Bunch of parts

[Justin]

I've parted out a bunch of the stuff from my axle post and found more that needs to fund more upgrades. I'll be at the breakfast this weekend.

-ALL SOLD Factory axles in EB width. Fronts are for Dana 44, and are in good shape with recent u-joints. Rears are 28 spline big bearing from a 76-77 EB, probably need new bearings which I'm willing to press on if you buy the bearings. $50 for the rear pair, ALL SOLD. Might consider offers on the rears, but I might turn them into something creative, too.

-SOLD Dana 44 housing with WH trac bar bracket welded on. SOLD.

-SOLD Battlement Fabrication adjustable coil buckets and shock mounts. These are really, really sweet, and I'd run'em if I wasn't planning a slightly different plan. Ballistic sells similar ones in kit form for $100 each or $183 for the set plus shipping. These are welded up by Battlement and ready to go. I'll consider splitting if I have a buyer for both the buckets and mounts. If you want'em please speak up as they're going on CO4x4, CB.com, Pirate and craigslist in a couple of days. SOLD

-SOLD James Duff 3.5" lift progressive rate springs. I've been really happy with them as they ride quite well. Other than needing a cleaning they're in great shape. $SOLD

-1.5" 1/4" wall DOM tube. I need to do some measuring, but have at least enough spare for 1 DOM tie rod/drag link combo, possibly 2. I also have the ability to bend it into a custom track bar and could potentially deliver what you want as a complete kit with bungs welded and ready to install. Shoot me a PM with what you're interested in and we can talk price.

-A set of stock radius arms with coil buckets and caps. Someone out there has to want a set of Lars Bars extended radius arms. http://www.norcalbroncos.com/forum/show ... =lars+bars $50

[Viperwolf1]

Just a quick note: Rear axles have a specific brake offset. Might want to include brake size in the description so there are no surprizes.

[Justin]

I don't know exactly what they came off of, as it wasn't my rig. I'm happy to post the info up, what measurements do I need to take? Thanks for the heads up!

[Justin]

Front axles are sold. Will consider offers on the rears. I'm also willing to turn them into sweet custom stands for tools, see my grinder stand about halfway down. viewtopic.php?f=4&t=5636

[Viperwolf1]

I don't know exactly what they came off of, as it wasn't my rig. I'm happy to post the info up, what measurements do I need to take? Thanks for the heads up!

On this chart it's called brake back spacing. It should be the distance from the WMS to the inside of the retainer surface.

Axle%20Chart.jpg

[Justin]

Thanks, they're from a 76-77 big bearing housing based on the backspacing. Total length measurements are from the axle face, correct?

[Justin]

D44 housing is sold.

[aaah1]

Pm sent

[Viperwolf1]

Thanks, they're from a 76-77 big bearing housing based on the backspacing. Total length measurements are from the axle face, correct?

Yes. Those would require the 11" x 2 1/2" brakes.

[Justin]

Coil buckets and shock towers are sold.

[Justin]

Springs and rear axles are sold. C'mon, someone want some radius arms...I'll take offers!