Back in action. Checked the oil pressure with a mechanical gauge and I'm at 60psi at idle and when revving the engine about 70psi.
The electrical gauge seems to be about 5psi off or so.
Here we go again...
-
Eck
- Official CCB Member
- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: Here we go again...
https://vimeo.com/122665211
Back in action. Checked the oil pressure with a mechanical gauge and I'm at 60psi at idle and when revving the engine about 70psi.
The electrical gauge seems to be about 5psi off or so.
Back in action. Checked the oil pressure with a mechanical gauge and I'm at 60psi at idle and when revving the engine about 70psi.
The electrical gauge seems to be about 5psi off or so.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
horseplay
- Official CCB Member
- Posts: 408
- Joined: Mon Jan 21, 2013 7:24 pm
Re: Here we go again...
Will keep our fingers cross. Moab!!
-
Rox Crusher
- Official CCB Member
- Posts: 3980
- Joined: Sun Oct 10, 2010 4:36 pm
Re: Here we go again...
Snow bashing this Sunday ?
1977 Sport, 351w OBDII EFI motor, 4R70W auto, 4:88 gears, ARB lockers, 3.5" suspension, 33" tires.
-
Viperwolf1
- Official CCB Member
- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
Re: Here we go again...
You should go snow bashing.
-
Eck
- Official CCB Member
- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: Here we go again...
Rox Crusher wrote:Snow bashing this Sunday ?
That's the plan. I'm gonna try to put a few miles on it the next few days and as long as it's still running strong, I'm gonna do it.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
EFI Guy
- VENDOR
- Posts: 443
- Joined: Sun Dec 15, 2013 7:22 pm
Re: Here we go again...
Updates? How's it running?
-
Eck
- Official CCB Member
- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: Here we go again...
I had some issues with my serpentine belt and so just fixed that and drove around the block- seems to be running ok. I plan to drive it more tomorrow.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
Viperwolf1
- Official CCB Member
- Posts: 1485
- Joined: Tue May 07, 2013 9:37 pm
Re: Here we go again...
Go around two or three blocks.
-
Eck
- Official CCB Member
- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: Here we go again...
Viperwolf1 wrote:Go around two or three blocks.
That's what I've been doing wrong!!
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
horseplay
- Official CCB Member
- Posts: 408
- Joined: Mon Jan 21, 2013 7:24 pm
Re: Here we go again...
How did the shack down go?
-
Eck
- Official CCB Member
- Posts: 2462
- Joined: Thu Oct 25, 2012 8:33 pm
Re: Here we go again...
horseplay wrote:How did the shack down go?
There wasn't a shake down run because apparently everyone else got the Eck's. I did put some miles on it around town this weekend and things felt "OK."
Big thanks to Kinder who came by today and plugged my #7 plug wire back in and fixed my issues instantly. Sometimes you can't see the trees through the forest!!
Hoping to get a shake down run sometime soon so I can make a final decision on Moab.
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
-
horseplay
- Official CCB Member
- Posts: 408
- Joined: Mon Jan 21, 2013 7:24 pm
Re: Here we go again...
Congrats hope that's the end of that
-
mickphatmac
- Official CCB Member
- Posts: 1810
- Joined: Fri Mar 16, 2012 9:26 am
Re: Here we go again...
A "Case of the Eck's"!!!!!!!!!!
I hope you don't mind, but I'm using that!
I hope you don't mind, but I'm using that!
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4