Gregg wrote:EFI Guy wrote:Any updates?
X2
x3
My 76' Work in Progress
-
Gregg
- Official CCB Member
- Posts: 1060
- Joined: Sun Nov 07, 2010 10:08 am
-
Moab Mike
- Official CCB Member
- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: My 76' Work in Progress
Work continues to plague my bronco work efforts. Had to work at midnight yesterday til 10AM due to someone else's lack of foresight. I just can't seem to get time to pull it off. At this point maybe I'm bringing it and maybe I'm not.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
-
Moab Mike
- Official CCB Member
- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: My 76' Work in Progress
76fordbronco wrote:Work continues to plague my bronco work efforts. Had to work at midnight yesterday til 10AM due to someone else's lack of foresight. I just can't seem to get time to pull it off. At this point maybe I'm bringing it and maybe I'm not.
Sent from my iPhone using Tapatalk
You need to make sure to use EFI Guys setup! When it was running, it sounds awesome. I did have to shorten the coil pack mount by sectioning about an inch out of it to fit under the factory hood. In still don't know if it will fit but I definitely wouldn't fit before.
Sent from my iPhone using Tapatalk
-
Gunnibronco
- Official CCB Member
- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: My 76' Work in Progress
Good luck Mike.
Work hindered my Bronco efforts in March. I've been doing overtime on my rig in April, and still worried (and kind of burnt out). The truck will be ready, but I might show up in Moab without camping gear, food or a change of clothes. I might not have the time to actually pack for the trip. LOL.
Work hindered my Bronco efforts in March. I've been doing overtime on my rig in April, and still worried (and kind of burnt out). The truck will be ready, but I might show up in Moab without camping gear, food or a change of clothes. I might not have the time to actually pack for the trip. LOL.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
landshark
- Official CCB Member
- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
Re: My 76' Work in Progress
bring it to Moab, we can finish it there!
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
-
Gregg
- Official CCB Member
- Posts: 1060
- Joined: Sun Nov 07, 2010 10:08 am
Re: My 76' Work in Progress
Mike, his neighbor, Rox, and I worked out some more kinks and resulted I the following:
The wind goofed up some of the sound...at the beginning.
http://youtu.be/I6to2owCF94
That's one happy dude.
The wind goofed up some of the sound...at the beginning.
http://youtu.be/I6to2owCF94
That's one happy dude.
Definition of cool.
-
BNC04
- Official CCB Member
- Posts: 350
- Joined: Thu Jan 27, 2011 12:01 pm
Re: My 76' Work in Progress
Good work guys !!!
75 D44/ARB/Disc PS. 86 5.0 Carbed- NP-435 yukon rear. 4.11 3.5 Susp lift Rampage top
-
Gunnibronco
- Official CCB Member
- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: My 76' Work in Progress
Mike's smile at the end was priceless!!!!!!!
See you Tuesday!
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: My 76' Work in Progress
Sweet!
-
Eck
- Official CCB Member
- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: My 76' Work in Progress
Nice work!
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
Entourage
- Official CCB Member
- Posts: 3275
- Joined: Wed Sep 29, 2010 4:45 pm
Re: My 76' Work in Progress
Looks and sounds great.
"I truly believe that good will outweigh evil, but there won't be peace on earth until the power of love overcomes the love of power" - Jimi Hendrix
-
Moab Mike
- Official CCB Member
- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: My 76' Work in Progress
Thanks to my neighbor Robert, Gregg and Rox Crusher the engine roared to life and looks like I can cruise Moab in style! You can definitely tell there's a few more pony's under the hood.
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: My 76' Work in Progress
That video doesn't do the motor justice !
It was roaring like a race car.
It was roaring like a race car.
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Kinder
- Official CCB Member
- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
-
B.O.B.
- Official CCB Member
- Posts: 777
- Joined: Thu Nov 11, 2010 9:31 am
Re: My 76' Work in Progress
Sounds fabulous . Great work.
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
-
Digger
- Official CCB Member
- Posts: 1282
- Joined: Fri Jun 21, 2013 7:53 pm
Re: My 76' Work in Progress
Looks and sounds great!!
Cummins R2.8 diesel, ZF5, AtlasII, HP44/BB9, ARBs, coiled / linked suspension, 37" KO2s, full cage, bumpers, etc.
Build Thread: http://www.coloradoclassicbroncos.com/viewtopic.php?f=3&t=5420
Average 23.5 mpg, Best tank: 26.3 mpg
Build Thread: http://www.coloradoclassicbroncos.com/viewtopic.php?f=3&t=5420
Average 23.5 mpg, Best tank: 26.3 mpg
-
ZOSO
- Moderator
- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: My 76' Work in Progress
Sounds better in person. Sweet deal. cant wait to see it cruising moab tuesday.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
-
B.O.B.
- Official CCB Member
- Posts: 777
- Joined: Thu Nov 11, 2010 9:31 am
Re: My 76' Work in Progress
I noticed you have a fuel pressure gauge on your rail. Where did you get it?
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
-
Moab Mike
- Official CCB Member
- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: My 76' Work in Progress
B.O.B. wrote:I noticed you have a fuel pressure gauge on your rail. Where did you get it?
I got it from eBay and it came with the 1/16" male to 1/8" female adapter. I also bought a 1/8" 45 degree male/female fitting from Ace Hardware to angle the gauge towards the front. I posted a link to one of the gauges.
O'Reily's sells them too for about twice the price.
http://www.ebay.com/itm/FORD-5-0-MUSTAN ... a1&vxp=mtr