free bronco treasures
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
free bronco treasures
I finally consolidated all the spare stuff I had stashed in the crawl space so here's the list.
1) Spindles, backing plates, hub and drums (11"x 2"), hardware and shoes off a front 44. (GONE)
2) Stock front coils (GONE) and rear leaf pack w/ urethane bushings (5 leaves with long add-a-leaf or overload on bottom). (REAR LEAVES GONE)
3) Stock radiator for std trans. (no cooler) No leaks when pulled, I replaced it with a new on with cooler when I did the C4 conversion. (GONE)
4) Stock "Armstrong" steering gear box with stock pitman arm. (GONE)
5) 4* urethane C bushings in good shape.
6) Std trans starter that worked well when replaced with auto starter. (GONE)
7) Splash shield, (GONE) bell housing, (GONE) flywheel, (GONE) clutch, pressure plate, RAT 3 speed trans (needs syncro in 1st gear)(GONE), and a 3 speed to Dana 20 adapter. (GONE)
8) Clutch pedal w/linkage and motor bracket. (GONE)
9) Hurst 3 speed floor shifter with linkage and a metal tunnel cover.
10) Old school fiberglass rear flares. (GONE)
I can bring any or all of this to the breakfast at Rudy's on Saturday if anyone wants any of it.
Mark.
1) Spindles, backing plates, hub and drums (11"x 2"), hardware and shoes off a front 44. (GONE)
2) Stock front coils (GONE) and rear leaf pack w/ urethane bushings (5 leaves with long add-a-leaf or overload on bottom). (REAR LEAVES GONE)
3) Stock radiator for std trans. (no cooler) No leaks when pulled, I replaced it with a new on with cooler when I did the C4 conversion. (GONE)
4) Stock "Armstrong" steering gear box with stock pitman arm. (GONE)
5) 4* urethane C bushings in good shape.
6) Std trans starter that worked well when replaced with auto starter. (GONE)
7) Splash shield, (GONE) bell housing, (GONE) flywheel, (GONE) clutch, pressure plate, RAT 3 speed trans (needs syncro in 1st gear)(GONE), and a 3 speed to Dana 20 adapter. (GONE)
8) Clutch pedal w/linkage and motor bracket. (GONE)
9) Hurst 3 speed floor shifter with linkage and a metal tunnel cover.
10) Old school fiberglass rear flares. (GONE)
I can bring any or all of this to the breakfast at Rudy's on Saturday if anyone wants any of it.
Mark.
Last edited by 71 Broncman on Fri Feb 05, 2016 5:44 am, edited 6 times in total.
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: free bronco treasures
I'd take the front d44 parts and the 3 speed.
- Dirtheadz
- Official CCB Member

- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
Re: free bronco treasures
I would be interested in the steering box/ pitman arm & radiator. I'll be at the breakfast!
!!! Being original is a blueprint for followers !!!
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
Justin wrote:I'd take the front d44 parts and the 3 speed.
They're yours. You going to be at the B-fast Saturday?
Last edited by 71 Broncman on Mon Sep 14, 2015 4:08 am, edited 1 time in total.
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
Dirtheadz wrote:I would be interested in the steering box/ pitman arm & radiator. I'll be at the breakfast!
I'll be there with your name on them.
Mark.
- phyler
- CCB Admin
- Posts: 1231
- Joined: Sat Oct 02, 2010 8:41 pm
Re: free bronco treasures
I'm interested in fiberglass flares if they are intact. I can't make the breakfast but maybe someone could bring them north?
1975 Ranger Edition that I've had longer than I've been without it.
OG
OG
- Justin
- Official CCB Member

- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: free bronco treasures
Not sure yet, can make other arrangements if not.
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
phyler wrote:I'm interested in fiberglass flares if they are intact. I can't make the breakfast but maybe someone could bring them north?
They are intact. The welting is even mostly intact. I'll bring them and see if we can find them a ride North.
Mark.
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
Justin wrote:Not sure yet, can make other arrangements if not.
No problem. I'll bring them to Rudy's with your name on them. We should be able to find someone to get them up to you.
Mark.
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: free bronco treasures
I would like the radiator, I'll be at the breakfast. THANKS!!!
- phyler
- CCB Admin
- Posts: 1231
- Joined: Sat Oct 02, 2010 8:41 pm
Re: free bronco treasures
71 Broncman wrote:phyler wrote:I'm interested in fiberglass flares if they are intact. I can't make the breakfast but maybe someone could bring them north?
They are intact. The welting is even mostly intact. I'll bring them and see if we can find them a ride North.
Mark.
Awesome. Thank you!
1975 Ranger Edition that I've had longer than I've been without it.
OG
OG
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
76fordbronco wrote:I would like the radiator, I'll be at the breakfast. THANKS!!!
Already spoken for, sorry.
Mark.
- Moab Mike
- Official CCB Member

- Posts: 1945
- Joined: Mon Jan 03, 2011 1:59 pm
Re: free bronco treasures
71 Broncman wrote:76fordbronco wrote:I would like the radiator, I'll be at the breakfast. THANKS!!!
Already spoken for, sorry.
Mark.
I see that now, thanks anyway!
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: free bronco treasures
I'll take the splash shield, flywheel and bellhousing and manual starter
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: free bronco treasures
Oh and pedal assembly and mount
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
Colorado75bronc wrote:I'll take the splash shield, flywheel and bellhousing and manual starter
Sent from my SAMSUNG-SM-G890A using Tapatalk
They're yours. I'll have them at Rudy's Saturday.
Mark.
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
Colorado75bronc wrote:Oh and pedal assembly and mount
Sent from my SAMSUNG-SM-G890A using Tapatalk
Also yours.
Mark.
- Colorado75bronc
- Official CCB Member

- Posts: 996
- Joined: Fri Oct 22, 2010 6:13 pm
Re: free bronco treasures
Give them to Ben aka. Dirtheadz if you wouldn't mind, I have to work unfortunately. Thank you very much, I'm getting ready to complete a manual swap from an auto for a friend and need all the manual parts I can get. I appreciate it very much.
Sent from my SAMSUNG-SM-G890A using Tapatalk
Sent from my SAMSUNG-SM-G890A using Tapatalk
75' bronco, 302, carb'd for now, i'm gathering parts for efi, 3g alternator, saginaw pump, 4x4x2 box, fw hp44, fw 9", N.P. 435 w/ gearbanger shifter, twin stick'd dana 20, 2" BL, 5.5" wildhorses lift, and 35" km2's
-
71 Broncman
- Official CCB Member

- Posts: 132
- Joined: Sun Nov 21, 2010 9:09 am
Re: free bronco treasures
Colorado75bronc wrote:Give them to Ben aka. Dirtheadz if you wouldn't mind, I have to work unfortunately. Thank you very much, I'm getting ready to complete a manual swap from an auto for a friend and need all the manual parts I can get. I appreciate it very much.
Sent from my SAMSUNG-SM-G890A using Tapatalk
My pleasure. It's a WIN/WIN as far is I'm concerned. I get to spread some Bronco karma and make space in the garage, others receive parts they can use.
Mark.