September Breakfast and Pull 'n' Pay run
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
September Breakfast and Pull 'n' Pay run
Where: Rudy's in CO Springs-315 South 31st Street Colorado Springs, CO 80904. Zac claims that BBQ makes fine breakfast food. Really, it's meat cooked with fire, so how could it be bad?
When: 9/20/14 @ 9a.
How: In your Bronco, of course. Or you can bring something less cool and we'll only mock you a little.
Why: Because Early Broncos are the best vehicles ever made, way more cool than those sucktastic Jeeps. So we should all hang out.
This fine dining experience will be followed by a chance to bruise our knuckles and communally swear at the CO Springs U Pull 'n' Pay. There is a dirty rumor going around that they've got a bunch of Explorers and we all know that an unstripped 5.0 is Not Okay. 3745 S. U.S. Highway 85-87, Colorado Springs, CO 80906.
Hope you all can make it!
When: 9/20/14 @ 9a.
How: In your Bronco, of course. Or you can bring something less cool and we'll only mock you a little.
Why: Because Early Broncos are the best vehicles ever made, way more cool than those sucktastic Jeeps. So we should all hang out.
This fine dining experience will be followed by a chance to bruise our knuckles and communally swear at the CO Springs U Pull 'n' Pay. There is a dirty rumor going around that they've got a bunch of Explorers and we all know that an unstripped 5.0 is Not Okay. 3745 S. U.S. Highway 85-87, Colorado Springs, CO 80906.
Hope you all can make it!
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: September Breakfast and Pull 'n' Pay run
Looks good.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: September Breakfast and Pull 'n' Pay run

Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- hockeydad4-22
- Official CCB Member

- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
Re: September Breakfast and Pull 'n' Pay run
This one I would love to make (been hearing about Rudy's and these legendary C. springs PNPs long enough.
And I will be there if I happen to fill my elk tag early this season. Otherwise, it looks like the legend will just have to live on....
And I will be there if I happen to fill my elk tag early this season. Otherwise, it looks like the legend will just have to live on....
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: September Breakfast and Pull 'n' Pay run
I plan to make it to this one!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: September Breakfast and Pull 'n' Pay run
I'm going to make this one. We have nothing on the calendar for that day.
Mark.
Mark.
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: September Breakfast and Pull 'n' Pay run
I'll be there! Need me a 1998 explorer harness.
-
75DBE
- Official CCB Member

- Posts: 319
- Joined: Sat Jul 16, 2011 7:37 am
Re: September Breakfast and Pull 'n' Pay run
I expect to be able to make this one too...
Maybe I come away with a 351 as the basis for my next engine!
Woo hoo!
Maybe I come away with a 351 as the basis for my next engine!
Woo hoo!
Now with disk brakes, has turned into my sons daily driver while he is home on Christmas break.
- Eck
- Official CCB Member

- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: September Breakfast and Pull 'n' Pay run
I plan to be there too.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
- landshark
- Official CCB Member

- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
Re: September Breakfast and Pull 'n' Pay run
I should be able to make this one, been a while since I have been to the Pull in pay so should be fun.
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
- Dirtheadz
- Official CCB Member

- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
Re: September Breakfast and Pull 'n' Pay run
Count me in
!!! Being original is a blueprint for followers !!!
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: September Breakfast and Pull 'n' Pay run
Updated with the new and improved time: 9:00a at Rudy's (with a side of bacon). Hope to see lots of you there!
- EFI Guy
- VENDOR

- Posts: 443
- Joined: Sun Dec 15, 2013 7:22 pm
Re: September Breakfast and Pull 'n' Pay run
I'm a definite maybe.
I need some 98 Harnesses real bad, making it out of bed in time to make the drive seems like a helluva challenge though.
I need some 98 Harnesses real bad, making it out of bed in time to make the drive seems like a helluva challenge though.
- Eck
- Official CCB Member

- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: September Breakfast and Pull 'n' Pay run
Not gonna make it. CU scheduled their game for noon so no chance for me to do C Springs then Boulder by then.
I do need an Explorer MAF and air box. If anyone sees one and would be so kind to grab it, I'll pay you for your efforts. Prefer the six wire MAF.
I do need an Explorer MAF and air box. If anyone sees one and would be so kind to grab it, I'll pay you for your efforts. Prefer the six wire MAF.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: September Breakfast and Pull 'n' Pay run
How can you pass up some Rudi's Breakfast tacos? I'll be there!!!
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: September Breakfast and Pull 'n' Pay run
EFI Guy wrote:I'm a definite maybe.
I need some 98 Harnesses real bad, making it out of bed in time to make the drive seems like a helluva challenge though.
You're welcome to skip breakfast and meet us at the yard. Or I can loan you a small child for the night and you can wake up at 7.
- Gunnibronco
- Official CCB Member

- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: September Breakfast and Pull 'n' Pay run
I'll be there, looking forward to going to a yard for the first time in a few years.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
- ManTruck
- Official CCB Member

- Posts: 200
- Joined: Tue Oct 12, 2010 7:47 am
Re: September Breakfast and Pull 'n' Pay run
I'm planning on being there and look forward to it.
Owned my 1972 since 1985
Canon City, Co
Canon City, Co
- TOOLMAN
- Official CCB Member

- Posts: 768
- Joined: Mon Feb 14, 2011 9:29 am
Re: September Breakfast and Pull 'n' Pay run
I think I might make this one...see you there!
Wilma - 71 1/2 Wagon; 3 1/2" WH lift, 1" BL, NP435, Chebby disc front, WH twin stick D20, EFI 302, Cool hood scoop, mucho cancer; purchased in 1990.
- Gunnibronco
- Official CCB Member

- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: September Breakfast and Pull 'n' Pay run
I just set up an appointment @ Phil Long Ford in the Springs for them to perform a recall on my F250. I told them I would drop it off around 8am when they open. Could someone pick me up at Phil Long & take me to breakfast & back. It would be greatly appreciated. There is no Ford dealership here, this is my first chance to get this taken care of.
Thanks
Thanks
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: September Breakfast and Pull 'n' Pay run
I'll pick you up Chad. If we wrap up at the salvage yard, you can mow my yard while we wait.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- Gunnibronco
- Official CCB Member

- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: September Breakfast and Pull 'n' Pay run
Awesome, thanks.
I'm, um, allergic to cut grass, yeah, allergic.
I'm, um, allergic to cut grass, yeah, allergic.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: September Breakfast and Pull 'n' Pay run
Gunnibronco wrote:Awesome, thanks.
I'm, um, allergic to cut grass, yeah, allergic.
I'll bet TO needs a good wash and wax!

- EFI Guy
- VENDOR

- Posts: 443
- Joined: Sun Dec 15, 2013 7:22 pm
Re: September Breakfast and Pull 'n' Pay run
Looks like I'm in. Not sure I'll be there on time but I'll be there.
Chad, I'll bring your PCM with me, looking forward to meeting you.
Chad, I'll bring your PCM with me, looking forward to meeting you.
- Gunnibronco
- Official CCB Member

- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: September Breakfast and Pull 'n' Pay run
Great, looking forward to meeting you too. Thanks for all your help!
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
- BoxerDad
- Posts: 15
- Joined: Sat Jan 28, 2012 2:39 pm
Re: September Breakfast and Pull 'n' Pay run
Anyone heading to this event from Denver area? I am looking for someone to grab a few small parts from a fellow CCBer who will be attending. Please PM me if you can help me out.
- hockeydad4-22
- Official CCB Member

- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
Re: September Breakfast and Pull 'n' Pay run
Same here - I actually have a hockey stick that needs to go from Highlands Ranch to a member in the springs who will be at this breakfast.
(see Zach - I do all I can to increase local attendance at the springs gatherings)
(see Zach - I do all I can to increase local attendance at the springs gatherings)
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: September Breakfast and Pull 'n' Pay run
I won't be able to make it, I meant to post up earlier, I forgot that we had planned a camping trip this weekend. I should be able to make it to the next for sure!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
- landshark
- Official CCB Member

- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
Re: September Breakfast and Pull 'n' Pay run
I'm planning on going headed down sat early. Probably won't make the pull n pay but we will see. Need to work on my junk
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
- casadejohnson
- Official CCB Member

- Posts: 708
- Joined: Tue Oct 05, 2010 8:30 pm
Re: September Breakfast and Pull 'n' Pay run
I'm not going to make this one. I love to check out new junkyards but I have my dad in town for my grandfathers 95th birthday. Also my truck is still broken and I can only fit small pile of parts in the back of the 66.