Core support bracket
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Core support bracket
Anyone have one or two of these laying around: http://shop.broncograveyard.com/66-77-B ... fo/14008S/? I'm hoping that someone who tubed their front clip has one.
-
Gunnibronco
- Official CCB Member
- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: Core support bracket
I'll look and see. My core support is still in the scrap pile at work.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Core support bracket
If they're still there all 3 would be appreciated. I need at least one for a second battery on the drivers side. The vertical parts are what I need.
Sent from my SM-N920V using Tapatalk
Sent from my SM-N920V using Tapatalk
-
akaFrankCastle
- Official CCB Member
- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: Core support bracket
The Project X tub will soon be headed to the recyclers. I can cut these off before it goes.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
landshark
- Official CCB Member
- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
Re: Core support bracket
How is the core support on project x? if its not too much trouble i would love to have a section of it from the center to the driver side, i will need a section in there to patch a rot area on mine eventually.
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Core support bracket
akaFrankCastle wrote:The Project X tub will soon be headed to the recyclers. I can cut these off before it goes.
That would be awesome, thanks! I think I'm going to Pueblo on Friday if that works.
-
Gunnibronco
- Official CCB Member
- Posts: 4077
- Joined: Mon Jan 03, 2011 5:07 pm
Re: Core support bracket
Mine are hammered sh*t. You don't want them.
"America is at that awkward stage. It's too late to work within the system, but too early to shoot the bastards." ΓÇô Claire Wolfe
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
74-AWB 98", ZF5, Atlas4, HP609s, ARBs, 37's, 3.5" lift-5.5" front coil springs, Tahoe rear springs, EFI 302, h-boost, 4x4x2 hyrdo assist, custom dash & gauges
72 U15- Explorer Sport-Candyapple Red (1 of 141)
-
akaFrankCastle
- Official CCB Member
- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: Core support bracket
landshark wrote:How is the core support on project x? if its not too much trouble i would love to have a section of it from the center to the driver side, i will need a section in there to patch a rot area on mine eventually.
Will let you know. I plan to offer it up for chopping and vulturing once I get it back north.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
akaFrankCastle
- Official CCB Member
- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: Core support bracket
Justin wrote:akaFrankCastle wrote:The Project X tub will soon be headed to the recyclers. I can cut these off before it goes.
That would be awesome, thanks! I think I'm going to Pueblo on Friday if that works.
It doesn't work. X is still in Penrose and I'm thinking Saturday, at the earliest, before I pick it up. Will let you know what plays out.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
plumbdoctor
- Official CCB Member
- Posts: 568
- Joined: Tue Oct 05, 2010 9:17 pm
Re: Core support bracket
Chris, I have a half section here already cut if you want it....justin, I have some of the verticals here, and Zack, if the whole core support is good I would like it, also need inner wheel wells if they are good....lets talk swap
Your sh!* is my bread and butter!
-
Justin
- Official CCB Member
- Posts: 6199
- Joined: Sat Oct 09, 2010 11:04 pm
Re: Core support bracket
Sweet, thanks!
Sent from my SM-N920V using Tapatalk
Sent from my SM-N920V using Tapatalk
-
akaFrankCastle
- Official CCB Member
- Posts: 4901
- Joined: Wed Oct 27, 2010 5:25 pm
Re: Core support bracket
plumbdoctor wrote:Chris, I have a half section here already cut if you want it....justin, I have some of the verticals here, and Zack, if the whole core support is good I would like it, also need inner wheel wells if they are good....lets talk swap
I'm gonna go out on a limb and say you won't be interested in any of that stuff from this tub. At best, I think you could pull pieces and parts. But as far as whole pieces go, not so much.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.
The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.
1973 Stroppe Baja project
-
landshark
- Official CCB Member
- Posts: 3942
- Joined: Thu Oct 13, 2011 11:16 pm
Re: Core support bracket
Great thanks.
1976 Bronco "Green, Yellow, whatever", 1969 Bronco "Red", 1972 Bronco Stocker "Kind of Blue/Grayish"