Sprung a leak (fuel, that is)

Get answers to Bronco-related technical issues.
Post Reply
User avatar
phyler
CCB Admin
Posts: 1231
Joined: Sat Oct 02, 2010 8:41 pm

Sprung a leak (fuel, that is)

Post by phyler »

Yeah, not good. I took the Bronco out for a spin when I finished the steering upgrade and when I got back I noticed it dripping something. Looked and it was coming off the fuel pump (stock, mechanical). I thought it was odd cause it was coming from the hard line that goes to the carb and not the rubber line that comes from the fuel tank.

Well, today I started looking around making sure everything was tight and realized it was coming from up above. I have fluid on the top of the engine. So I started up the Bronco and watched to see where it was coming from (spoiler, it wasn't the rubber line from the hard line to the carb). On the front of the carb, there is a little hole right below the accelerator pump and every time you give it gas, fuel squirts out. I'm not a carb expert and this one was last rebuilt probably 15 years ago. Pics are below. Do I just need to rebuild the carb? Or is there something else up? Hopefully it's a simple fix.
You do not have the required permissions to view the files attached to this post.
1975 Ranger Edition that I've had longer than I've been without it.

OG
User avatar
phyler
CCB Admin
Posts: 1231
Joined: Sat Oct 02, 2010 8:41 pm

Re: Sprung a leak (fuel, that is)

Post by phyler »

Ok, after looking on YouTube, I think it's just the diaphragm on the accelerator pump. I happen to have a rebuild kit for my carb in the tool box. I'll try just replacing that and see how it goes.

Adam
1975 Ranger Edition that I've had longer than I've been without it.

OG
User avatar
Kinder
Official CCB Member
Official CCB Member
Posts: 4372
Joined: Wed Sep 29, 2010 9:03 pm

Re: Sprung a leak (fuel, that is)

Post by Kinder »

Agreed, since you have the kit I'd rebuild the whole thing.
Best to Date MPG: 26.6
User avatar
Justin
Official CCB Member
Official CCB Member
Posts: 6199
Joined: Sat Oct 09, 2010 11:04 pm

Re: Sprung a leak (fuel, that is)

Post by Justin »

X2. As long as it's off...
User avatar
sykanr0ng
Official CCB Member
Official CCB Member
Posts: 405
Joined: Thu Jan 22, 2015 12:46 am

Re: Sprung a leak (fuel, that is)

Post by sykanr0ng »

Justin wrote:X2. As long as it's off...


^^ And that's how the dreaded "While I'm at it's..." start. crazy :laughing2:

Not that it's a bad idea though.
"You say overkill like it's a bad thing."
User avatar
phyler
CCB Admin
Posts: 1231
Joined: Sat Oct 02, 2010 8:41 pm

Re: Sprung a leak (fuel, that is)

Post by phyler »

Haha, yep, it would fit with the current project downward spiral. Don't really want to rebuild it since I'm hoping to swap in the Explorer motor in about 8 weeks. Oh well, we'll see how it goes. Only carb I've ever rebuilt is the Amal one on my Triumph.
1975 Ranger Edition that I've had longer than I've been without it.

OG
DanHall
Official CCB Member
Official CCB Member
Posts: 151
Joined: Fri Jan 17, 2014 1:38 pm

Re: Sprung a leak (fuel, that is)

Post by DanHall »

I have a fresh rebuilt 2100 you are welcome to borrow until you swap to the exploder. I would like it back so I can rebuild my 302 someday but that isn't in the next couple of months. I rebuilt it thinking that was my problem. Ran for about five minutes before figuring out I have bigger issues... I have a 98 mountaineer for a donor ready to go pull so the 302 can be my longer term project.

It is probably easier to rebuild yours than drive down to Pueblo but if you want it for a while let me know.
User avatar
phyler
CCB Admin
Posts: 1231
Joined: Sat Oct 02, 2010 8:41 pm

Re: Sprung a leak (fuel, that is)

Post by phyler »

Thanks. Since I have the rebuild kit, I'm sure I can get it done. Just really didn't want to.

Appreciate it for sure.
1975 Ranger Edition that I've had longer than I've been without it.

OG
Post Reply