CoSprings to Denver parts shuttle

Post by **hockeydad4-22** » Mon Jan 25, 2016 6:19 am

I have a box of parts at akaFrankCastle's compound (hardware, parts and pieces for the club rotisserie) that needs to make it north sometime this week. If nobody is making the trip this week, then next weekend I will be making the round trip and happy to shuttle parts for anyone who's parts need a ride.

Post by **akaFrankCastle** » Mon Jan 25, 2016 7:50 am

I've got stuff with Zoso and Justin. I also have some sheet metal for Kirk and Chris.

How about we split the difference? Castle Rock? Monument?

Post by **Justin** » Mon Jan 25, 2016 8:38 am

Rob, I'm headed to my Thornton site tomorrow and could probably swing by your work around 330 if you want to connect and transfer stuff.

Post by **hockeydad4-22** » Mon Jan 25, 2016 10:43 am

Any evening this week - other than tonight, I can probably make this work. Or this weekend if you prefer. Also potential daytime transit if my son Daniel has the day off

Folks with southbound freight should reach out soon so we can coordinate pick-up/delivery.

Post by **Kinder** » Mon Jan 25, 2016 12:01 pm

Yes please!

Post by **landshark** » Mon Jan 25, 2016 12:38 pm

As stated I have sheet metal from Zack and I bought a timing cover from another Ccb member who lives in the springs and near Zack. Let me see if I can get him to drop it off to make it easy.

Post by **ZOSO** » Mon Jan 25, 2016 2:43 pm

Justin wrote:Rob, I'm headed to my Thornton site tomorrow and could probably swing by your work around 330 if you want to connect and transfer stuff.

I can do that. I'll try to degrease everything as much as I can.

Post by **Justin** » Mon Jan 25, 2016 2:49 pm

Cool. It looks like I'll also be coming through your area around 11 or 12 if that works better.

Post by **akaFrankCastle** » Mon Jan 25, 2016 3:10 pm

landshark wrote:As stated I have sheet metal from Zack and I bought a timing cover from another Ccb member who lives in the springs and near Zack. Let me see if I can get him to drop it off to make it easy.

Parts have delivered to me.

Post by **landshark** » Mon Jan 25, 2016 4:44 pm

akaFrankCastle wrote:
landshark wrote:As stated I have sheet metal from Zack and I bought a timing cover from another Ccb member who lives in the springs and near Zack. Let me see if I can get him to drop it off to make it easy.

Parts have delivered to me.

Thanks Zack and Greg - Greg I can run by your work when your back

Post by **akaFrankCastle** » Mon Jan 25, 2016 5:27 pm

hockeydad4-22 wrote:Any evening this week - other than tonight, I can probably make this work. Or this weekend if you prefer. Also potential daytime transit if my son Daniel has the day off

Folks with southbound freight should reach out soon so we can coordinate pick-up/delivery.

Thursday is my best day/night.

Post by **ZOSO** » Mon Jan 25, 2016 5:38 pm

Justin wrote:Cool. It looks like I'll also be coming through your area around 11 or 12 if that works better.

Either time works for me. Just txt me when you are on your way. I leave work at 4.

Post by **Justin** » Mon Jan 25, 2016 8:23 pm

Ok. Ill,likely do the later time.

Post by **hockeydad4-22** » Mon Jan 25, 2016 9:12 pm

Get me the parts heading down as soon as possible, worst case I will meet up and do the swap thing Thursday evening. Daniel has been talking about going down sooner but that depends on his work schedule.

I work right off Santa Fe and alameda. I'm there from 6am - 4:15 or so daily. Otherwise I can meet up after work to make the exchanges

Post by **akaFrankCastle** » Mon Jan 25, 2016 9:43 pm

hockeydad4-22 wrote:Get me the parts heading down as soon as possible, worst case I will meet up and do the swap thing Thursday evening. Daniel has been talking about going down sooner but that depends on his work schedule.

I work right off Santa Fe and alameda. I'm there from 6am - 4:15 or so daily. Otherwise I can meet up after work to make the exchanges

Greg, it's pretty much all my parts. Don't put yourself out just to wrangle up my stuff. Worst case, I will make the drive up next week.

Post by **Justin** » Mon Jan 25, 2016 11:41 pm

Want to swing by after work? I may be able to come out your way depending on timing and kid needs.

Post by **hockeydad4-22** » Tue Jan 26, 2016 6:20 am

akaFrankCastle wrote:
hockeydad4-22 wrote:Get me the parts heading down as soon as possible, worst case I will meet up and do the swap thing Thursday evening. Daniel has been talking about going down sooner but that depends on his work schedule.

