Spare Wheel Needed

Missing that critical piece to your build or resto?
Post Reply
Brent13
Official CCB Member
Official CCB Member
Posts: 48
Joined: Tue Oct 06, 2015 8:19 am

Spare Wheel Needed

Post by Brent13 »

I am looking for a wheel to mount my spare tire on. Looking for a 15 x 8. Looking to mount a 33-10.50x15 tire. Trying not to be too particular, but would love to match this wheel. I have no idea what the brand is. I don't expect to find an identical 5th wheel, so whatever you have, I'd probably be interested.

Image

Thank You.
Brent
1974 Bronco, 302, C4
User avatar
Eck
Official CCB Member
Official CCB Member
Posts: 2462
Joined: Thu Oct 25, 2012 8:33 pm

Re: Spare Wheel Needed

Post by Eck »

Looks like it could be these if you are looking for a matching spare:

http://www.summitracing.com/parts/are-1 ... ArwG8P8HAQ
69 Wagon, 351W, Explorer EFI & Serpentine, ZF5, 35" tires, 3.5 SL, 2 BL, WARN 8274
Brent13
Official CCB Member
Official CCB Member
Posts: 48
Joined: Tue Oct 06, 2015 8:19 am

Re: Spare Wheel Needed

Post by Brent13 »

How the heck did you find that, that quickly? Looks very close, but too polished. Mine are very dull. Maybe they used to be polished, and need cleaned, not sure?
1974 Bronco, 302, C4
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Spare Wheel Needed

Post by Jesus_man »

Yeah, with A LOT of elbow grease, you could get yours to a mirror finish as well!
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
Brent13
Official CCB Member
Official CCB Member
Posts: 48
Joined: Tue Oct 06, 2015 8:19 am

Re: Spare Wheel Needed

Post by Brent13 »

Maybe I will buy the new polished wheel, and try and dull it to look like my other four. That sounds a whole lot easier.
1974 Bronco, 302, C4
User avatar
Jesus_man
Official CCB Member
Official CCB Member
Posts: 5988
Joined: Thu Nov 11, 2010 9:36 am

Re: Spare Wheel Needed

Post by Jesus_man »

One winter hanging off the back of your bronco with the mag chloride they spray on the roads ought to do it!
1973 Bronco, 351 SEFI, Locked, discs, 35's ZF-5spd and Atlas 4spd. 235:1 Crawl Ratio. It may be ugly, but it's slow.
http://www.ucora.org
User avatar
kbank6
Official CCB Member
Official CCB Member
Posts: 306
Joined: Sun Apr 14, 2013 4:00 pm

Re: Spare Wheel Needed

Post by kbank6 »

So now I know where to get my 5th wheel. I got 4 from the yard up here and haven't seen anymore for a while. You could always buy the new complete shinny set so I could buy your old ones....
73 Ranger (Holy Crap, replacing the door post is so much fun!)
B.O.B.
Official CCB Member
Official CCB Member
Posts: 777
Joined: Thu Nov 11, 2010 9:31 am

Re: Spare Wheel Needed

Post by B.O.B. »

I could get you one and probably cheaper. Let me know.
71' bronco, np435 w/trailbanger, 302 efi, 35" KM3 on 17x9 Fuel Anza, warn xd9000i, cage arms, 5" lift
User avatar
mickphatmac
Official CCB Member
Official CCB Member
Posts: 1810
Joined: Fri Mar 16, 2012 9:26 am

Re: Spare Wheel Needed

Post by mickphatmac »

Are you still looking for these?...

Even in the Springs! (too wide?)

https://cosprings.craigslist.org/pts/5439419552.html
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: Spare Wheel Needed

Post by akaFrankCastle »

mickphatmac wrote:Are you still looking for these?...

Even in the Springs! (too wide?)

https://cosprings.craigslist.org/pts/5439419552.html


I'm picking those up at 3:30. No punchline.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
User avatar
mickphatmac
Official CCB Member
Official CCB Member
Posts: 1810
Joined: Fri Mar 16, 2012 9:26 am

Re: Spare Wheel Needed

Post by mickphatmac »

akaFrankCastle wrote:
mickphatmac wrote:Are you still looking for these?...

Even in the Springs! (too wide?)

https://cosprings.craigslist.org/pts/5439419552.html


I'm picking those up at 3:30. No punchline.

Good buy...I thought you were trying to get rid of stuff? Always accumulating!!!
1968 3.5" Lift on 31's Front serpentine belt ViperBuilt 4x4x2 PS C4 '66 Speedo '66 Horn Button- STROPPE goodies: Steering Wheel, Roll Bar, Cactus Smasher
SOLD :(1972 Explorer Sport - '66 Eyebrow Grill - '66 Speedometer - Stroppe Steering Wheel - Stroppe RollBar - ViperBuilt C4
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: Spare Wheel Needed

Post by akaFrankCastle »

mickphatmac wrote:
akaFrankCastle wrote:
mickphatmac wrote:Are you still looking for these?...

Even in the Springs! (too wide?)

https://cosprings.craigslist.org/pts/5439419552.html


I'm picking those up at 3:30. No punchline.

Good buy...I thought you were trying to get rid of stuff? Always accumulating!!!


Same wheels that were on my grey Bronco when I bought it. And, too good of a deal to pass up. That being said, I have a plan to get Brent the wheel he needs. Because I know where three more of these are. And they're for sale at an even better price than this.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
Brent13
Official CCB Member
Official CCB Member
Posts: 48
Joined: Tue Oct 06, 2015 8:19 am

Re: Spare Wheel Needed

Post by Brent13 »

Crap, I missed the CL ad! I am all ears, you have located others? Looking for 15x8.

Thank you
1974 Bronco, 302, C4
User avatar
akaFrankCastle
Official CCB Member
Official CCB Member
Posts: 4901
Joined: Wed Oct 27, 2010 5:25 pm

Re: Spare Wheel Needed

Post by akaFrankCastle »

Brent13 wrote:Crap, I missed the CL ad! I am all ears, you have located others? Looking for 15x8.

Thank you


I'm hoping they're 15x8s. The ones I picked up were 15x10s.
Stroppe'd
1972 Sport, 302, 3 speed with old school Duff floor shifter, T shift Dana 20 with JB Fab twin stick, 4.11 gears with Trac-loc, Lincoln hydroboost, Chevy disc conversion, WH gas lift gate shock kit, 33" Duratrac tires on slots and about 2.5" of lift, Stroppe installed: bumper braces, dual shocks on all four corners, GM power steering, trans cooler mount, auto shift column, rollbar.

The Terrible One
1972 Sport uncut, 302, C4 with 1974 column , T shift Dana 20, 3.50 gears w/ limited slip, 1966 U13 Roadster kick panel, and factory power steering.

1973 Stroppe Baja project
Post Reply