Lar's Bar's Build

[JGZ]

I'm in for a pair,possibly two.

[Kinder]

I'm in for 2 sets likely, my Duff arms need new joints so let me confirm the specs.

BTW Hinton has 2x.25 DOM for $11 per foot, they have one stick in stock right now and can get another one locally if needed. If we buy the whole stick we should be able to get a bit better price. I believe the stick is 18-20 foot long.

[landshark]

I'm in for a 2 set also for my duff arms to replace my cranky joints even though they are 6 months old. Not sure what size I need.

[Kinder]

Just talked to Duff, the rod ends are 1" x 1.25", both are right hand threads, I'll need to see what the bolt size is that goes through it, it's BIG. I'll also need to check the TPI on where they thread into the arm.

http://www.dufftuff.com/1_x_1_25_Diamet ... p/8700.htm

Digger, I don't know if Chris and I are the only folks needing these, but if we are then it'd be nice to put them in with the overall order.

Anyone else running Duff long arms need new ends?

Edit: I also need to measure the ID of the mounting bracket.

[Justin]

$10 says that you're running a 1" bolt (same as Gunni's), and that the threads as 12tpi.

[landshark]

Just talked to Duff, the rod ends are 1" x 1.25", both are right hand threads, I'll need to see what the bolt size is that goes through it, it's BIG. I'll also need to check the TPI on where they thread into the arm.

http://www.dufftuff.com/1_x_1_25_Diamet ... p/8700.htm

Digger, I don't know if Chris and I are the only folks needing these, but if we are then it'd be nice to put them in with the overall order.

Anyone else running Duff long arms need new ends?

Edit: I also need to measure the ID of the mounting bracket.

ya its a biggie...

[ZOSO]

Bump up.

Justin, did you check with any suppliers for brackets? what about a bundle deal with brackets and threaded bungs to weld into the pipe? How about any other prices on DOM?

[Justin]

Nope, not yet. Who would want in on brackets and bungs? I can check about DOM as well. Might get a good deal if shipping isn't too bad.

[Eck]

I'm interested in building a set and would need everything. My problem is I need to also find a set of radius arms. I don't want to de-mobilize my Bronco during the build stage. Anyone have an extra set for sale?

[ZOSO]

I'm interested in building a set and would need everything. My problem is I need to also find a set of radius arms. I don't want to de-mobilize my Bronco during the build stage. Anyone have an extra set for sale?

Im in the same boat. But there will be plenty for sale after the build day and install. Im gonna buy the ones from Justin and build them. Then once I get those put on I can sell my stock ones.

[ZOSO]

Nope, not yet. Who would want in on brackets and bungs? I can check about DOM as well. Might get a good deal if shipping isn't too bad.

I'd need it all.

[hockeydad4-22]

Nope, not yet. Who would want in on brackets and bungs? I can check about DOM as well. Might get a good deal if shipping isn't too bad.

I need all the above - might spring for enough to make 2 sets depending on cost.

[akaFrankCastle]

I'm interested in building a set and would need everything. My problem is I need to also find a set of radius arms. I don't want to de-mobilize my Bronco during the build stage. Anyone have an extra set for sale?

I've got a set you can build off of. I just need your's once you've completed the install.

[Eck]

I'm interested in building a set and would need everything. My problem is I need to also find a set of radius arms. I don't want to de-mobilize my Bronco during the build stage. Anyone have an extra set for sale?

I've got a set you can build off of. I just need your's once you've completed the install.

Awesome. Thanks. sending PM!

[Justin]

OK, so we've got 2 potential group buys:

1.25" joints:
1. Eck
2. Hockeydad (maybe 2)
3. ZOSO
4. Justin
5. Kinder (likely 2)
6. JGZ (maybe 2)

Brackets 'n' bungs:
1. Justin (brackets only)
2. Eck
3. Hockeydad (maybe 2)
4. ZOSO
5. Kinder?
6. JGZ?

Who have I missed? I'll have time Friday to call around and see who will give us the best deal. I really like Ballistic's brackets, but Artec and Ruffstuff are possibilities as well. Feel free to chime in if you've got a preference.

[JGZ]

Do we have a final design figured out?
I'll be in for both buys X2.

[Kinder]

I believe I have brackets that will work, but I'll need bungs.

[Rox Crusher]

Depending on pricing..........I might join in both.

[ZOSO]

Depending on pricing..........I might join in both.

If I had to guess I'd say they'll be in the $350 range or less. depends on the final discounts if we get any.

[Justin]

The brackets run about $45 per pair, and most vendors will automatically give a 10-15% discount just for asking. I'm guessing we'll get better by ordering multiples of stuff.

[ZOSO]

Depending on pricing..........I might join in both.

with no discounts on xaxis joints or brackets or tubing I figuered it right around $300 in material if you already have a set of radius arms.

[Justin]

The updated group buy list:

1.25" joints:
1. Eck
2. Hockeydad (maybe 2)
3. ZOSO
4. Justin-2 for sure, maybe 6
5. Kinder (likely 2)
6. JGZ-2
7. Rox Crusher-maybe

Brackets 'n' bungs:
1. Justin (brackets for sure, possibly 2 sets of brackets and 4 bungs)
2. Eck
3. Hockeydad (maybe 2)
4. ZOSO
5. Kinder-bungs only
6. JGZ-2
7. Rox Crusher-maybe

Additions? I'd like to call Friday for pricing, so please post up!

[ZOSO]

does landshark want to replace the heims on his duff arms?

[Kinder]

does landshark want to replace the heims on his duff arms?

I know I do, they're toast. I'll finish getting measurements after Santa shows up.

[kbank6]

OK, so we've got 2 potential group buys:

1.25" joints:
1. Eck
2. Hockeydad (maybe 2)
3. ZOSO
4. Justin
5. Kinder (likely 2)
6. JGZ (maybe 2)

Brackets 'n' bungs:
1. Justin (brackets only)
2. Eck
3. Hockeydad (maybe 2)
4. ZOSO
5. Kinder?
6. JGZ?

Who have I missed? I'll have time Friday to call around and see who will give us the best deal. I really like Ballistic's brackets, but Artec and Ruffstuff are possibilities as well. Feel free to chime in if you've got a preference.

Add me to the list.

[Justin]

One set of each?

[landshark]

Yes wanted to try different joints

[casadejohnson]

I'm just getting up to speed on this thread. I'm in on the long arm build for sure. I already have a spare set of arms to build. If the price is right, I may do a set for the boys bronco as well. For those who want to build a set of arms but do not want to have the bronco on jack stands during the build , we could make a junkyard run and molest a few F150's for donor arms.

[Justin]

I'd like to make a junkyard run for explorer stuff anyway. Let's set a date?

[kbank6]

One set of each?

Yes..