Rox Crusher's 77 sport

[Rox Crusher]

Pretty much copying Viper's build

Going to use same cam as Phil with GT40P heads with BH headers (the fit / spark plug clearance isn't an issue).

[Rox Crusher]

or something more fun?

I wish I could do something more fun but just far too many other priorities draining the life out of my Bronco fund.

[Rox Crusher]

Didn't get to work on it much over the holidays but got this installed and wired up.

I still need to wire in the auto-dim cancel function (when in reverse) and maybe a door switch so the courtesy light comes on automatically.

image.jpeg

[mickphatmac]

(Nice work, I'll be waiting for your write up and pictures to document how I can do the same :)
BUT,

What in the what???
70┬░ in your garage and there's snow on the ground... dude...
Yeah OK, I'm jealous! My toes get frostbite just going out to get a pop out of soda fridge!

[Moab Mike]

Didn't get to work on it much over the holidays but got this installed and wired up.

I still need to wire in the auto-dim cancel function (when in reverse) and maybe a door switch so the courtesy light comes on automatically.

image.jpeg

What's that out of?

[Rox Crusher]

(Nice work, I'll be waiting for your write up and pictures to document how I can do the same :)
BUT,

What in the what???
70┬░ in your garage and there's snow on the ground... dude...
Yeah OK, I'm jealous! My toes get frostbite just going out to get a pop out of soda fridge!

I mighta had that propane heater cranked up a little too far !

: )

[Rox Crusher]

Didn't get to work on it much over the holidays but got this installed and wired up.

I still need to wire in the auto-dim cancel function (when in reverse) and maybe a door switch so the courtesy light comes on automatically.

image.jpeg

What's that out of?

I don't know some sort of closely guarded secret. I've been trying to find one for a couple years now in the yards or on eBay without luck.

So, I gave in and bought it from a guy on CB.com. I think he may still have some.

http://classicbroncos.com/forums/showth ... p?t=245500

Phil found one in the yard with the integrated compass but no temp sender. He might have paid "slightly" less than me.

[Viperwolf1]

Didn't get to work on it much over the holidays but got this installed and wired up.

I still need to wire in the auto-dim cancel function (when in reverse) and maybe a door switch so the courtesy light comes on automatically.

image.jpeg

What's that out of?

I don't know some sort of closely guarded secret. I've been trying to find one for a couple years now in the yards or on eBay without luck.

So, I gave in and bought it from a guy on CB.com. I think he may still have some.

http://classicbroncos.com/forums/showth ... p?t=245500

Phil found one in the yard with the integrated compass but no temp sender. He might have paid "slightly" less than me.

$6, $8 if you add in the browsing fee.

20151210_115434.jpg

20151210_155552.jpg

[Rox Crusher]

Phil, do you have a wiring diagram that shows the best place to tap into the reverse lights ?

[Viperwolf1]

Phil, do you have a wiring diagram that shows the best place to tap into the reverse lights ?

Right here. I think '77s still used this connector. You want the black-red wire.

c-243.jpg

[Rox Crusher]

thank you kindly Phil

[Rox Crusher]

Well today we pretty well determined that I no longer have a Plan B for the Bronco Celebration.

I was counting on the old reliable 5.0 if my 351 didn't get done in time.

Now Plan A is the only plan.

[Gunnibronco]

That's surprising. It was a used Exporer transplant, right? Details?

[Rox Crusher]

That's surprising. It was a used Exporer transplant, right? Details?

Yes, it was a craigslist used Explorer motor which looked super clean so it was installed as is.

Not 100% certain what the verdict is but I have been troubleshooting it since September when one rowdy evening had me hard on the skinny pedal.

Thought it was fuel or ignition but have pretty well ruled that out.

P-heads and BC headers deterred me from completing the compression and / or leak down tests. Phil wanted to press ahead but I lost interest.

It's been a great motor but no time to look back..........351 full speed ahead !

[Gunnibronco]

Oh well.

At least it involved a heavy right foot and rowdieness.

[ZOSO]

Dang! but you will like the 351 once it's finished. time for a hood scoop/body lift.

[JGZ]

351!!That's just a starter motor..

[Rox Crusher]

351!!That's just a starter motor..

I pale in comparison to Big Mike's motors.

[JGZ]

Two of our motors wouldn't add up to that displacement.

[Rox Crusher]

Gotta take advantage of the next few days of nice weather to install this

image.jpeg

[ZOSO]

did you come pull that outta my garage?

[Rox Crusher]

did you come pull that outta my garage?

Mine probably has more rust........gotta sand it down and paint it after getting it where I want it.

[Rox Crusher]

Got the exhaust and headers out today (at least a week later than planned)

Started pulling the 5.0, hope to have it out next Saturday morning

[Rox Crusher]

Got the 5.0 out today.

Hoped to get the evil body lift on but not just yet.

[Gunnibronco]

Hoped to get the body lift on but not just yet.

Is this bizaro world? LOL.

[Viperwolf1]

Hoped to get the body lift on but not just yet.

Is this bizaro world? LOL.

It's "things you have to do to fit an efi 351w under a stock hood" world.

[landshark]

You can get away with a 1" body lift and 351w correct?

[Viperwolf1]

You can get away with a 1" body lift and 351w correct?

Not really. Needs more like 1 3/4".

[Rox Crusher]

You can get away with a 1" body lift and 351w correct?

Not really. Needs more like 1 3/4".

We're gonna test the constraints of physics.

[sykanr0ng]

You can get away with a 1" body lift and 351w correct?

Not really. Needs more like 1 3/4".

We're gonna test the constraints of physics.

Just slam the hood a few more times, it'll fit.