69 bronco stock drag link and pitman arm needed

[BillsFan76]

69 bronco with power steering in need of a stock drag link and Pitman arm to replace this looking setup on the bronco I just purchased. If anyone has something sitting around they may have upgraded from and no longer needs, please post or send me a message, I'd like to pick it up. Thanks,

Alex

[biohzrd]

l've got a pair of tie rods ,and a drag link off of a '71...l think they will work on a 69.
no pitman arm though.
the drag link you've got looks like the one that came off my 56 pu.

[DanHall]

I can go take a look, I think I still have the linkage from my '71 Bronco and a spare pittman arm from a '79 sitting around. If you're interested in a trip down to the Steel City let me know and I'll confirm I still have them before you head down. I had some wandering issues so I can't tell you how good the ball joints are but I think my big issue there was bushings on the trac bar. It all got replaced at the same time along with the worn out steering box.

[D&D72]

Have a stock pitman from a 72

[Justin]

If you're interested, I'm contemplating running off a batch of DOM steering linkages.

[BillsFan76]

Justin,

What does that mean, DOM? Would that replace the factory piece I'm looking for attack to it?

[Justin]

Drawn Over Mandrel. You use steel tube to replace the tie rod and drag link and use much beefier tie rod ends. Major upgrade in strength.

[Friday]

I have a almost new (10 miles or less) tie rod and drag link that was on my 66. It's the 3 way adjustable set up that WH sells. PM if your interested. I don't have the pitman arm.