Garage Sale

[TOOLMAN]

*New Parts Added*

Here's what I got so far:
Master cylinder for an F250 Camper Special (I think it's a 1 1/4" bore) - new, just bench bled: $20
Set of 10 #19 Orange injectors from a 98 Exploder: $40
Fuel Rail, Fuel Pressure Regulator, and 8 #17 Beige injectors from a 99 Exploder: $40
Plastic Fan for Explorer serp setup (has some small cracking): $15
98 Explorer Valve Covers: $10 SOLD
Proform HEI distributor for SBF(cap, rotor, coil new last year) w/ set of new last spring MSD wires: $75
Duff Chrome transfer case shifter for T-shift w/ shifter boot, good shape: $50
Aftermarket coolant overflow tank: $5
OEM washer fluid reservoir w/ working motor, not cracked: $10
Windshield motor lowering bracket, $15
'98 Exploder 5.0L V8 upper plenum vanity plate: $20
Mechanical fuel pump for 302: $5
OEM 5 blade fan for 302: $10
10" Edelbrock air cleaner w/ K&N filter element: $15
'67 ash tray, red: $10
'71 windshield wiper motor & linkage: $30 SOLD
'67 stock style tailgate supports: $10 SOLD
Old Smittybuilt front bumper w/ ends trimmed off, good for a trail bumper: $25
4 spoke Grant GT steering wheel with adapter to mount to pre-'74 steering column: $25 SOLD
Smooth shift collar for truck switched to floor shift - blue: $40
'71 3 speed column shift tube (comes with shift collar, but collar may not be able to be used): $25
Parchment OEM visors, one small tear in one of them: $30 SOLD
R & L inner fender aprons newish: $50 for pair SOLD
Spark plug wire separators that clip on stock valve covers: $5 for pair SOLD
Edelbrock carb calibration kit #1479; I think it's pretty compete: $40
OEM alternator brackets for 302: $10
Throttle body for '98 Explorer $35
MAF for '98 Explorer: $30 SOLD
Passenger rear window track, new: $20
TBP bikini top with header, newish: $80
OEM Ford oil filler cap w/ PCV valve: $5
Stock rear tank w/ strap, sending unit, skid plate, and limiting brackets; tank doesn't leak, sending unit weeps a little: $40
Stock aux. tank with strap, sending unit, and limiting brackets; no leaks or dents: $50

*Some prices are probably negotiable.

[D&D72]

maybe on the valve covers. got a pic? seems to be quite the variety....

[TOOLMAN]

maybe on the valve covers. got a pic? seems to be quite the variety....

I'll get a picture to you after work. Came off a 98 if I remember correctly. I pulled them just in case, but decided to use the Mustang ones.

[jcb9089]

I'm interested in the metal explorer fan and a fan clutch.

Do you take paypal?

[rooster]

interested in fan clutch and plastic fan, wondering if you still had them? THANKS

[TOOLMAN]

I'm interested in the metal explorer fan and a fan clutch.

Do you take paypal?

Sent you a PM. Yes I do take PayPal. I'll send you that via PM.

[TOOLMAN]

interested in fan clutch and plastic fan, wondering if you still had them? THANKS

Plastic fan still available. I'm going to hold onto my extra clutch. You have dibs on the other clutch if JCB falls through.

[TOOLMAN]

maybe on the valve covers. got a pic? seems to be quite the variety....

Here you go! Sorry it was late, I had problems trying to post through my phone.

[D&D72]

Yah, those are the same as what I have from a 97.

[JimGL]

Interested in the Accel pointless distributor w/coil for SBF.
Please send me a PM with contact information.

Thanks,
Jim

[Kinder]

Can I get some details on the throttle cable, 2bbl, 4bbl, EFI, stock or stainless?
Size of the lights?
Also a pic of the coolant overflow bottle.

[TOOLMAN]

Can I get some details on the throttle cable, 2bbl, 4bbl, EFI, stock or stainless?
Size of the lights?
Also a pic of the coolant overflow bottle.

Kirk,
Throttle cable is black for a 4bbl, see link http://www.bcbroncos.com/store/product_info.php?products_id=123.
I think the lights are 4", could be 100W, if I remember correctly. Got them a while ago.
I can send you a pic of the coolant bottle, but it's basically this: http://www.oreillyauto.com/site/c/detail/INT0/BVR4/N0186.oap?ck=Search_N0186_-1_2658&pt=N0186&ppt=C0331

Let me know if you have any other questions.

[TOOLMAN]

Interested in the Accel pointless distributor w/coil for SBF.
Please send me a PM with contact information.

Thanks,
Jim

PM Sent...

[Justin]

If Kirk doesn't take the throttle cable I'll take it.

[TOOLMAN]

If Kirk doesn't take the throttle cable I'll take it.

10-4. Noted.

[Kinder]

Please set aside the throttle cable & lights for me, I'll pass on the bottle. Did you say you were or weren't going to make it to the build day? If not let me know a good way to grab parts & make payment.

[TOOLMAN]

Please set aside the throttle cable & lights for me, I'll pass on the bottle. Did you say you were or weren't going to make it to the build day? If not let me know a good way to grab parts & make payment.

Sold! Sorry Justin. I'll PM you.

[TOOLMAN]

A few parts added bump...

[Kinder]

Is the wiper linkage setup complete?

[TOOLMAN]

Is the wiper linkage setup complete?

Motor and linkages are complete...nuts and bolts may be a question. Let me check tonight.

[Kinder]

Cool, I don't think the nuts & bolts are special, it's the clips & washers that are hard to find.

[TOOLMAN]

Kirk,

The only nuts/bolts/clips I could find were the two nuts and washers where the shafts come through the windshield. Let me know what you think.

[TOOLMAN]

Parts added bump...

[Woodscaper]

I could use the steering wheel, got a pic?

[TOOLMAN]

I could use the steering wheel, got a pic?

Here's a pic. However, I've got two guys on CB.com that are vying for it. If those two pass, it's yours.

[Psoliver57]

If you still have the wiper lmotor and linkage I want it.

[TOOLMAN]

If you still have the wiper lmotor and linkage I want it.

I do. PM-ed you.

[TOOLMAN]

Items updated...

[TOOLMAN]

Items updated. Make me an offer on any of the remaining parts if you're looking for something. I may post a few things on fleabay.

[Broncoguy73]

Do you still have the fuel rail and #19 injectors?