I pulled the plugs to see if it was really running lean or not and it appears to be running rich actually. I guess the O2 sensors are not reading at all.
I don't think its related but #6 looks like there is a little oil on it - I hope my piston rings are not bad. Otherwise, they're pretty carboned up; looks like its running rich.
After I pulled the plugs I was curious if the computer was still showing a lean condition so I pulled codes again. KOEO 51,22,53,54,35,81,82,85,84
So it looks like there is a problem with PIN 46 (or all my sensors are bad which isn't likely) and my O2 sensors are not reading at all (wiring?). When I get home I'm going to reinstall the plugs, reset codes and re-run KOEO and KOER and make sure there really is a prob with PIN 46 since this is prob is new.
At this point I'm at my wits end. I've replaced the MAF, BP, o2 and computer. I can't keep throwing money at it. Whats it going to take to get this Bronco running. Should I take it somewhere and if so, where? Garage party at my place, beer and food provided?
