Intermediate Axle and Half Axle and CV Drive Axle
-
75DBE
- Official CCB Member

- Posts: 319
- Joined: Sat Jul 16, 2011 7:37 am
Intermediate Axle and Half Axle and CV Drive Axle
Ok, I am confused. First, this is a 2004 Dodge Ram 1500 4x4 not a Bronco, sorry. But the dealer wants to charge me $130 for an Intermediate Axle Shaft and $315 for a Half Axle Shaft. Don't laugh, but are these two parts together what makes up the CV Drive Axle Assembly or is that something else altogether? I want to buy the parts that I need elsewhere to save the money but I don't know yet what I should be buying. HELP!
Now with disk brakes, has turned into my sons daily driver while he is home on Christmas break.
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Intermediate Axle and Half Axle and CV Drive Axle
I am not familiar with the dodges, but my guess is it could have something to do with the automatic hubs. Could be that there is a inner shaft (intermediate) that goes from the diff to a collar, then the half shaft that goes from that collar to the knuckle. The collar slides to engage the front axle.
i could be way off, but that may explain it.
i could be way off, but that may explain it.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- REH
- Official CCB Member

- Posts: 56
- Joined: Fri Oct 07, 2011 11:28 am
Re: Intermediate Axle and Half Axle and CV Drive Axle
I'm not that up on dodges either but,
dodge uses a two piece axle (I believe the right side) and there is a coller that slides back and forth over the ends of each axle, locking them together (4WD) or unlocking them (2WD) I belive that the inner axle is the intermediate and the outer is the Half axle shaft.
dodge uses a two piece axle (I believe the right side) and there is a coller that slides back and forth over the ends of each axle, locking them together (4WD) or unlocking them (2WD) I belive that the inner axle is the intermediate and the outer is the Half axle shaft.
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Intermediate Axle and Half Axle and CV Drive Axle
REH is correct. They have a center axle disconnect. Crawl under it and on the passenger side tube you'll see the disconnect. The passenger side has 3 shafts total. an inner from diff to disconnect. disconnect to ujoint. the the outer shaft. If the axle doesnt engage or disengage I'd look at the actuator on the axle first. If you need axles you can pick them up from a junk yard easy.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: Intermediate Axle and Half Axle and CV Drive Axle
Guys this is an independent suspension truck, it has 3 shafts total, two cv axles, one per side, and one intermediate shaft on the passenger side that goes between the diff and the RF cv axle through an axle carrier tube, i think they still use a disconnect, but if they do its more like the 88 and up chevy stuff with a synchro. John if you need me to take a look at it one night shoot me a text
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
- ZOSO
- Moderator

- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Intermediate Axle and Half Axle and CV Drive Axle
what year was it that dodge went IFS? I thought it was 05'
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: Intermediate Axle and Half Axle and CV Drive Axle
03 or 04, plus I've seen his truck, it was whatever year they first changed to the big body, from then on all of the halftons went IFS
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's