5.0l 50oz inbalance flywheel, clutch, and pressure plate.

[rooster]

selling a lightly used clutch assembly that came off my bronco, the flywheel is the50oz inbalance for EFI roller motors, I took it off because it was interfering with a rib inside my zf5 speed so I had to swich clutches, it was in an NP435 however and worked great. it is a high performance clutch and grabs really good, clutch disk still has a lot of life left. flywheel teeth are pretty good aswell, will also throw in a used starter. let me know if you might be interested and we can work out a price. THANKS!

[Justin]

I might be interested.

[rooster]

pk sounds good, let mw know if you have any questions

[Dirtheadz]

I'm defiantly interested...

[Justin]

I need to pull my starter and check the teeth on my pressure plate, will let you know. Please feel free to sell if you find another buyer.

[sykanr0ng]

Everything I've seen say the ZF only works well with diaphragm clutches not the three finger old style clutches.
The three fingers don't work right with the hydraulic throw-out bearing.

[rooster]

sold.