I work right off Santa Fe and alameda. I'm there from 6am - 4:15 or so daily. Otherwise I can meet up after work to make the exchanges

Greg, it's pretty much all my parts. Don't put yourself out just to wrangle up my stuff. Worst case, I will make the drive up next week.

its no problem at all Zach, looks like Daniel is happy to come down to meet you, he has friends down there he wants to see anyway, the only issue is he won't know until Weds evening if he works the next day or not. As for me... I just found out I have potential plans on Thursday so I may/may not be able to work it out to come down myself.

Justin. Give me a call/text when you have gotten together with Rob and I will make a western loop home

Post by **Justin** » Tue Jan 26, 2016 8:35 am

Will do.

Post by **hockeydad4-22** » Wed Jan 27, 2016 6:29 am

Picked up a small pile of parts from Justin after work yesterday, who picked them up from Zoso earlier in the afternoon. All set to meet up tomorrow evening if that still works for you. I am off work at 4ish so can be in Castle Rock anytime after 4:45, Monument by 5:15 or your place in the springs after that. Or later in the evening if that works for you. Shoot me a text with your details when you get a chance.

Post by **akaFrankCastle** » Wed Jan 27, 2016 6:29 pm

Transfer complete.

Post by **Kinder** » Thu Jan 28, 2016 6:13 am

Thanks a bunch. We need a stampede sound effect to play any time the parts train runs.

Post by **hockeydad4-22** » Thu Jan 28, 2016 7:29 am

I have a truck full of parts:

Landshark - I have a box and core support for you. The core support still has the inner fender for Kirk attached so I am going to run by Kirk's tonight after work today and we will separate the parts. Then I can come by your place tomorrow after work if that works for you

Kirk - I have an inner fender and tailgate parts for you - will be by tonight with them - have your drill ready!

Shawn Gregg - Your out of luck, I have absolutely no idea when I am heading north at this time. I have your box in my truck at work (Santa Fe and Alemeda) where I spend most weekdays days from 6am - 4pm. If anyone is heading further north and coming by this area - I am sure he would appreciate your help and probably even share his pink zip ties with you.

Post by **landshark** » Thu Jan 28, 2016 8:06 am

Thanks Greg. I will be out of town tomorrow but if you do have a chance to stop by you can go through the side gate from the front and leave them in the back yard. Or I will come by Monday or Tuesday when Iam back.

Post by **Gregg** » Thu Jan 28, 2016 8:19 am

hockeydad4-22 wrote:I have a truck full of parts:

Landshark - I have a box and core support for you. The core support still has the inner fender for Kirk attached so I am going to run by Kirk's tonight after work today and we will separate the parts. Then I can come by your place tomorrow after work if that works for you

Kirk - I have an inner fender and tailgate parts for you - will be by tonight with them - have your drill ready!

Shawn Gregg - Your out of luck, I have absolutely no idea when I am heading north at this time. I have your box in my truck at work (Santa Fe and Alemeda) where I spend most weekdays days from 6am - 4pm. If anyone is heading further north and coming by this area - I am sure he would appreciate your help and probably even share his pink zip ties with you.

Thanks Greg. There isn't any rush on my end. We can meet up at a B-fast or something.
Cool.

Post by **phyler** » Thu Jan 28, 2016 8:44 am

Shawn, I'm going to the Tech center tomorrow and could swing by Greg's work. Then you would only need to get to Erie. Let me know.

Post by **hockeydad4-22** » Thu Jan 28, 2016 12:12 pm

phyler wrote:Shawn, I'm going to the Tech center tomorrow and could swing by Greg's work. Then you would only need to get to Erie. Let me know.

Yeah Shawn - let him know.

I will keep your box in the truck thru the weekend - after that it gets tossed in the garage, and if you have ever experienced the black hole void that my garage becomes at times (like trying to find that tool or part I just put down in that safe place where I would not forget where I put it dammit!!!) you might reconsider having me hang onto it for any length of time.

Post by **hockeydad4-22** » Thu Jan 28, 2016 12:13 pm

Chris - we shall see what Friday afternoon brings to my schedule.

Post by **landshark** » Thu Jan 28, 2016 4:49 pm

hockeydad4-22 wrote:Chris - we shall see what Friday afternoon brings to my schedule.

sounds good thanks

Post by **Gregg** » Fri Jan 29, 2016 11:54 am

hockeydad4-22 wrote:
phyler wrote:Shawn, I'm going to the Tech center tomorrow and could swing by Greg's work. Then you would only need to get to Erie. Let me know.

Yeah Shawn - let him know.

I will keep your box in the truck thru the weekend - after that it gets tossed in the garage, and if you have ever experienced the black hole void that my garage becomes at times (like trying to find that tool or part I just put down in that safe place where I would not forget where I put it dammit!!!) you might reconsider having me hang onto it for any length of time.

Hey Phyler,
That'd be great. I hate being threatened with someones black hole.
Thanks guys!

Post by **phyler** » Fri Jan 29, 2016 12:48 pm

I'm in the tech center now. I pinged Greg to try and meet up.

www.ColoradoClassicBroncos.com