New to Colorado.

A place for members to post a little about themselves and a picture of your rig.
Post Reply
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

New to Colorado.

Post by Geologist »

Just moved here from NC. I am a 31 year old former Ford Technician turned geophysicist. I have owned my Bronco for about 5 years now. I have been waiting for a garage to work on it and now I have it. It has been a daily driver until about a year ago when the transmission (T18) and transfer case (Dana 20) began leaking so bad I was refilling them once a week. I have already began removing them. They should be out tomorrow and then I rebuild them both.

While it was sitting for about a year, cracks appeared on both quarter panels between the upper and lower (at the seam). I bought it from a guy who did the body work and I guess he used a lot of BONDO. spank

Both door window frames just recently broke (near the windshield), so I have to re-weld those.

My to do list is large, but my wallet is small. So for now, I will be fixing what needs to be fixed. A few things I want to do:
1) Coyote motor or 4bt (can't decide)
2) 5 inch lift and 38" tires
3) Cowl hood and repair the body
4) Better seats.


I look forward to meeting fellow Bronco nuts. If you would like to see a closer look of the bronco you can see them here :

http://s366.photobucket.com/user/JFulle ... t=3&page=1
You do not have the required permissions to view the files attached to this post.
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

I forgot to add that I have not been able to come up with a name for my Bronco. Any suggestions?
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: New to Colorado.

Post by Justin »

Nice rig! No name suggestions, sorry.
User avatar
Kinder
Official CCB Member
Official CCB Member
Posts: 4372
Joined: Wed Sep 29, 2010 9:03 pm

Re: New to Colorado.

Post by Kinder »

Looks great, I saw your post on ACB so I know folks have pointed you in the right direction. If you'd like a hand with anything just ask, I'd love to help with the trans.
Best to Date MPG: 26.6
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

Thanks Kinder and Justin.

Kinder, I noticed many people belong to both ACB and CCB. Feel free to drop by tomorrow after lunch anytime if you like. I am picking up a transmission jack in the morning to make things a little easier.
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: New to Colorado.

Post by Colorado75bronc »

That's awesome, look forward to seeing it in person, I have one suggestion, Mean Green :) otherwise I've got nothing
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

I like Mean Green!! Best I have heard yet. PM me if you need my address and plan on dropping by.
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

Just scored a parts washer and transmission jack for $100. Time to drop the tranny and transfer case
You do not have the required permissions to view the files attached to this post.
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
B.O.B.
Official CCB Member
Official CCB Member
Posts: 777
Joined: Thu Nov 11, 2010 9:31 am

Re: New to Colorado.

Post by B.O.B. »

go with Kermit.....Mean I=green is so over used, ;-)
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: New to Colorado.

Post by Colorado75bronc »

We already have a Kermit, don Alison's hunting bronco is Kermit
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Kinder
Official CCB Member
Official CCB Member
Posts: 4372
Joined: Wed Sep 29, 2010 9:03 pm

Re: New to Colorado.

Post by Kinder »

Nice score
Best to Date MPG: 26.6
B.O.B.
Official CCB Member
Official CCB Member
Posts: 777
Joined: Thu Nov 11, 2010 9:31 am

Re: New to Colorado.

Post by B.O.B. »

well if Kermit is taken, you can call it slimmer until all the leaks are fixed
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: New to Colorado.

Post by Jesus_man »

Nice ride!! Welcome to the club. You are in the right place.

What brought you to CO?
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

Jesus_man wrote:Nice ride!! Welcome to the club. You are in the right place.

What brought you to CO?


Thanks! So far my wife and I have really enjoyed it. The weather here is amazing! We relocated because of work. We lived in a very small town in the Mountains of NC. Not much there other then Walmart and fast food. Kind of a culture shock here but most people seem to be real nice.
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: New to Colorado.

Post by Colorado75bronc »

I live in colorado springs, but I hope to see you at one of the events
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

Colorado75bronc wrote:We already have a Kermit, don Alison's hunting bronco is Kermit


Mean green is out, no Kermit either..Now you see why it has been tough to name.

B.O.B. wrote:well if Kermit is taken, you can call it slimmer until all the leaks are fixed


Slimmer, from a classic film.

Colorado75bronc wrote:I live in colorado springs, but I hope to see you at one of the events


Colorado Springs is a nice place too! I will do my best to be at the next event. Trying to make the one at Bronco Hut this month.
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: New to Colorado.

Post by Colorado75bronc »

I'm planning on going to the meet this month, hope to see ya there
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
casadejohnson
Official CCB Member
Official CCB Member
Posts: 708
Joined: Tue Oct 05, 2010 8:30 pm

Re: New to Colorado.

Post by casadejohnson »

"Kato" would be my suggestion.
User avatar
D&D72
Official CCB Member
Official CCB Member
Posts: 989
Joined: Sun Sep 11, 2011 9:49 pm

Re: New to Colorado.

Post by D&D72 »

I'm with Casa, "Kato" would be an excellent name!
That guy John.... whatta Jerk.
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

D&D72 wrote:I'm with Casa, "Kato" would be an excellent name!


"Kato", is that from The Green Hornet?
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Viperwolf1
Official CCB Member
Official CCB Member
Posts: 1485
Joined: Tue May 07, 2013 9:37 pm

Re: New to Colorado.

Post by Viperwolf1 »

Geologist wrote:
D&D72 wrote:I'm with Casa, "Kato" would be an excellent name!


"Kato", is that from The Green Hornet?


Green Hornet or OJ Simpson trial.
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

Viperwolf1 wrote:
Geologist wrote:
D&D72 wrote:I'm with Casa, "Kato" would be an excellent name!


"Kato", is that from The Green Hornet?


Green Hornet or OJ Simpson trial.


LOL...forgot about the OJ Simpson trial! lmao
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
User avatar
Eck
Official CCB Member
Official CCB Member
Posts: 2462
Joined: Thu Oct 25, 2012 8:33 pm

Re: New to Colorado.

Post by Eck »

I think you should go with Slimer. Image
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
User avatar
Geologist
Official CCB Member
Official CCB Member
Posts: 175
Joined: Wed Jul 24, 2013 10:05 am

Re: New to Colorado.

Post by Geologist »

Have you seen what the car looks like now? Sad!

Here is the article...
http://www.news.com.au/entertainment/mo ... 6739825502
You do not have the required permissions to view the files attached to this post.
1966 Bronco, rebuilt 302, Twin shift Dana 20, T19, 3.5 suspension lift, 2 inch body, 35x12.50 tires
Post Reply