Misc. parts wanted

Post by **BroncoRaider** » Sun Dec 06, 2015 11:41 pm

I have a few things that I'm looking for:
1. bezel tool for dash - done
2. windsheild knobs
3. dash pad
4. kids next door + baseball = I need a passenger vent window - done
5. long shot i know, but i was also going to order a 1" urethane body lift from WH - done

If anyone has any of the above I'd like to get all of this within the next 10 days or so. Please let me know if you have any of the items above that you can part with. Thanks.

Post by **ZOSO** » Mon Dec 07, 2015 5:46 am

PM hockeydad for the glass.

Post by **phyler** » Mon Dec 07, 2015 3:20 pm

Wild Horses has their 1" body lift on sale including free shipping.

http://www.wildhorses4x4.com/product/Cu ... n=specials

Post by **DanHall** » Mon Dec 07, 2015 5:38 pm

If you are not going for that stock look for the knobs, I used something like these https://m.mscdirect.com/mobileweb/produ ... arts=false

I'm nowhere near stock and I dig the dark anodized look since I don't have much in the way of chrome in my interior. I don't remember the thread size or pitc. Oh, and the previous owner had replaced the stock knobs with bolts so I needed something better.

Post by **BroncoRaider** » Mon Dec 07, 2015 8:06 pm

Those look like they would be fine with me. I have bolts too.

Post by **Gunnibronco** » Mon Dec 07, 2015 8:41 pm

I think I have one windshield knob floating around. If you want it you can have it. I can UPS/USPS or wait till there is a parts shuttle.

Post by **BroncoRaider** » Tue Dec 08, 2015 10:03 am

Gunni,
Thanks for the offer, I really like the industrial knobs that Dan suggested. I think I will go that route.
Tim

Post by **Gunnibronco** » Tue Dec 08, 2015 12:08 pm

Cool. I like them too. I need to do something when I put my truck back together. I've been running 1 knob & 1 bolt since I bought the truck in 1996. I was going to use black oxide bolts, but those knobs are cool.

Post by **BroncoRaider** » Tue Dec 08, 2015 2:27 pm

I cant seem to find them with 2" of threads, but found 1 3/4" of threads, any issues with that? My top will stay on and I don't plan on ever folding the windshield.
Tim

Post by **DanHall** » Tue Dec 08, 2015 5:33 pm

BroncoRaider wrote:I cant seem to find them with 2" of threads, but found 1 3/4" of threads, any issues with that? My top will stay on and I don't plan on ever folding the windshield.
Tim

It has been a while but I believe I got 3" of thread. They were certainly longer than I needed because I know I had to cut them down. I can't drop the windshield either. Between the cage coming up in front of them and the hood scoop it just don't work.

Post by **Gunnibronco** » Tue Dec 08, 2015 5:36 pm

I can't find mine to measure. But they sell the knob with a threaded insert, instead of a stud. You could cut all-thread to whatever length necessary & use a little loc-tite to set it in the knob.

https://m.mscdirect.com/mobileweb/produ ... arts=false

Post by **Gunnibronco** » Tue Dec 08, 2015 5:42 pm

2" knob, 3" thread length, 3/8"x16 thread

https://m.mscdirect.com/mobileweb/produ ... arts=false

Post by **BroncoRaider** » Sat Jan 23, 2016 9:51 am

I'm adding something to the list.

How about the center bracket for the spare tire mount on the inside of the tailgate?

www.ColoradoClassicBroncos.com

Misc. parts wanted

Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted

Re: Misc. parts wanted