Dirtheadz #4 (think I would learn)
-
phyler
- CCB Admin
- Posts: 1231
- Joined: Sat Oct 02, 2010 8:41 pm
Re: Dirtheadz #4 (think I would learn)
I don't keep score anymore. The Bronco is so far ahead. :-)
1975 Ranger Edition that I've had longer than I've been without it.
OG
OG
-
Dirtheadz
- Official CCB Member
- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
Re: Dirtheadz #4 (think I would learn)
So since I'm fruggle (ok cheap) I've decided to build my own hydroboost bracket similar to the one on eBay.
You do not have the required permissions to view the files attached to this post.
!!! Being original is a blueprint for followers !!!
-
Dirtheadz
- Official CCB Member
- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
Re: Dirtheadz #4 (think I would learn)
Thanks AkaFrankcastle for letting use a OE, PB bracket for the template.
You do not have the required permissions to view the files attached to this post.
!!! Being original is a blueprint for followers !!!
-
ZOSO
- Moderator
- Posts: 3910
- Joined: Mon Nov 15, 2010 4:58 pm
Re: Dirtheadz #4 (think I would learn)
hey build me one. I've been meaning to order the one off ebay but i'd rather support a local guy if he wants a few bucks.
Rob
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
74 Ranger EFI351w, 4r70w, ARB 5.13 9in, ARB 5.13D44, and a bunch of other goodies. Best of all the family memories.
04 Mustang Cobra, KenneBell 2.2 feeding a lot of boost on E85. Tire shredding machine
New project: 77 Bronco Ranger, body work and more body work.
Very little left of a 72 durango tan explorer sport
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Dirtheadz #4 (think I would learn)
Hmmmm, tech day? I've been eyeballing those as well since I think I'll need the EFI clearance.
-
Dirtheadz
- Official CCB Member
- Posts: 929
- Joined: Thu Jan 27, 2011 8:27 pm
Re: Dirtheadz #4 (think I would learn)
I've got the paper templates, but I'll tell ya... It's no fun and not a quick process. Think I've got about $40 into it. 3/16 plate, 3/8" female heim, 1/2" all thread, bronze bushing, 10" of left over DOM & about an hour on the drill press. I wanted the hydro plunger equal to the pedal rod height so the face where the hydro bolts too is about 1-1/2" lower than the rear (I think). Have about 1/8" off the inner fender well
!!! Being original is a blueprint for followers !!!