Flatliner Rod Shop BBQ September 7th.

Post by **Flatliner Rod Shop** » Tue Jul 02, 2013 9:43 am

ItΓÇÖs BBQ Time!
Saturday, September 7, 6pm at Flatliner.

WeΓÇÖve been talking about it for years. This year weΓÇÖre finally having a SummerΓÇÖs end barbecue at Flatliner Rod Shop (approximately 144th and Colorado in south Brighton / north Thornton).

Bring your car (a small side dish will also be welcomed)!

So, bring your family, bring your car, bring your appetite! Oh, and some chairs. Let us know how many will be attending so we can prepare appropriately. PM me for an address. Thanks!

Nick Pfannenstiel
Flatliner Rod Shop

Post by **Crazyone** » Wed Jul 03, 2013 6:39 am

Thanks for the invitation. I'll put it on the calendar. I have been wanting to come see your shop.

Post by **Flatliner Rod Shop** » Thu Jul 04, 2013 7:28 am

It should be a great time! We're hoping it'll be like a little car show. We have about 2.3 acres to work with (less the roof area of the house and two shops), so it'll be interesting to see how it fills up. We recently had a BBQ with 50 people and we had tons of room to spare. An automotive newsletter will be doing photos and an article on the shop at that time.

Also, we have some potential Bronco products in the works and it'll be a good time to see if there's enough interest for us to push forward. There will be local hot rod shop competitors present, so we will have to talk in private regarding services and products. At the time, our main focus is bodywork and paint, though design and fabrication are my main passion. As for the Bronco parts, I don't see them being a real money-maker at the time, so much as a way to get the name out there.

Which reminds me, if anybody has the contact for the guy who makes the fiberglass Bronco parts here in CO, please send him the invite!

We will have some shirts available, but only a few, as we have pretty much exhausted the last batch. We plan on doing a classy Bronco shirt soon.

Nick
Flatliner Rod Shop

Post by **Kinder** » Thu Jul 04, 2013 12:28 pm

Added it to the calendar.

Post by **Flatliner Rod Shop** » Thu Jul 04, 2013 2:06 pm

Excellent. I think what might be best is to just let me know via this thread and I'll PM the participants the address in a few weeks. Looks like we're going to have a decent turnout!

Post by **Colorado75bronc** » Sat Jul 06, 2013 9:01 am

I'd love to make this one, ill put it on the calendar as well, and the fiberglass guy is named Jay, his screen name here is JGZ

Post by **MoneyPit** » Mon Jul 08, 2013 7:36 am

Love BBQ and talking about Broncos-what a great combination! I'll put it on the calendar. Thanks for the invitation.

Post by **Justin** » Sun Aug 25, 2013 9:29 am

Wanted to give this one a bump. Flatliner does some amazing work and he'd love to see a bunch of EBs turn up. I heard a rumor that there could be some EB stuff in the works...

Post by **Flatliner Rod Shop** » Sun Aug 25, 2013 9:43 am

Yes, a new hood design, but we might have hit some complications. The design is sound, but the fact that I started with an aftermarket steel hood might have some implications on whether or not it can be successfully reproduced for stock EBs (body panels lining up properly). So, while the hood will still be completed, we will have to do some comparisons to stock hoods to see if the hood will work. If not, I'm tempted to fork over some dough for a stock hood so we can start over (glutton for punishment...that would be redo #4!!!).

Post by **Kinder** » Sun Aug 25, 2013 11:01 am

If you just need a factory hood for hire I can help, but if you are cutting it up we'd have to talk $.

Post by **Flatliner Rod Shop** » Sun Aug 25, 2013 11:10 am

If we do it again, I probably won't be needing to cut anything up, as we'd be going some other route. But I'd still like to entertain the idea of using the hood we've got.

Another option would be to slap

this hood on a stock Bronco to check fitment.

IF this hood ever goes into production, the design will most likely be given to somebody who knows what they are doing. We'd make no money on it at all, just have our name attached to it (the Flatliner hood, or something similar).

Not sure how it'll play out, but it's fun to entertain the idea and gauge interest!

We'd like to do other Bronco parts, as well, but it is totally dependent on what reproducible items get incorporated on the Flatliner Bronco.

Post by **Flatliner Rod Shop** » Sun Sep 01, 2013 10:51 am

Just a reminder this is next weekend. If anybody needs an address, just PM me and I'll get it to you ASAP. We are off of 144th and Colorado.

Nick

Post by **Justin** » Sat Sep 07, 2013 2:06 pm

Had hope make this, looks like im probably getting called into work. Have fun!

Post by **Colorado75bronc** » Sat Sep 07, 2013 3:01 pm

I wanted to make this but I've just got too much going on this weekend, I'm really sorry guys, but ill be sure to come up and check the shop out sometime soon hopefully

www.ColoradoClassicBroncos.com