Official Bronco Sighting Thread
- Error404
- Official CCB Member

- Posts: 92
- Joined: Fri Aug 16, 2013 7:33 am
Re: Official Bronco Sighting Thread
Is it really!? Never knew that I thought the address said Elizabeth... Didn't see signage either just BKG unless it's 2 different shops?? I'll have to check it out next time I'm at the shop.
Edit..
Did they move? I just checked their site and sure enough its atchison ct. Castle rock.
Edit..
Did they move? I just checked their site and sure enough its atchison ct. Castle rock.
1996 bronco 4bt sas .
1972 bronco 10k mi no motor no trans..unfortunately rolled in 1973. Left for me to bring back from the dead.
1972 bronco 10k mi no motor no trans..unfortunately rolled in 1973. Left for me to bring back from the dead.
- Rox Crusher
- Official CCB Member

- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: Official Bronco Sighting Thread
Error404 wrote:Is it really!? Never knew that I thought the address said Elizabeth... Didn't see signage either just BKG unless it's 2 different shops?? I'll have to check it out next time I'm at the shop.
Edit..
Did they move? I just checked their site and sure enough its atchison ct. Castle rock.
they moved into that new shop about 2 years ago
most of their Broncos are still out back of their house
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Official Bronco Sighting Thread
Pea green uncut black wheels white top don't tread on me sticker. Nb 25 now passing Fillmore.
Might have been OD green. No fender badges or markers.
Might have been OD green. No fender badges or markers.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: Official Bronco Sighting Thread
We fixed a leak on this one for fat boys auto. It had a
wishbone coil suspension under it. I dropped a card in it
wishbone coil suspension under it. I dropped a card in it You do not have the required permissions to view the files attached to this post.
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Official Bronco Sighting Thread
That is
. Wow.
. Wow.- Kinder
- Official CCB Member

- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
Re: Official Bronco Sighting Thread
What the what. That looks like a kit or something, u bolts are holding the arms onto the housing & integrates the track bar.
Best to Date MPG: 26.6
- landshark
- Official CCB Member

- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
Re: Official Bronco Sighting Thread
whoa whoa wha???
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Official Bronco Sighting Thread
Yeah it was weird, I wasn't much of a fan, the crossmember/ pivot point was a few inches from the tcase making it setup so that it would have to be removed to R'n'R the trans or tcase. So during disassembly nothing would be there to locate the axle fore and aft
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Official Bronco Sighting Thread
I've seen something similar on a build thread for an AK4x4 site. Very odd. But I think this build actually had a trailer coupler and a ball welded to the frame.
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
- Kinder
- Official CCB Member

- Posts: 4372
- Joined: Wed Sep 29, 2010 9:03 pm
Re: Official Bronco Sighting Thread
Nice rig in the parking lot at the park.
You do not have the required permissions to view the files attached to this post.
Best to Date MPG: 26.6
- Eck
- Official CCB Member

- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: Official Bronco Sighting Thread
Went on a little Arvada/Wheat Ridge Christmas light drive tonight and low and behold the very first house I pulled up to was absolutely perfect!!!




69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
- D&D72
- Official CCB Member

- Posts: 989
- Joined: Sun Sep 11, 2011 9:49 pm
Re: Official Bronco Sighting Thread
Near my parents in Ft Lupton
You do not have the required permissions to view the files attached to this post.
That guy John.... whatta Jerk.
- Error404
- Official CCB Member

- Posts: 92
- Joined: Fri Aug 16, 2013 7:33 am
Re: Official Bronco Sighting Thread
1996 bronco 4bt sas .
1972 bronco 10k mi no motor no trans..unfortunately rolled in 1973. Left for me to bring back from the dead.
1972 bronco 10k mi no motor no trans..unfortunately rolled in 1973. Left for me to bring back from the dead.
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: Official Bronco Sighting Thread
Looks like you were hiding in the bushes.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
- Error404
- Official CCB Member

- Posts: 92
- Joined: Fri Aug 16, 2013 7:33 am
Re: Official Bronco Sighting Thread
Sometimes you have to sneak up on broncos in the wild...
1996 bronco 4bt sas .
1972 bronco 10k mi no motor no trans..unfortunately rolled in 1973. Left for me to bring back from the dead.
1972 bronco 10k mi no motor no trans..unfortunately rolled in 1973. Left for me to bring back from the dead.
- Gregg
- Official CCB Member

- Posts: 1060
- Joined: Sun Nov 07, 2010 10:08 am
Re: Official Bronco Sighting Thread
My wife flagged down a 1/2 cab and told them to come talk to me. Couple hours later this was outside my house. It was missing a big red bow. Maybe next Christmas.
Either way I met a father / son new to the EB world. They picked up this good looking rig in Canon City. They knew about CB.com but we're excited to learn about CCB.com. I told them about the breakfasts, builds, and trips. I left out the people part because, well, you know...
I bet they are already in the process of joining. Don't tell them Im NOT the treasurer and there's a $20 membership fee. Shhhhhhhhh...
Either way I met a father / son new to the EB world. They picked up this good looking rig in Canon City. They knew about CB.com but we're excited to learn about CCB.com. I told them about the breakfasts, builds, and trips. I left out the people part because, well, you know...
I bet they are already in the process of joining. Don't tell them Im NOT the treasurer and there's a $20 membership fee. Shhhhhhhhh...
You do not have the required permissions to view the files attached to this post.
Definition of cool.
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Official Bronco Sighting Thread
Good wife!
- Happydog9
- Official CCB Member

