Swap Meet-30 March-UPDATED!

[Kinder]

Have old junk that nobody wants cluttering up your garage, things like a 3 speed, toasted xfer case, how about a 3 spd steering column, junked alternator or starter? Those old items could be used to cover the core charges when upgrading our Broncos, so bring them out to the swap meet and we can have a core pile to pick over. It saved me some money when I found my 5 spd and turned in a 3 spd to cover the core charge at the local P&P. If nobody needs them for cores then we'll add them to the scrap pile and get a few bucks for the club.

[casadejohnson]

i'll be there.. have some stuff that needs to go and maybe some useful parts. I have some rear axle shafts for a Dana 60 and some other stuff..

I didn't even think about seeing you at the breakfast, I just sent you the brake imbalance switch today. You should have a UPS box on your door step tomorrow.

i'll pay ya back.. I will find something around here to send you ;)

No need to pay me back, did the box get there today?

[Eck]

I am hoping to show up in my FORD....Fusion (company car). I have diamond plated rocker panel covers, diamond plate tunnel cover, gray console, and any other junk I have replaced in the short 6 months I have been working on my rig!

[akaFrankCastle]

Casa! You going to have any 4x4x2 boxes witcha?

[landshark]

No need to pay me back, did the box get there today?

Yup got it thanks - very cool i can finally put that CEL in the dash!

[casadejohnson]

Casa! You going to have any 4x4x2 boxes witcha?

I have one I was planning on using for my 68 that I need to finish up. I could probably part with it since I won't be getting to that project for a while. Just need to find the time to complete it between now and then.

[akaFrankCastle]

Ah, well don't rush it on my behalf. Project X still needs feet. Was just thinking if you had one already built/on the shelf.

[71 bass boat]

is the swapmeet still for this sat the 30th of March?

[hockeydad4-22]

Absolutely, ThIs Saturday

[71 bass boat]

Sweet ill be there.

[Woodscaper]

Of coarse I cant make it to the swap meet but I have a few parts I can donate to the cause for donations. If they dont "sell" they can be scrap.
Is anyone able and willing to take them Along ?

I have some door panels, exuast manifolds, scrap metal, aluminum wheels (16.5 x 9 3/4 8 lug), and some other odds & ends.

[akaFrankCastle]

Those wheels 8x6.5"? If so, I'll haul your parts.

[Justin]

I'm happy to transport as well. Feel free to shoot me your address and I can pick them up. You around tomorrow evening?

[crawlercreations]

I have a few things to donate. '78-'79 high pinion full width Dana 44 housing, stock knuckles, etc. Anyone able to get them there? The diff is very dirty and full of oil still.

[darkmagus]

Just a heads up on a few things I'll be bringing. Unfortunately I won't be able to stay long because I have to work. I'll probably show up early though.

ΓÇó 2" body lift - never used
ΓÇó Urethane track bar bushings - never used
ΓÇó Drop pitman arm - installed for about 5 minutes, too low for mine
ΓÇó Pitman from 2x4 donor box - used
ΓÇó Auxiliary tank filler hard pipe - used
ΓÇó J-shifter with boot - very used
ΓÇó Rubber valve cover gaskets - installed for about a day
ΓÇó 3 15x7" chrome steel wheels - need love
ΓÇó f250 camper special brake master - never used

[73_Sport]

Hey, kind of a two part post, I decided I better join (finally!), my wife and I moved back to CO back in July of last year and my Bronco (owned since '89) had to be kind of thrown together to come out, so I've been sorting out issues and little fixes since we got here...Should be ready for the trip in the AM...long story short, look forward to meeting you all and checking out your rigs!

Chris and Amber Hogan

[ZOSO]

Just an fyi I just saw a sign that said i25 is closed from i70 to speer until 8am. So beware for the northern folks.

[Eck]

See everyone in the morning.. looking forward to it. Just want to throw it out there, that if anyone is free/bored tomorrow after the swap meet and would like to spend some time in the nice weather helping me with the Bronco, I could use some help.

I have a few projects that I am working on getting done so should be plenty to do.

I need to start sanding/prepping for paint and I have the front clip dissasembled as well as the doors, hood, and tailgate. I am also going to be installing rectangular tube rockers tomorrow and any decent welders would be very welcomed. I also have a carb rebuild kit for my Holley 2-barral carb but have never tuned a carb so could use anyone with knowledge to help with that.

If anyone is coming to help, I only have one orbital sander and one angle grinder so extra sanders would be helpful.

See everyone tomorrow!

[Woodscaper]

When will the scrap be turned in? I will try to get some stuff to whoever is in charge before they go to scrap yard.

Zach- If you want the wheels you can have them but you have to take the tires that are mounted to them also.

[Justin]

I can get it from you and make sure it gets turned in.

[akaFrankCastle]

I sure hope people are looking for parts/cores. My 3" lift is about a 1.5" in the rear with all the stuff I'm hauling up. See you guys in the morning!

Any other COS/south people headed up? Caravan? I drive like a 70 year old man but if you can tolerate that, I'd love the company.

Probably head out of here around 6:15. Stop off at North Academy for coffee and roll on north from there.

[Colorado75bronc]

I'll be leaving my house at 6:15, meet you at the same diamond shamrock at academy and I-25? Call me zac

[casadejohnson]

I just finished loading some scrap metal and parts into the back of the 66. Looks like the I-25 closure is going to cost me 20-30 minutes in travel time. See you all in a few hours.

[ak68]

Enjoy your swap meet today. My wife and I are planning a move to Grand Junction later this year and I will be bringing my 1968 bronco with me. I hope to meet some bronco owners in the junction area.

[Justin]

A Trip Report has been created. See:

viewtopic.php?f=10&t=5099