***JACKPOT*** Lots of steel panels and parts!!!
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
***JACKPOT*** Lots of steel panels and parts!!!
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
- hockeydad4-22
- Official CCB Member

- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
You are correct sir, that is an amazing deal... And i need most everything you have listed. Unfortunately, the budget will not allow it right now. Someone is going to get a great deal.
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
That's what I was thinkin'...Right?
I'll help lift and load!!!
I'll help lift and load!!!
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Green fender pic. Looks like a DBE or Stroppe fender laying on the ground to the right of it.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Stroppe???
You do not have the required permissions to view the files attached to this post.
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Well, it's got the right colors. But more likely its from a Denver Bronco edition. Same paint scheme.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
On second thought. It could be a Stroppe fender. Not that there would be anything super special about it. Just another fender with a Stroppe paint job.
The first few generations of Stroppe were painted normal Ford colors before shipping out to CA for Stroppe to modify. Seeing as this one has the underlying blue/green, it could have been on a Baja truck. A Denver Bronco Edition truck would have no stock Ford colors under that paint.
The first few generations of Stroppe were painted normal Ford colors before shipping out to CA for Stroppe to modify. Seeing as this one has the underlying blue/green, it could have been on a Baja truck. A Denver Bronco Edition truck would have no stock Ford colors under that paint.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- Broncoguy73
- Official CCB Member

- Posts: 126
- Joined: Mon Feb 20, 2012 9:09 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I need those doors!
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I could use one of the fenders. If I had the $$ I'd be tempted to buy the lot and part it out.
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I'm still trying to figure out what I want/need to see what my part of the group buy would be. Okay, so it's more want than need.
"Hi. My name is Frank and I'm a Bronco parts hoarder."
"Hi. My name is Frank and I'm a Bronco parts hoarder."
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Divide and Conquer Boyz!!!
YOU CAN DOOOO IT!!!
YOU CAN DOOOO IT!!!
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Can ya snap a pic of the $50 grill? You said the other two are 69-77. Is the third one pre-69?
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Grrrrrr.
Right now, I'm in for:
Both rear quarters (200)
The Stroppe fender (50)
The windshield/dash combo (50)
And MAYBE the $50 grill.
Now, I just need some co-buyers. Anyone interested? Justin? Broncoguy73?
Right now, I'm in for:
Both rear quarters (200)
The Stroppe fender (50)
The windshield/dash combo (50)
And MAYBE the $50 grill.
Now, I just need some co-buyers. Anyone interested? Justin? Broncoguy73?
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Zac could you get me a driver and passenger fender uncut? I'll get you the cash immediately if you can do it
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
- Broncoguy73
- Official CCB Member

- Posts: 126
- Joined: Mon Feb 20, 2012 9:09 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I'm in for the doors as long as they work and are in decent shape.
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I'd take a dent free passenger's side fender, reasonably cut would be fine.
- plumbdoctor
- Official CCB Member

- Posts: 568
- Joined: Tue Oct 05, 2010 9:17 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
i would take one of the grills
Your sh!* is my bread and butter!
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I need a driver front fender and a section of rear floor if anyone has one.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
WoW! I wasn't expecting such a great turnout!
Thanks for all the interest guys:)
Thanks for all the interest guys:)
You do not have the required permissions to view the files attached to this post.
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
-
bronco_tom
- Official CCB Member

- Posts: 9
- Joined: Thu Jan 06, 2011 9:53 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Next in line for doors. Let me know if they are still available... And a driver side fender.
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Guys, I'm out. Area 51 is maxed out on storage space. My storage unit is full. And next week I go from a two car garage to a one car when we move to the apartment. Aside from that, funds are just too low for me to pick up everything I want.
Sorry Mick
Sorry Mick
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- Broncoguy73
- Official CCB Member

- Posts: 126
- Joined: Mon Feb 20, 2012 9:09 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Sorry to hear that. I'm still interested in the doors if we can work something out.
-
bert49
- Official CCB Member

- Posts: 8
- Joined: Sun Jan 06, 2013 8:48 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
pass fender and early grill
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Let me sit on my stockpile for a week boys. If I haven't sold the lot... I'll start emailing and pm-ing you all from top go bottom to see if we can make some deals!
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
If you feel like dragging it out, we've also got a swap meet coming up on the 30th, you'd have a good shot at re-homing this stuff there.
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I'd love that, but no trailer 

1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Where are you located? We might be able to help.
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
Up in Eaton... 20 miles east of Ft Collins, ~ 60 miles North of Denver
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: ***JACKPOT*** Lots of steel panels and parts!!!
If your serious about making the trip to the swap Meet I might me persuaded to come get all that stuff for ya and take it down there. Just shoot me a PM and we can work out the details.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- mickphatmac
- Official CCB Member

- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: ***JACKPOT*** Lots of steel panels and parts!!!
I have a 12-year-old in baseball that has a tournament in Greeley that day.
I wouldn't miss that for the world! Certainly you can understand ;)
I wouldn't miss that for the world! Certainly you can understand ;)
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