- Posts: 3
- Joined: Sun Jan 18, 2015 8:36 pm
Re: Official Bronco Sighting Thread
Gregg wrote:My wife flagged down a 1/2 cab and told them to come talk to me. Couple hours later this was outside my house. It was missing a big red bow. Maybe next Christmas.
Either way I met a father / son new to the EB world. They picked up this good looking rig in Canon City. They knew about CB.com but we're excited to learn about CCB.com. I told them about the breakfasts, builds, and trips. I left out the people part because, well, you know...
I bet they are already in the process of joining. Don't tell them Im NOT the treasurer and there's a $20 membership fee. Shhhhhhhhh...
Haha! It was great meeting you. Thanks for all the info!
- hockeydad4-22
- Official CCB Member

- Posts: 2378
- Joined: Tue Nov 02, 2010 12:11 pm
Re: Official Bronco Sighting Thread
Happydog9 wrote:Gregg wrote:My wife flagged down a 1/2 cab and told them to come talk to me. Couple hours later this was outside my house. It was missing a big red bow. Maybe next Christmas.
Either way I met a father / son new to the EB world. They picked up this good looking rig in Canon City. They knew about CB.com but we're excited to learn about CCB.com. I told them about the breakfasts, builds, and trips. I left out the people part because, well, you know...
I bet they are already in the process of joining. Don't tell them Im NOT the treasurer and there's a $20 membership fee. Shhhhhhhhh...
Haha! It was great meeting you. Thanks for all the info!
Were just disappointed you had to meet Shawn in order to get here. In fact - I suppose we should apologize for subjecting you to that disappointment. Every once in a while he gets out (escapes really - but we try to keep that quiet)
Really most of us are much better people. Of course that is not saying much.
[color=#BFFF40]Greg
If you are the smartest person in the room -
You are in the wrong room
If you are the smartest person in the room -
You are in the wrong room
-
NeonGreen70
- Official CCB Member

- Posts: 29
- Joined: Sun Jun 29, 2014 2:06 pm
Re: Official Bronco Sighting Thread
The wife and I went to Barrett Jackson in Scottsdale this past weekend. Amazing display of cars and trucks. There were about 10 Broncos for sale. Most sold between about $20 K to $40 K. Real beauties. Attached are a few pics.
You do not have the required permissions to view the files attached to this post.
- Jesus_man
- Official CCB Member

- Posts: 5988
- Joined: Thu Nov 11, 2010 9:36 am
Re: Official Bronco Sighting Thread
Wow, some nice rigs! That auction is something I'd like to attend someday. That is an interesting way to do an exo on the bottom pic. Wonder if that would hold up in the real world as that is where the majority of body damage is on mine. I have a feeling it'd collapse, at least on the rear.
But looks like they drove that rig quite a bit seeing the tire wear difference front to back.
They all say "SOLD". Is one of those your new addition??
But looks like they drove that rig quite a bit seeing the tire wear difference front to back.
They all say "SOLD". Is one of those your new addition??
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
http://www.ucora.org
-
NeonGreen70
- Official CCB Member

- Posts: 29
- Joined: Sun Jun 29, 2014 2:06 pm
Re: Official Bronco Sighting Thread
There are a number of auctions in the Scottsdale / Phoenix area that weekend. We attended the Bonhams auction on Friday and got to see them sell Ferraris and Bugattis -- one actually sold for $2.7 M while we were there. Barrett Jackson is just a huge amazing event and should be on every car guy or gals bucket list. Much of the show is indoors -- and they auction off thousands of cars in six days.
No new addition for me. I'll just keep trying to improve the NeonGreen70... Still lots of work to do...
No new addition for me. I'll just keep trying to improve the NeonGreen70... Still lots of work to do...
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: Official Bronco Sighting Thread
Yesterday on C470 at 7:40 AM.
You do not have the required permissions to view the files attached to this post.
- CORed77
- Official CCB Member

- Posts: 57
- Joined: Thu Apr 04, 2013 10:37 pm
Re: Official Bronco Sighting Thread
Has anyone checked out the light blue half cab on Harrison St. off North Nevada? Had some flooring installed by a guy that lives off of Tejon when I spotted this Bronco. Needs work, but foundation looks solid, everything looks original. Flooring guy thinks it is the original owner.
- akaFrankCastle
- Official CCB Member

- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: Official Bronco Sighting Thread
I've stopped in a few times and left notes. Never gotten a call or an answer at the door. Used to be a baseball bat in a gun rack in the back window.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
B.O.B.
- Official CCB Member

- Posts: 777
- Joined: Thu Nov 11, 2010 9:31 am
Re: Official Bronco Sighting Thread
Error404 wrote:Is it really!? Never knew that I thought the address said Elizabeth... Didn't see signage either just BKG unless it's 2 different shops?? I'll have to check it out next time I'm at the shop.
Edit..
Did they move? I just checked their site and sure enough its atchison ct. Castle rock.
The bloody knuckles garage is the motorcycle/atv shop that shares the building
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
- phyler
- CCB Admin
- Posts: 1231
- Joined: Sat Oct 02, 2010 8:41 pm
Re: Official Bronco Sighting Thread
My wife likes to send pictures of Broncos when she's out since I'm not in the car to shout "Bronco". This was off of Hwy 7 in Erie.

She was just leaving our neighborhood.

She was just leaving our neighborhood.
1975 Ranger Edition that I've had longer than I've been without it.
OG
OG
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Official Bronco Sighting Thread
Good wife.
-
DanHall
- Official CCB Member

- Posts: 151
- Joined: Fri Jan 17, 2014 1:38 pm
Re: Official Bronco Sighting Thread
No pictures but I saw two yesterday running errands around Pueblo. The first was a beautiful, red and uncut on Hwy 50 out near the airport. Gave him the
as I passed. The second I only saw for a second or two as it roared past me in town.
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: Official Bronco Sighting Thread
Saw this one at powers and constitution heading north on powers. Blue and white
You do not have the required permissions to view the files attached to this post.
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's

