35's Mickey Thompson Baja MTZ's
- Dirtheadz
- Official CCB Member

- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
35's Mickey Thompson Baja MTZ's
Full set of 35's. Mickey Thompson MTZ's Have 9/32 (5/16 of inch). Show some rock rash. On 15x8 steel wheels. $250 for the set. Call/ text or PM me. In the springs. 719-237-0999
!!! Being original is a blueprint for followers !!!
- Dirtheadz
- Official CCB Member

- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
Re: 35's Mickey Thompson Baja MTZ's
Here's a pic
You do not have the required permissions to view the files attached to this post.
!!! Being original is a blueprint for followers !!!
- Dirtheadz
- Official CCB Member

- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
Re: 35's Mickey Thompson Baja MTZ's
Here's the depth
You do not have the required permissions to view the files attached to this post.
!!! Being original is a blueprint for followers !!!
- Kinder
- Official CCB Member

- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
Re: 35's Mickey Thompson Baja MTZ's
Interested, can I get a pic showing the wear pattern on the tires and what is the back spacing on the rims.
Best to Date MPG: 26.6
-
B.O.B.
- Official CCB Member

- Posts: 777
- Joined: Thu Nov 11, 2010 9:31 am
Re: 35's Mickey Thompson Baja MTZ's
If those are normal wagon wheels then I believe that b.s. should be 3.75 inches. usually 15 x 8 -19mm offset.
best way to figure out back spacing: take width of wheel and add .5 inch. divide by 2. that is the center of the wheel (0 offset or for a 8" wheel 4.25 backspacing). Then remember there is about 25mm in a inch, if its + offset then add to backspacing, -offset subtract.
best way to figure out back spacing: take width of wheel and add .5 inch. divide by 2. that is the center of the wheel (0 offset or for a 8" wheel 4.25 backspacing). Then remember there is about 25mm in a inch, if its + offset then add to backspacing, -offset subtract.
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
- Dirtheadz
- Official CCB Member

- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm