
Spiritual owner of the now Zoso mobile (1974 Bronco Ranger - EFI 351W-4R70W-ARB front and rear-STC softtop- High Country hood-3 1/2" WH lift- Cross inboard rear shock mnt- Duffs bumpers- Warn 8274- 33's- Cheby disc conversion)
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Auxiliary relays
I made this with all auto parts store stuff. Total was maybe 75 bucks. How I wired it is I came off the ignition switch and triggered a relay to power the fuse block setup on the left. That fuse block send power to all my switches. The other fuse block is directly off the battery. That feeds power to all the relays for the devices. I can draw it up in a diagram if it would make more sense.


Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport