Front Disc Brake Hub question...

[mickphatmac]

Hey guys,
What is the difference between the hub/rotor assy. for the '76-86 VS. '95-96?
Can you make them ('95-96) work, or does it have to do with the automatic electric 4x4???/size
Thanks,
Mike

also...on the '89-93 they come with an ABS ring, do you leave that on or tear it off if you use these? are these the same as the early ones?

[Justin]

Wait, there's a year after 1977?

[mickphatmac]

Getting ready to do the Chevy Disc brake swap. (Dana 30 up front) I have both spindles, both caliper mounts.
I need the calipers and Hub/Disc assembly.

Any suggestions on where to get the cheapest ones?

I want to go New as opposed to used.
Thanks

[akaFrankCastle]

I wound up buying calipers at Advance and hubs/rotors at AutoZone.

[Justin]

X2. Parts store is your best bet. Rebuilt is fine.

[mickphatmac]

That's good enough for me, Thanks guys!

[phyler]

The hub /rotor assembly is expensive brand new. I got one from Ed the Ford parts guy for $20 and it had a good rotor on it. All of the hub assemblies through the early 90's have the same part numbers when I checked. Just went through this last fall. New the assemblies were north of $100. Hope that helps. Obviously new is just simple. :)

[Justin]

You might also check with Dalli in the springs.

[mickphatmac]

Awesome, Thanks!