Wiper delay switch and box

Post by **akaFrankCastle** » Thu Nov 05, 2015 11:54 am

Like the title says. Looking for more than two speeds this winter.

Post by **Justin** » Thu Nov 05, 2015 12:51 pm

I'd take one as well if someone has a second spare

Post by **Dirtheadz** » Thu Nov 05, 2015 5:23 pm

Justin wrote:I'd take one as well if someone has a second spare

X3... or at least a delay switch!!!

Post by **Gunnibronco** » Thu Nov 05, 2015 5:50 pm

I never ran across one, and bought from this guy:

http://classicbroncos.com/forums/showth ... p?t=254585

He was sorta flaky but eventually I got one.

Post by **rt9** » Thu Nov 05, 2015 7:41 pm

Got one at the Sadelia junk yard from an 83 F250. Awesome!

Sent from my SM-P600 using Tapatalk

Post by **akaFrankCastle** » Thu Nov 05, 2015 8:54 pm

Hmm. I'd forgotten the same box was used after the dent sides. Guess I'm heading back to the yard tomorrow during lunch.

Post by **landshark** » Thu Nov 05, 2015 9:09 pm

I need one too [emoji1]

Post by **akaFrankCastle** » Thu Nov 05, 2015 9:40 pm

Dang. Is this one of those things were someone goes "need this part" and everyone thinks "crap, I forget to look for those at the yard. I need one too!"

Post by **Justin** » Thu Nov 05, 2015 9:50 pm

Exactly.

Post by **hockeydad4-22** » Fri Nov 06, 2015 6:27 am

I put one in Drews before we hauled it to 29palms in the Cali desert where it never rains.... shrug

Getting plenty of use now I suppose.

Post by **rt9** » Fri Nov 06, 2015 7:48 am

Not sure if anyone has had problems with this setup, but I found this article pretty helpful. Seems the solder joints are weak and might need a little "love".
http://www.fullsizebronco.com/forum/23- ... -type.html

Post by **akaFrankCastle** » Sun Nov 08, 2015 3:03 pm

Post by **sykanr0ng** » Sun Nov 08, 2015 10:10 pm

This is the guy I bought mine from:

http://classicbroncos.com/forums/showth ... p?t=260184

Sells the Cherokee type wiper arms, the control box, or both.
Not bad to deal with.

Post by **sykanr0ng** » Sun Nov 08, 2015 10:18 pm

Just checked evilBay, they're all over $50, gone up about $15-$25 since last I looked.

Post by **Justin** » Sun Nov 08, 2015 10:35 pm

Hmmmm, I think I'm going to Pueblo later this week....

Post by **akaFrankCastle** » Mon Nov 09, 2015 7:41 am

Justin wrote:Hmmmm, I think I'm going to Pueblo later this week....

When? I've already cleaned them and soldered new ring terminals for the grounds. I still need to test them and rewrap the harnesses.

Post by **Eck** » Mon Nov 09, 2015 8:09 am

I'd buy one if you're selling!

Post by **akaFrankCastle** » Mon Nov 09, 2015 8:17 am

Eck wrote:I'd buy one if you're selling!

Justin, Dirtheadz, and Landshark have first dibs on three of the four. The fourth is going in to my truck.

I picked every one I found at the yard. I'll keep checking back and post up when more come in.

Post by **Justin** » Mon Nov 09, 2015 9:38 am

Sweet, thanks! It's looking like I'll be coming through on thursday.

Post by **landshark** » Mon Nov 09, 2015 9:50 am

thanks Zack - if you don't mind Justin can you ferry mine north?

Post by **Justin** » Mon Nov 09, 2015 9:51 am

Yup, happy to transport them north.

Post by **Viperwolf1** » Mon Nov 09, 2015 10:08 pm

I think you need to swap a terminal in those '80s switches. I believe it's the washer wire that needs to move.

Post by **akaFrankCastle** » Mon Nov 09, 2015 10:28 pm

Viperwolf1 wrote:I think you need to swap a terminal in those '80s switches. I believe it's the washer wire that needs to move.

Thanks for the heads up. It just couldn't possibly be plug and play and be a Ford part.

Post by **akaFrankCastle** » Tue Nov 10, 2015 12:36 am

Viperwolf1 wrote:I think you need to swap a terminal in those '80s switches. I believe it's the washer wire that needs to move.

Just read through Lars article on the 7 wire/6 wire switches. As luck would have it, all the boxes I pulled were 6 wire. So, it looks like none of them need modified.

http://classicbroncos.com/centechwiperswitch.shtml

Post by **akaFrankCastle** » Tue Nov 10, 2015 10:56 am

Eck wrote:I'd buy one if you're selling!

You're up if you want one.

Post by **Eck** » Tue Nov 10, 2015 10:58 am

akaFrankCastle wrote:
Eck wrote:I'd buy one if you're selling!

You're up if you want one.

I do. Let me know how much and how to pay you. If you're meeting up with Justin, you can give it to him.

Post by **ZOSO** » Tue Nov 10, 2015 1:40 pm

I wanna be next in line if any extras come up.

Post by **akaFrankCastle** » Tue Nov 10, 2015 2:05 pm

ZOSO wrote:I wanna be next in line if any extras come up.

Word. I'll put you on the list.

Post by **mickphatmac** » Wed Nov 11, 2015 9:28 pm

If anyone has "those 2 metal thingy's" I have a wiper delay switch that I'll trade you - eh!?

Post by **akaFrankCastle** » Thu Nov 12, 2015 9:01 pm

Switches have gone north with Justin.

www.ColoradoClassicBroncos.com

Wiper delay switch and box

Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box

Re: Wiper delay switch and box