June Breakfast-REVISED

A place to coordinate Meet and Greets, Trail Runs, BBQs, etc. Please move your event to the Trip Reports forum once complete, or as a Moderator to do so.
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: June Breakfast-REVISED

Post by Colorado75bronc »

I've got one, it's a HF but works just fine, I'll bring it by this week when u bring the hood and I'll bring my electric corded drill for you to borrow


Sent from my iPhone using Tapatalk
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: June Breakfast-REVISED

Post by akaFrankCastle »

Colorado75bronc wrote:I'll bring it by this week when u bring the hood...


Huh?
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: June Breakfast-REVISED

Post by hockeydad4-22 »

Drills I got, spot weld cutter bits... Nope
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
MoneyPit
Official CCB Member
Official CCB Member
Posts: 69
Joined: Thu Jul 28, 2011 7:39 am

Re: June Breakfast-REVISED

Post by MoneyPit »

I won't be able to make this one. Leaving Thursday to go to Portland to visit the grandkids. Have fun!
Doug
User avatar
Colorado75bronc
Official CCB Member
Official CCB Member
Posts: 996
Joined: Fri Oct 22, 2010 6:13 pm

Re: June Breakfast-REVISED

Post by Colorado75bronc »

I meant when I bring the hood, sorry I'm a dumb-dumb sometimes


Sent from my iPhone using Tapatalk
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: June Breakfast-REVISED

Post by hockeydad4-22 »

Drills I'm bringing. May be bringing one or two sons too (never count on that these days)

Anything else I can bring? Food? Beverages? Tools?
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: June Breakfast-REVISED

Post by akaFrankCastle »

We'll do Monica's for burritos at breakfast. If things run long, Jimmy Johns for lunch?

2-3 corded drills should do us right. I have a fresh can of PBlaster for stubborn fender bolts. Home Depot is .38 miles for hardware.

We could use a set of transfer/transmission crossmember uprights.

Aside from that, I think we're good to go.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Kinder
Official CCB Member
Official CCB Member
Posts: 4372
Joined: Wed Sep 29, 2010 9:03 pm

Re: June Breakfast-REVISED

Post by Kinder »

My schedule has changed, not going to make it now, I'm dropping off parts to Hockeydad for delivery.
Best to Date MPG: 26.6
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: June Breakfast-REVISED

Post by akaFrankCastle »

So, it's going to be Hockeydad, Friday and me? I guess it wasn't the drive to Denver keeping the southern folks from showing up after all.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Kinder
Official CCB Member
Official CCB Member
Posts: 4372
Joined: Wed Sep 29, 2010 9:03 pm

Re: June Breakfast-REVISED

Post by Kinder »

I believe TFB is still heading down, he's worth two of me when it comes to free labor, but of course you have to feed him. lmao
Best to Date MPG: 26.6
User avatar
427wrangler
Official CCB Member
Official CCB Member
Posts: 61
Joined: Sat Nov 03, 2012 6:36 am

Re: June Breakfast-REVISED

Post by 427wrangler »

I was supposed to do something with my wife tomorrow for her birthday but now she has changed the plan, so if it's not to late I will come by for a while.
User avatar
Woodscaper
Official CCB Member
Official CCB Member
Posts: 587
Joined: Fri Nov 19, 2010 10:16 pm

Re: June Breakfast-REVISED

Post by Woodscaper »

akaFrankCastle wrote:I guess it wasn't the drive to Denver keeping the southern folks from showing up after all.

Don't hold it against me Zach, softball (i coach my daughters team) is over mid July and I want to pitch in on this club project. Besides, I have some parts I hope to donate.
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: June Breakfast-REVISED

Post by akaFrankCastle »

Image

Image

Image

Image

Image
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
Gunnibronco
Official CCB Member
Official CCB Member
Posts: 4077
Joined: Mon Jan 03, 2011 5:07 pm

Re: June Breakfast-REVISED

Post by Gunnibronco »

Man I wish I could have been there.

I finished putting down 1000 square feet of R30 fiberglass insulation.

Man I wish I could have been THERE.
You do not have the required permissions to view the files attached to this post.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
User avatar
EFI Guy
VENDOR
VENDOR
Posts: 443
Joined: Sun Dec 15, 2013 7:22 pm

Re: June Breakfast-REVISED

Post by EFI Guy »

Nice work guys. I guess I should get of my arse and get a harness built for it huh?

I would have loved to have made it, just too much going on to prep for the races tomorrow.
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: June Breakfast-REVISED

Post by akaFrankCastle »

EFI Guy wrote:Nice work guys. I guess I should get of my arse and get a harness built for it huh?

I would have loved to have made it, just too much going on to prep for the races tomorrow.


Greg has a garbage bag full of wiring harness for you. icon biggin

Let me know if any of the circuits need to be replaced and I'll hit the yard down here.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
hockeydad4-22
Official CCB Member
Official CCB Member
Posts: 2378
Joined: Tue Nov 02, 2010 12:11 pm

Re: June Breakfast-REVISED

Post by hockeydad4-22 »

More pics

Image
Image
Image

And even after a whole box of really good Breakfast burritos, a certain blue and orange bronco was spotted in the drive through at the burger joint nearby on the way home.... Anyone recognize this rig?

Image

Oh, by the way, your passenger tail light is out....

icon biggin
[color=#BFFF40]Greg

If you are the smartest person in the room -
You are in the wrong room
Post Reply